d0ngt Posted March 9, 2018 Share Posted March 9, 2018 Hello, i stop my array to shutdown. After that i want to restart and the array stuck on mounting disks. The only way to change this is a reboot, but the array will not mount after that at all. I have done "diagnostics" command an attach the outout. Someone an idea? unraid-diagnostics-20180309-1036.zip Quote Link to comment
trurl Posted March 9, 2018 Share Posted March 9, 2018 Autostart disabled. Unclean shutdown? Did you try to start it or were you just waiting for it to start itself? Quote Link to comment
d0ngt Posted March 9, 2018 Author Share Posted March 9, 2018 (edited) Autostart is disabled. I shutdown the whole machine. to carry it arround. after that its comming up again i click start und not much happend. Edited March 9, 2018 by d0ngt Quote Link to comment
trurl Posted March 9, 2018 Share Posted March 9, 2018 3 minutes ago, d0ngt said: to carry it arround. Likely something has come loose then. Try reseating cards, reseating cables, etc. Quote Link to comment
d0ngt Posted March 9, 2018 Author Share Posted March 9, 2018 This was my first idea too. I reconnect every plug. Quote Link to comment
trurl Posted March 9, 2018 Share Posted March 9, 2018 What about 18 minutes ago, trurl said: reseating cards Quote Link to comment
d0ngt Posted March 9, 2018 Author Share Posted March 9, 2018 I resaetet the card for about 10 min ago, i forgot to say Quote Link to comment
JorgeB Posted March 9, 2018 Share Posted March 9, 2018 All disks are mounted on that screenshot. Quote Link to comment
d0ngt Posted March 9, 2018 Author Share Posted March 9, 2018 yeah but no shares are up, no vms and docker tab says "Array must be started to view Docker containers." Quote Link to comment
JorgeB Posted March 9, 2018 Share Posted March 9, 2018 Please post new diags since disks weren't mounted on the ones you posted. Quote Link to comment
d0ngt Posted March 9, 2018 Author Share Posted March 9, 2018 Here it is. unraid-diagnostics-20180309-1506.zip Quote Link to comment
JorgeB Posted March 9, 2018 Share Posted March 9, 2018 Don't see an obvious issue, try rebooting in safe mode. Quote Link to comment
d0ngt Posted March 9, 2018 Author Share Posted March 9, 2018 Save Mode seems to work. What to do next Quote Link to comment
trurl Posted March 9, 2018 Share Posted March 9, 2018 Saw this in another thread recently, don't know if it's relevant here: https://lime-technology.com/forums/topic/69913-resolved-server-is-starting-services/?tab=comments#comment-639781 Quote Link to comment
JorgeB Posted March 9, 2018 Share Posted March 9, 2018 Uninstall all plugins then reinstall one by one. Quote Link to comment
d0ngt Posted March 9, 2018 Author Share Posted March 9, 2018 Thanks for that advice. It worked. A little bit irritating, but it helps. Quote Link to comment
trurl Posted March 9, 2018 Share Posted March 9, 2018 1 hour ago, d0ngt said: Thanks for that advice. It worked. A little bit irritating, but it helps. Installing them one at a time was not intended to be a method of fixing the problem. It was intended to help isolate the problem to a specific plugin. Quote Link to comment
wobblewoo Posted October 16, 2018 Share Posted October 16, 2018 I'm having the same issue after a power cut. It starts in Safe Mode but otherwise just says: Array Starting•Mounting disks... I did also try to uninstall a new plugin but when i did i just got a blank popup window - is that because the array is still starting as it also says waiting for 192.x.x.x in the web window? Im going to guess its doing some sort of disk check after the power out - can i see some kind of progress? Thanks. Diangostic Zip attached W tower-diagnostics-20181016-1315.zip Quote Link to comment
trurl Posted October 16, 2018 Share Posted October 16, 2018 1 hour ago, wobblewoo said: It starts in Safe Mode Your diagnostics don't indicate you are starting in SAFE mode. 1 hour ago, wobblewoo said: I'm having the same issue after a power cut. What may seem like the same problem often isn't, and in the future you should really start your own support thread. It can be difficult to keep things straight when trying to support multiple people on the same thread. Advice intended for one might be accidentally used by another with disastrous consequences, for example. This is just one reason "thread hijacking" is discouraged. I am only saying all that as a general principle for you to consider for future postings. Since this particular thread was abandoned months ago, let's just continue your support here in this thread. Quote Link to comment
wobblewoo Posted October 16, 2018 Share Posted October 16, 2018 The diags are from a normal boot. It boots in Safe mode and boots without autostart enabled but as soon as i start the array, it just says mounting disks. I can also start the array in maintenance mode. Im just checking the parity, lets see if it mounts after that. Also completely understand the thread hijack. Quote Link to comment
wobblewoo Posted October 17, 2018 Share Posted October 17, 2018 So the parity checked just fine. I've now started the array again and its stuck on Array Starting•Mounting disks... Quote Link to comment
wobblewoo Posted October 17, 2018 Share Posted October 17, 2018 Got it. A User script that was set to run when the array started for rclone was stopping the array from starting. it worked before i upgraded to 6.6.1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.