Rakha Posted September 7, 2019 Share Posted September 7, 2019 Hey. After I changed the motherboard, CPU and RAID card, the system has become unstable and needs to be restarted in order to respond and the transfer speed to and from Unraid has been slow. In the log I can see this error coming up many times "ata19.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen" I've changed all the sata cables and plugged in a new 750w power supply. I've attached a diagnostics dump and System log. I hope you can help with thoughts in a direction It would be appreciated. System log all.txt langhoff-diagnostics-20190907-0916.zip System log Error and warning.txt Quote Link to comment
trurl Posted September 7, 2019 Share Posted September 7, 2019 Looks like a controller issue since multiple disk connections are affected. Quote Link to comment
Rakha Posted September 7, 2019 Author Share Posted September 7, 2019 I have a "DeLOCK SATA PCIe x2 89384" and o don't see if I can update the firmware? Quote Link to comment
Kevek79 Posted September 7, 2019 Share Posted September 7, 2019 Does the controller card have a Marvel Controller ? Quote Link to comment
Squid Posted September 7, 2019 Share Posted September 7, 2019 It's a JMicron chipset which *should* be fine. However, it uses Port Multipliers to get the 10 Sata Ports out of the controller. Port Multipliers, even under ideal circumstances suck and are trouble prone. Quote Link to comment
Rakha Posted September 7, 2019 Author Share Posted September 7, 2019 Thank you very much for the answers. If "just" is a controller, then it's something to do. I don't know if it's against the rules. But which controller would you suggest? Quote Link to comment
Squid Posted September 8, 2019 Share Posted September 8, 2019 If you need that many ports then definitely something LSI based Sent from my NSA monitored device Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.