[Support] FoxxMD - shoginn-dump1090


FoxxMD

20 posts in this topic Last Reply

Recommended Posts

Application Name: shoginn-dump1090

Application Site: https://github.com/flightaware/dump1090

Github Repo: https://github.com/ShoGinn/dump1090

Docker Hub: https://hub.docker.com/r/shoginn/dump1090 @ShoGinn❤️

Template Repo: https://github.com/FoxxMD/unraid-docker-templates

 

Overview

 

dump1090 is a program that outputs ADSB data by decoding it from a software-accessible radio device. This data can be used to identify and track aircraft. This application works well with these other community apps:

 

 

 

Usage

 

dump1090 is typically used in conjunction with one or more other applications that consume the data it outputs. This application template provides default port mapping for the two types of data feeds, raw and BEAST, which these other applications will consumes.

 

You must map a compatible host device into this container in order for dump1090 to work properly (instructions linked). In most cases this is an RTL-SDR usb device. 

Edited by FoxxMD
formatting
Link to post

@PSYCHOPATHiO Gone are the days where only the container your rtl-sdr device is attached to can use it -- now that you can expose the port it is feeding to anything can consume it!

 

I didn't have time to get these published today but I have templates for flightradar24 and flightaware that I will hopefully get published tomorrow. You can consume the adsb data from dump1090 using those dockers. @ShoGinn has additional dockers I haven't had a chance to look at yet that can also consume this data. Perhaps a self-hosted flight tracker web ui as well? :)

 

Stay tuned! I'll have more apps within this ecosystem up shortly (and will edit the OP when they are)

Link to post
  • 4 weeks later...

@jandro4321 The dockerfile does not expose port 8080 (which is where the internal webserver serves from) and I'm also not sure if any extra is required to start the internal webserver, other than starting dump1090. This is a question @ShoGinn would be able to answer!

 

However you can also use shoginn-vrs (in Community Apps) to get a much more fully featured aircraft tracking app and use this app as the data source for it.

Edited by FoxxMD
Link to post
  • 2 weeks later...

I created the dump1090 docker to only be the binary.. the webpage is just a json dump that is read.. you can always add --write-json and then find the lighthttpd config and public_html files..

 

But the VRS is a much better way of getting the information.

 

 

Link to post
  • 2 months later...

So... how do I get this to even download?

It worked a couple of weeks ago (but the feeders didn't), but now when I try to download via CommApps I just get this

 

root@localhost:# /usr/local/emhttp/plugins/dynamix.docker.manager/scripts/docker run -d --name='shoginn-dump1090' --net='bridge' -e TZ="Europe/Berlin" -e HOST_OS="Unraid" -p '30002:30002/tcp' -p '30005:30005/tcp' --device='/dev/bus/usb/001/006' --cap-add=SYS_NICE 'shoginn/dump1090:latest' 
Unable to find image 'shoginn/dump1090:latest' locally
/usr/bin/docker: Error response from daemon: pull access denied for shoginn/dump1090, repository does not exist or may require 'docker login': denied: requested access to the resource is denied.
See '/usr/bin/docker run --help'.

edit:

turns out the whole docker hub is offline, so are most of the other Shoginn containers... =(

Edited by Sayuuk
Link to post
5 minutes ago, PSYCHOPATHiO said:

@FoxxMDwhats wrong with all shoginn dockers, cant update or re-download them anymore

Because

 

On 4/24/2020 at 11:42 AM, daves said:

It looks like shoginn has pulled most of his projects from dockerhub

They're now being removed from CA and a notice will go out via FCP

Link to post

I've reached out to shoginn on discord but have not gotten a response. He has archived most of his repos on github :(

 

When I have some time I will see about forking them and re-publishing on dockerhub under my own account. 

Link to post
On 4/29/2020 at 4:13 PM, FoxxMD said:

I've reached out to shoginn on discord but have not gotten a response. He has archived most of his repos on github :(

 

When I have some time I will see about forking them and re-publishing on dockerhub under my own account. 

I'd really appreciate that!

Link to post
  • 1 month later...

Hey folks, I forked the repositories of @ShoGinn on Github and pushed the images on Docker https://github.com/unraid-docker

 

I was able to install dump1090 and flightradar and the data seems to be sent perfectly https://www.flightradar24.com/account/feed-stats/?id=22484

 

@FoxxMD if you want you can update the urls in your templates ☺️ https://github.com/FoxxMD/unraid-docker-templates/tree/master/foxxmd

Link to post
  • 3 months later...
On 6/13/2020 at 1:16 PM, yazu said:

Hey folks, I forked the repositories of @ShoGinn on Github and pushed the images on Docker https://github.com/unraid-docker

 

I was able to install dump1090 and flightradar and the data seems to be sent perfectly https://www.flightradar24.com/account/feed-stats/?id=22484

 

@FoxxMD if you want you can update the urls in your templates ☺️ https://github.com/FoxxMD/unraid-docker-templates/tree/master/foxxmd


Ok, i've tried to install the VRS docker using this but having no joy. Any chance of some idiot proof instructions to getting a VRS docker running in UnRaid?

Failing that, I might just spin up a small VM.

Link to post
  • 5 months later...

I don't know if I'm missing something here, but I can't get dump1090 to show up in Unraid community applications. In the settings, I have told it not to hide anything and show additional results to no avail.

Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.