garethsnaim Posted January 20, 2020 Share Posted January 20, 2020 (edited) Hi there. I have successfully got a number of dockers going, transmission, plex and roon all run fine. But lots of dockers I simply cannot get past the first hurdle, because the webgui says either server is not respond or err_connection_refused. For the most part I am using host, but have also tried various options int he networking bit. For instance I have tried installing nextcloud, apparently its running, the log shows nothing unusual, so far as I am aware the thing is working perfectly. In the above my assumption is I goto myip:443? Well that just results in connection refused, I tried with http and https just in case. Many other dockers in that host port actually show port 80, which when I select webgui just goes straight back to the unraid main page. Could someone give me an idea of what I am doing wrong and why I cannot access the webgui of a lot of dockers. I have also tried various Photo hosting apps, and other things always the same issue, it appears to be running but I cannot access the webgui. Many thanks Edited January 20, 2020 by garethsnaim Quote Link to comment
Squid Posted January 20, 2020 Share Posted January 20, 2020 3 hours ago, garethsnaim said: Many other dockers in that host port actually show port 80, 80 is a very common port used in apps. What you do though is on the template you change the "host" port to be something else: eg:8080 Generally, nothing you will ever use (when set to bridge / host) will ever connect via port 80 3 hours ago, garethsnaim said: I goto myip:443? Easy thing to do (and recommended) is from the docker page / dashboard, you click the icon and hit "WebUI" That takes you to the appropriate URL. Quote Link to comment
garethsnaim Posted January 21, 2020 Author Share Posted January 21, 2020 Hi there. Thats where I am going and it does not work. Says connection refused. I have tried different ports in the advanced bit of the docker set up as well. I have had this issue on numerous dockers. However this one has been updated in the last few days so I was hoping it would work. Other dockers work find but so far as I can tell its all very similar in the templates. I just find it bizarre there are no instructions for these various dockers, I guess because they should 'just work' and the user follow the instructions for the actual software, but I cannot get past first base. Quote Link to comment
garethsnaim Posted March 1, 2020 Author Share Posted March 1, 2020 Can anyone offer any insight to why this is happening, lots of dockers etc I would like to try but I cannot access web GUIs? I have changed their web gui ports, no dice. Quote Link to comment
superloopy1 Posted March 2, 2020 Share Posted March 2, 2020 (edited) I'm almost sure that for nextcloud the advice was that port 444 was recommended to avoid clashing with others. Give it a try. Edited March 2, 2020 by superloopy1 Quote Link to comment
Squid Posted March 2, 2020 Share Posted March 2, 2020 15 hours ago, garethsnaim said: Can anyone offer any insight to why this is happening, lots of dockers etc I would like to try but I cannot access web GUIs? I have changed their web gui ports, no dice. Not without screenshots, diagnostics etc. Open a new thread with your problems, and attach them there Quote Link to comment
superloopy1 Posted March 2, 2020 Share Posted March 2, 2020 Why would this require a new thread, just interested? Quote Link to comment
Squid Posted March 2, 2020 Share Posted March 2, 2020 40 minutes ago, superloopy1 said: Why would this require a new thread, just interested? Because your problem (if it still exists) may not be what @garethsnaim's problem is Quote Link to comment
superloopy1 Posted March 2, 2020 Share Posted March 2, 2020 2 hours ago, Squid said: Because your problem (if it still exists) may not be what @garethsnaim's problem is I haven't got the problem, @garethsnaim has. I was only offerring up my setup so that he could compare against his, which seems wrong to me. Think you picked it up the wrong way unfortunately. Quote Link to comment
garethsnaim Posted March 3, 2020 Author Share Posted March 3, 2020 This is my thread I thought it would be more polite to continue it rather than stat another Quote Link to comment
denzo Posted December 17, 2022 Share Posted December 17, 2022 I know this is an old thread but I have the same problem(s), did you ever find a solution? Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.