garethsnaim

Members
  • Posts

    71
  • Joined

  • Last visited

Everything posted by garethsnaim

  1. Hi. I want to copy stuff from another nas. in Krusader in the net connection I only have options for WebDav or FTP. I set up an FTP server on my nas, and can connect no issues with krusader, but as soon as I try and copy over to unraid it just says failed and sometimes something about too many connections 2. I use unassigned drives to connect to my nas via SMB from unraid, that seems to mount fine, yet it cannot be found anywhere in krusader, it feels like Krusader has no understanding of SMB. I am searching the web but coming up with nothing, anyone with an idea?
  2. Hi no I worked out late last night and its my silly. I run Roon as well. Roon has its own LMS server which must not be running as it uses the same port within Roon. So technically yes same port, but no way to know that from unraid.
  3. Hi, been running fine for days on a new unraid install. Today its decided that I 'cannot connect to server'. I deleted it and its folder from appdata, redownloaded same deal Tried on host and bridge same deal Tried in different browsers and on different computers same deal Th eonly red in the logs is this _XSERVTransmkdir: ERROR: euid != 0,directory /tmp/.X11-unix will not be created. Why would this work then decide its not working anymore? Very frustrating as I had the same issue with krusader on OMV that was so persistent I was forced to use Dolphin which is without doubt the ugliest interface ever. (but it works!)
  4. I have tried this docker and the 'real' docker all I get is the login screen. I'll move onto the next photos solution life is too short.
  5. Trying to install this, I have no GUI, browsers 'refuse to connect' Uninstalled, ditched the folder, reinstalled, same deal. Anything else I can try?
  6. Well I have been at this for hours. I simply cannot get it to resolve to my bitwarden. SWAG says server is running. I even changed to another DNS provider (duck) and again it says its functioning. I tried to adjust the vaultwarden conf file that SWAG creates to point to my DNS address (as instructed by spaceinviaderone) but this does not work and when I restart swag the conf file is overwritten by the original. Obviously this is something I am doing wrong but any pointers would be helpful. I am following the instructions to the letter. the outcome is I see a welcome to swag not bitwarden.
  7. Hi guys. I had this running great last year but for reasons in my own stupid mind thought I would try out OMV. Now I have returned to unraid for the life of me I cannot get Bitwarden running. I have installed swag and it seems to be running correctly saying server is ready. I don't have a domain so its going to my DDNS. Following SpaceInvaders instructions carefully I thought I was golden but when I go to my DDNS address it resolves to SWAG and not to Bitwarden. I can get to bitwarden on LAN, via the unraid address, but its set to use proxy web, along with SWAG. Spaceinvader offers a file download for 'subdomains' and skirts over this bit with barely any instruction, but I feel like I didn't need that file last time but perhaps I did? IN any case can anyone offer a suggestion why it resolves to the swag home page and not bitwarden as its driving me dolally
  8. Hello, I dont really know how to see whats using my CPU, I see the little bars going up and down its only an 8 core CPU. Recently it seems to be mostly pegged. Things are working ok I guess, I spotted this in the process monitor: root 4206 99.8 0.0 25176 8888 tty7 Rs+ Mar09 3080:04 /usr/libexec/Xorg -novtswitch -allowMouseOpenFail -quiet -xinerama -v -s 0 -dpms -fp /usr/share/fonts/TTF vt07 -auth /var/run/slim.auth Is this something or just a snap shot in time, although to be fair I pulled it up a few times and that line is at circa 98% cpu
  9. Thanks Strike, thats comforting. I have a unifi router so its logging and telling me whats happening and blocking these connections so I guess it is what it is. Scary out there! It took me hours to get this going so I think I will leave cloudflare tunnel alone for now lol, is that a bit like ZeroTier?
  10. Hi all, I followed Space Invaders Ones great video on installing swag so that I can have a bitwarden server and its all working well I think. However in my unifi router, security is saying ports 180 and 1443 (forwarded from 80 and 443) are getting hit loads of times a day from around the world. Is this normal, or have a bodged up somewhere?
  11. OK thanks for that info. As long as its working as expect I am ok. The data seems to be protected which is the main thing.
  12. Hi Jorge, so just to confirm, I only have the one drive for cache now, so its fair not to expect that to show green? Slightly surprising as I had two disks before but they were in raid 0, which as far as I am aware means if one goes it all goes, and that always showed green across the board?
  13. Well I made a right pigs ear of this lol. It turns out what ever was happening with that raid card, was not pass through so the disks were not recognised off of it, which is fine I had a back up, but god knows what I did with the cache. I think probably I was better to have just started again, but I didnt it all seems to be working again, however App data, ISO"s, Domains and System folders are unprotected from the parity disk. This is because I copied them to disk 1 before moving the array. Then I fked up the cache somehow so created a new pool and called that newcahce and moved those folders to it, and then moved them back. Well blah blah but ultimately they are where they should be now, but unprotected. Could I expect the next time the parity disk is checked they will come into line or is there something else I need to do?
  14. Thanks that all makes sense I will give it. try!
  15. Hi, i will be moving my unraid to another server soon. At the moment I have 4 disks for data plus a parity disk however the new server has four slots so I will remove one of the data disks, I am happy how to do this. However all the disks are currently on a controller, I want to say H700 or something similar. However the set up was pass through I think, or set up as individual single disks. i.e. not a raid or anything. I don't think this device will fit the new server. Can I expect the data on the disks to be seen do you think in the new server on the basis that controller is now gone? Also on my current server I have 4 NICs in aggregation, again this card wont fit the new server. Is there a way to delete all that config? I also have two 1 TB ssds in raid 0 as the cache. Moving forward I am thinking to just have one 500gig. Is the easiest thing just to delete current dockers and start again? My other thought was to install the 500gig in the current and cipy the dockers across but could I expect the dockers to see that data in the new server? Any other considerations, I am a bit nervous. Not for data loss its all backed up, but if I can pull this off and not have to start afreash that would be awesome! Sad to be closing down my current server, but it used 4 KwH a day, I just cannot justify it, I barely use 3% of the CPUs, but at idle it still sucks up the electric.
  16. Hi this ran flawlessly on my iphone 11 I have just got an iphone 13 and it says 'could not connect' with my credentials which I know are correct, can someone tell me if I need to put something mores explicit in the host address, I am just putting IP, but it does not appear to even try just immediately says could not connect
  17. Can someone please explain how I fix InfluxDB Error: Bad Gateway. Its doing my head in. I have read every thread in the world about this. Everything seems to refer to docker compose, I just feel like every docker in community apps is broken some how and I would be better off with compose lol. Any hints for a moron here? I have everything else going influxdb is receiving data and I can easily access its web gui so I know its working. I have tried entering the Ip and entering the container name nothing works
  18. Ok so I changed the bond to be eth0 and the server told me to reboot which I did. I booted in GUI mode and can see the interface from there. Dockers can now reach the internet. But I cannot access the GUI from LAN
  19. I am having a strange issue. I have never really delved into VMs on unraid but as I cannot get timemachine to work on unraid itself I thought I would be clever and install a VM with OpenbMediaVault to manage that aspect. I have elected to put the main install on the cahce which is SSD, so fast I guess. I have allocated 12 cores and 8 gigs. The installer worked fine and quick and I could get to the interface but then something in the update went screwy and it would no longer boot (never had this issue on ESXi) so I tried again, deleted the VM created a new, different name etc. This time it starts out nice and quick again on installing OMV, but it got slower and slower and slower. What should be a 3 minute instal is upto 40 minutes now, with the progress bars barely moving. So I tried again. This time even worse. I have not tried rebotting the server yet, but thats what it feels like, ram run out or something (The dashboard says less than 5% is being used) What could cause this behaviour is there a setting I have gone wrong with somewhere, should I not use the cache?
  20. Well for me its a rhetorical question, because no it does not. I followed the instructions to set up a time machine share but it does not show on my two macs as an option. Can anyone else back up their BigSur via timemachine, what did you do different to the instructions provided?
  21. Ok I'll take a look, but surely a bond of 4 nics is not one mac address?
  22. Additional info on Nic one, the settings for it allow me to enter DNS. But the bond settings do not offer this. Evidently I need to make the Bond the main one, but unraid seems pretty wed to me using only Nic 1.
  23. Hi. I feel like I asked this years ago but can find no evidence. When I first set up unraid it was on a single ethernet lead into Nic 1. That worked fine. Today I tried setting up a bond on 4 other nics. And whilst it connects internally just fine, it cannot access the internet, none of my dockers work etc. I tried deleting the config files for network from the USB and start again, but this clearly does not delete all networking stuff because unraid complained that Nic1 was down and to plug in a cable. I know I had this problem before, but for the life of me I cannot recall how I fixed it. In short I dont want to use Nic1, I want to use the bond I created. Can someone give me a pointer?
  24. I did a new install of roon on unraid using this docker, getting major issues. It will run for a while then becomes unstable and seems to crash or at least cannot be seen on the network the docker is running. If I restart it, it comes back but the squeezebox devices on the network can no longer be found until I restart them, then it works again for a while before the cycle restarts. I see lots of this in the logs has mp3float: 1, aac_fixed: 0 Running Not responding Error Initializing Started Not responding aac_fixed decoder found, checking libavcodec version... has mp3float: 1, aac_fixed: 0 Running Not responding Error Not responding Initializing Started aac_fixed decoder found, checking libavcodec version... has mp3float: 1, aac_fixed: 0 Running Not responding [0;37;1m[0;0m00:00:00.002 [0;31mWarn: get lock file path: /tmp/.rnsgem0-[0;0m [0;37;1m[0;0m00:00:00.114 [0;36mTrace: [childprocess] using unix child process[0;0m Initializing Started aac_fixed decoder found, checking libavcodec version... has mp3float: 1, aac_fixed: 0 Running Not responding Error