Sour Posted March 19, 2020 Share Posted March 19, 2020 Hi everyone, I'm new to unraid and having problems. I'm using v. 6.8.2 I have 4 drives all 12 TB they were fully precleared. 2 parity and 2 it says unmountable no file system (don't know if that makes a difference or not). Do I need to do something about unmountables? Anyways, the real reason why I'm here. The array starts, I can navigate in unraid for a few minutes and it freezes at 0.4% the server gives me errors on web browser refreshing page. It times out and says taking too long to respond. On main page all drives and info are missing its blank and the animated unraid icon is thinking. Not sure what other info you might need but hopefully there is a fix for this. Many thanks! Sour Quote Link to comment
JorgeB Posted March 19, 2020 Share Posted March 19, 2020 3 minutes ago, Sour said: Do I need to do something about unmountables? You need to format them, next to array stop/start. You need to post the diagnostics (tools -> diagnostics) for the other issues. Quote Link to comment
Sour Posted March 20, 2020 Author Share Posted March 20, 2020 here is my diagnostics zip. Hope you can help me. when i did formatting it started the array again and froze once again. *sigh* Cheers mutant0-diagnostics-20200319-2015.zip Quote Link to comment
Squid Posted March 20, 2020 Share Posted March 20, 2020 Does anything appear on the locally attached monitor when this happens? Quote Link to comment
Sour Posted March 20, 2020 Author Share Posted March 20, 2020 3 minutes ago, Squid said: Does anything appear on the locally attached monitor when this happens? Um, I think it did but I am not sure. I just shut down and let it sit for 30 secs and started it up and paused array so I could do anything else among the tabs. Do you need me to look? what am I looking for? Quote Link to comment
Squid Posted March 20, 2020 Share Posted March 20, 2020 Hard to say. Take a pic next time it freezes. Something of interest may be there. Quote Link to comment
Sour Posted March 20, 2020 Author Share Posted March 20, 2020 I am learning as I go. Glad there is a community to help Linux ignorant people like myself. Okay so I started array again and clicked tools and browser said same thing, taking too long to load. Click back and the image is below. everything disappears and not functioning Quote Link to comment
trurl Posted March 20, 2020 Share Posted March 20, 2020 Just thought I should mention. This is not a general recommendation: 12 hours ago, Sour said: Do I need to do something about unmountables? 12 hours ago, johnnie.black said: You need to format them, next to array stop/start. For future reference, if you get unmountable disks that you think should have data on them, don't format. Quote Link to comment
Sour Posted March 20, 2020 Author Share Posted March 20, 2020 2 minutes ago, trurl said: Just thought I should mention. This is not a general recommendation: For future reference, if you get unmountable disks that you think should have data on them, don't format. HAHA, thanks. I knew they were blank (precleared) before i did any of this. Quote Link to comment
trurl Posted March 20, 2020 Share Posted March 20, 2020 Just now, Sour said: HAHA, thanks. I knew they were blank (precleared) before i did any of this. Many people think you can recover a formatted disk from parity. You can't since parity is updated during the format and agrees the disk is empty after that. The diagnostics you posted indicate the disks are mounted and the shares have data. And the Array Operations section of the screenshot seems correct. I wonder if this isn't just a browser problem. Have you tried another browser? Do you have any adblockers that might be interfering? 1 Quote Link to comment
Sour Posted March 20, 2020 Author Share Posted March 20, 2020 I'm in firefox. I dont know maybe I'll add exectption? Quote Link to comment
Sour Posted March 20, 2020 Author Share Posted March 20, 2020 I tried Microsoft edge browser and no its not browser. 35 minutes ago, Squid said: Hard to say. Take a pic next time it freezes. Something of interest may be there. there was stuff at the beginning but it went fast and this was the end. Quote Link to comment
Squid Posted March 20, 2020 Share Posted March 20, 2020 First thing I would do is run a MemTest from the boot menu for at least a couple of passes. If it doesn't start up, then manually select the boot device when booting to the NON-UEFI (ie: legacy or no tag) on the flash drive. Quote Link to comment
trurl Posted March 20, 2020 Share Posted March 20, 2020 Have you done memtest? Have you tried the Ryzen tweaks here? Quote Link to comment
Sour Posted March 20, 2020 Author Share Posted March 20, 2020 36 minutes ago, trurl said: Have you done memtest? Have you tried the Ryzen tweaks here? This right here is what is happening. Im overclocking ram dual ddr4 3200. I am gonna fix this in bios and see if it works. Quote Link to comment
Sour Posted March 20, 2020 Author Share Posted March 20, 2020 I have made it to 1 full % . It was the over clocking on ram for sure. I think I might go back to intel and use my amd ryzen for something else... Thanks again everyone! Sour Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.