dsimmond1225 Posted April 21, 2020 Share Posted April 21, 2020 Hi new to forum. I am running 6.5.3. My Plex stopped working and Docker is giving me time out errors on the github. I tried to update from instructions below and when going to the URL I get this: plugin: installing: https://s3.amazonaws.com/dnld.lime-technology.com/stable/unRAIDServer.plg plugin: downloading https://s3.amazonaws.com/dnld.lime-technology.com/stable/unRAIDServer.plg plugin: downloading: https://s3.amazonaws.com/dnld.lime-technology.com/stable/unRAIDServer.plg .. This update page is there for a long time. How long does this take? Any suggestions to get back up and running would be helpful. Quote Link to comment
trurl Posted April 21, 2020 Share Posted April 21, 2020 1 minute ago, dsimmond1225 said: Any suggestions to get back up and running would be helpful Go to Tools-diagnostics and attach the complete Diagnostics zip file to your NEXT post. I may move your post and any responses to its own thread since you may have a problem unrelated to the upgrade. Quote Link to comment
dsimmond1225 Posted April 21, 2020 Author Share Posted April 21, 2020 tower-diagnostics-20200421-0850.zip Quote Link to comment
Squid Posted April 21, 2020 Share Posted April 21, 2020 /boot/config/plugins -rwxrwxrwx 1 root root 1762 Mar 11 2017 dynamix.plg Delete dynamix.plg from /config/plugins on the flash drive, reboot then try again. Quote Link to comment
dsimmond1225 Posted April 21, 2020 Author Share Posted April 21, 2020 that did not work Deleting dynamix.plg from flash Quote Link to comment
Squid Posted April 21, 2020 Share Posted April 21, 2020 Your diagnostics showed you also updating other plugins. Did those work? Quote Link to comment
dsimmond1225 Posted April 21, 2020 Author Share Posted April 21, 2020 (edited) no. docker pull linuxserver/kodi-headless Using default tag: latest Error response from daemon: Get https://registry-1.docker.io/v2/: net/http: request canceled while waiting for connection (Client.Timeout exceeded while awaiting headers) The UPDATE to UNRAID gave me a network error message instead of doing nothing when trying to add container in docker the pull never pulls files down. Edited April 21, 2020 by dsimmond1225 additional comment Quote Link to comment
Squid Posted April 21, 2020 Share Posted April 21, 2020 2 minutes ago, dsimmond1225 said: network error message What exact error message? Try setting static DNS addresses of 208.67.220.220 and 208.67.222.222 in Settings - Network. Quote Link to comment
dsimmond1225 Posted April 21, 2020 Author Share Posted April 21, 2020 https://s3.amazonaws.com/dnld.lime-technology.com/stable/unRAIDServer.plg when put that in plugin install I get a POP up and it only has the DONE button. Prior to adding DNS in last post I would get the url in pop up. Quote Link to comment
Squid Posted April 21, 2020 Share Posted April 21, 2020 You may just need to update manually. Download the 6.8.3 zip from from limetech's website. Extract all of the bz* files in the zip and put them onto the flash drive (overwriting any that already exist). This is the exact same thing that the update via plugin does. (But, save a copy of the flash drive first just for safe keeping) Quote Link to comment
dsimmond1225 Posted April 21, 2020 Author Share Posted April 21, 2020 will try that. should this also fix my PLEX issues or is this another nightmare? Quote Link to comment
trurl Posted April 21, 2020 Share Posted April 21, 2020 Just now, dsimmond1225 said: will try that. should this also fix my PLEX issues or is this another nightmare? I would say the upgrade is unlikely to fix your plex issue, but we don't really know what the issue is since you haven't told us much about it. Sounds like you have some problem reaching the internet with your server, and that can cause certain kinds of plex problems. Your docker image is a little smaller than I normally recommend, but it is likely OK that way if you don't run many dockers. Quote Link to comment
dsimmond1225 Posted April 21, 2020 Author Share Posted April 21, 2020 thanks for your help. Do I just need copy over license file after update....using different USB drive so just in case. No issues for 4 years now this. Quote Link to comment
trurl Posted April 21, 2020 Share Posted April 21, 2020 21 minutes ago, dsimmond1225 said: Do I just need copy over license file after update....using different USB drive so just in case. Might be simpler to try it on the existing flash first unless you think there is some problem with that. The license is associated with the flash it is on. If you do decide to use a new flash, you can do a license transfer that will give a new license key file for the new flash. See the REPLACE REGISTRATION KEY link at the bottom of this page Quote Link to comment
dsimmond1225 Posted April 21, 2020 Author Share Posted April 21, 2020 ok....when prompted I got the warning that the drives would be "erased". The drives were setup in the right spot. Did not feel comfortable at the time so reverted back to the original version: I did get the error for the PLEX install: plugin: installing: https://s3.amazonaws.com/dnld.lime-technology.com/stable/unRAIDServer.plg plugin: downloading https://s3.amazonaws.com/dnld.lime-technology.com/stable/unRAIDServer.plg plugin: downloading: https://s3.amazonaws.com/dnld.lime-technology.com/stable/unRAIDServer.plg ... failed (Network failure) plugin: wget: https://s3.amazonaws.com/dnld.lime-technology.com/stable/unRAIDServer.plg download failure (Network failure) So it appears that the server cannot access anything out of my network. Should I open a new inquiry for this? Quote Link to comment
trurl Posted April 21, 2020 Share Posted April 21, 2020 1 hour ago, dsimmond1225 said: ok....when prompted I got the warning that the drives would be "erased". The drives were setup in the right spot. Did not feel comfortable at the time so reverted back to the original version: Not enough detail to know what you did or what might have happened there. A screenshot might have helped. Quote Link to comment
trurl Posted April 21, 2020 Share Posted April 21, 2020 Can you ping google.com from the command line on your server? Quote Link to comment
dsimmond1225 Posted April 21, 2020 Author Share Posted April 21, 2020 root@Tower:~# ping -n http://www.google.com ping: unknown host http://www.google.com Quote Link to comment
trurl Posted April 21, 2020 Share Posted April 21, 2020 2 minutes ago, dsimmond1225 said: root@Tower:~# ping -n http://www.google.com ping: unknown host http://www.google.com The website isn't going to respond to a ping. Just ping google.com Quote Link to comment
dsimmond1225 Posted April 21, 2020 Author Share Posted April 21, 2020 still unable to ping google.com unknown host Quote Link to comment
dsimmond1225 Posted April 23, 2020 Author Share Posted April 23, 2020 so after re-reading several posts there was something from a cat in a lime helmet (or something like that). He said that there was no way that this was an UNRAID bug. I went to the router and low and behold my UnRaid server was disabled. I enabled it and 30 minutes later I am updated. my PLEX is broken now but that is another thread. Thank you all for your patience and support. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.