bar1

is it still possible to use --allow-non-empty? if my power trip, some folder still remain and then the script can't mount when the power is back

plugins and updates work fine though....its only themes

everytime i try to look for new plugins i get this message: An unexpected error occurred. Something may be wrong with WordPress.org or this server’s configuration. If you continue to have problems, please try the support forums. any ideas? just running local wordpress at home...

can the google photos sync support more then 1 account?

you can just run fusermount -u /mnt/disks/Remote/xxx would be nice if the script can do it (and restart plex docker) i am not really a programmer but will give it a shot later

can the script handle transport endpoint is not connected issue?

Wait a second....the one drive i am testing on is not mine, and my access to it is read only.

alright , i deployed script 0.95.0 and it works. i am getting errors... mount failed - please check for problems. and Attempt 1/3 failed with 1 errors and: googleapi: Error 403: Insufficient Permission: Request had insufficient authentication scopes., and, mountcheck: Need to transfer - File not found at Destination 2020/02/14 17:16:30 ERROR : mountcheck: Failed to copy: googleapi: Error 403: Insufficient Permission: Request had insufficient authentication scopes., but the bottom line is: drive is mounted. will investigate the errors over the weekend.

Maybe i didn't understand correctly "and your rclone config (remote passwords) please" umm....that will be a very stupid thing to do?lol but i think the rclone config is good because i mount the drives "manually" just fine.

#!/bin/bash ###################### #### Mount Script #### ###################### ### Version 0.96.0 ### ###################### ####### EDIT ONLY THESE SETTINGS ####### # INSTRUCTIONS # 1. Edit the change the name of the rclone remote and shares to match your setup # 2. NOTE: enter RcloneRemoteName WITHOUT ':' # 3. Optional: include custom command and bind mount settings # 4. Optional: include extra folders in mergerfs mount # REQUIRED SETTINGS RcloneRemoteName="Bar1-xxx" # Name of rclone remote mount WITHOUT ':'. NOTE: Choose your encrypted remote for sensitive data #RcloneRemoteName="Bar1-xxx" # Name of rclone remote mount WITHOUT ':'. NOTE: Choose your encrypted remote for sensitive data LocalFilesShare="/mnt/user/Media" # location of the local files you want to upload without trailing slash to rclone e.g. /mnt/user/local RcloneMountShare="/mnt/user/Bar1-Rxxx" # where your rclone remote will be located without trailing slash e.g. /mnt/user/mount_rclone MergerfsMountShare="ignore" # location without trailing slash e.g. /mnt/user/mount_mergerfs of the share you will use for Plex, Sonarr etc that combines files on your server's 'LocalFilesShare' with files on gdrive 'RcloneMountShare' DockerStart="Bar1-xxx" # list of dockers, separated by space, to start once mergerfs mount verified. Remember to disable AUTOSTART in docker settings page MountFolders=\{"downloads/complete,downloads/intermediate,downloads/seeds,movies,tv"\} # comma separated list of folders to create within the mount # Note: Again - remember to NOT use ':' in your remote name above # OPTIONAL SETTINGS # Add extra paths to mergerfs mount in addition to LocalFilesShare LocalFilesShare2="ignore" # without trailing slash e.g. //mnt/user/. Enter 'ignore' to disable LocalFilesShare3="ignore" LocalFilesShare4="ignore" # Add extra commands or filters Command1="--rc" Command2="" Command3="" Command4="" Command5="" Command6="" Command7="" Command8="" CreateBindMount="N" # Y/N. Choose whether to bind traffic to a particular network adapter RCloneMountIP="192.168.1.201" # My unraid IP is 172.30.12.2 so I create another similar IP address NetworkAdapter="eth0" # choose your network adapter. eth0 recommended VirtualIPNumber="2" # creates eth0:x e.g. eth0:1. I create a unique virtual IP addresses for each mount & upload so I can monitor and traffic shape for each of them ####### END SETTINGS ####### ############################################################################### ######## DO NOT EDIT ANYTHING UNLESS YOU KNOW WHAT YOU ARE DOING ########## ############################################################################### ####### Preparing mount location variables ####### LocalFilesLocation="$LocalFilesShare/$RcloneRemoteName" # Location for local files to be merged with rclone mount RcloneMountLocation="$RcloneMountShare/$RcloneRemoteName" # Location for rclone mount MergerFSMountLocation="$MergerfsMountShare/$RcloneRemoteName" # Rclone data folder location ####### create directories for rclone mount and mergerfs mounts ####### mkdir -p /mnt/user/appdata/other/rclone/remotes/$RcloneRemoteName # for script files eval mkdir -p $LocalFilesLocation/"$MountFolders" mkdir -p $RcloneMountLocation mkdir -p $MergerFSMountLocation ####### Check if script is already running ####### echo "$(date "+%d.%m.%Y %T") INFO: *** Starting mount of remote ${RcloneRemoteName}" echo "$(date "+%d.%m.%Y %T") INFO: Checking if this script is already running." if [[ -f "/mnt/user/appdata/other/rclone/remotes/$RcloneRemoteName/mount_running" ]]; then echo "$(date "+%d.%m.%Y %T") INFO: Exiting script as already running." exit else echo "$(date "+%d.%m.%Y %T") INFO: Script not running - proceeding." touch /mnt/user/appdata/other/rclone/remotes/$RcloneRemoteName/mount_running fi ####### Check If Rclone Mount Already Created ####### if [[ -f "$RcloneMountLocation/mountcheck" ]]; then echo "$(date "+%d.%m.%Y %T") INFO: Success ${RcloneRemoteName} remote is already mounted." else echo "$(date "+%d.%m.%Y %T") INFO: Mount not running. Will now mount ${RcloneRemoteName} remote." ####### Create RClone Mount ####### # Check If Rclone Mount Already Created if [[ -f "$RcloneMountLocation/mountcheck" ]]; then echo "$(date "+%d.%m.%Y %T") INFO: Success ${RcloneRemoteName} remote is already mounted." else echo "$(date "+%d.%m.%Y %T") INFO: Mount not running. Will now mount ${RcloneRemoteName} remote." # Creating mountcheck file in case it doesn't already exist echo "$(date "+%d.%m.%Y %T") INFO: Recreating mountcheck file for ${RcloneRemoteName} remote." touch mountcheck rclone copy mountcheck $RcloneRemoteName: -vv --no-traverse echo "$(date "+%d.%m.%Y %T") INFO: Completed creation of mountcheck file for ${RcloneRemoteName} remote." # Check bind option if [[ $CreateBindMount == 'Y' ]]; then echo "$(date "+%d.%m.%Y %T") INFO: *** Checking if IP address ${RCloneMountIP} already created for remote ${RcloneRemoteName}" ping -q -c2 $RCloneMountIP > /dev/null # -q quiet, -c number of pings to perform if [ $? -eq 0 ]; then # ping returns exit status 0 if successful echo "$(date "+%d.%m.%Y %T") INFO: *** IP address ${RCloneMountIP} already created for remote ${RcloneRemoteName}" else echo "$(date "+%d.%m.%Y %T") INFO: *** Creating IP address ${RCloneMountIP} for remote ${RcloneRemoteName}" ip addr add $RCloneMountIP/24 dev $NetworkAdapter label $NetworkAdapter:$VirtualIPNumber fi else RCloneMountIP="" fi # create rclone mount echo "$(date "+%d.%m.%Y %T") INFO: *** Creating bind mount ${RCloneMountIP} for remote ${RcloneRemoteName}" rclone mount \ --allow-other \ --buffer-size 256M \ --dir-cache-time 720h \ --drive-chunk-size 512M \ --log-level INFO \ --vfs-read-chunk-size 128M \ --vfs-read-chunk-size-limit off \ --vfs-cache-mode writes \ --bind=$RCloneMountIP \ $RcloneRemoteName: $RcloneMountLocation & # Check if Mount Successful echo "$(date "+%d.%m.%Y %T") INFO: sleeping for 5 seconds" # slight pause to give mount time to finalise sleep 5 echo "$(date "+%d.%m.%Y %T") INFO: continuing..." if [[ -f "$RcloneMountLocation/mountcheck" ]]; then echo "$(date "+%d.%m.%Y %T") INFO: Successful mount of ${RcloneRemoteName} mount." else echo "$(date "+%d.%m.%Y %T") CRITICAL: ${RcloneRemoteName} mount failed - please check for problems." rm /mnt/user/appdata/other/rclone/remotes/$RcloneRemoteName/mount_running exit fi fi ####### Start MergerFS Mount ####### if [[ $MergerfsMountShare == 'ignore' ]]; then echo "$(date "+%d.%m.%Y %T") INFO: Not creating mergerfs mount as requested." else if [[ -f "$MergerFSMountLocation/mountcheck" ]]; then echo "$(date "+%d.%m.%Y %T") INFO: Check successful, ${RcloneRemoteName} mergerfs mount in place." else # check if mergerfs already installed if [[ -f "/bin/mergerfs" ]]; then echo "$(date "+%d.%m.%Y %T") INFO: Mergerfs already installed, proceeding to create mergerfs mount" else # Build mergerfs binary echo "$(date "+%d.%m.%Y %T") INFO: Mergerfs not installed - installing now." mkdir -p /mnt/user/appdata/other/rclone/mergerfs docker run -v /mnt/user/appdata/other/rclone/mergerfs:/build --rm trapexit/mergerfs-static-build mv /mnt/user/appdata/other/rclone/mergerfs/mergerfs /bin fi # Create mergerfs mount echo "$(date "+%d.%m.%Y %T") INFO: Creating ${RcloneRemoteName} mergerfs mount." # Extra Mergerfs folders if [[ $LocalFilesShare2 != 'ignore' ]]; then echo "$(date "+%d.%m.%Y %T") INFO: Adding ${LocalFilesShare2} to ${RcloneRemoteName} mergerfs mount." LocalFilesShare2=":$LocalFilesShare2" else LocalFilesShare2="" fi if [[ $LocalFilesShare3 != 'ignore' ]]; then echo "$(date "+%d.%m.%Y %T") INFO: Adding ${LocalFilesShare3} to ${RcloneRemoteName} mergerfs mount." LocalFilesShare3=":$LocalFilesShare3" else LocalFilesShare3="" fi if [[ $LocalFilesShare4 != 'ignore' ]]; then echo "$(date "+%d.%m.%Y %T") INFO: Adding ${LocalFilesShare4} to ${RcloneRemoteName} mergerfs mount." LocalFilesShare4=":$LocalFilesShare4" else LocalFilesShare4="" fi # mergerfs mount command mergerfs $LocalFilesLocation:$RcloneMountLocation$LocalFilesShare2$LocalFilesShare3$LocalFilesShare4 $MergerFSMountLocation -o rw,async_read=false,use_ino,allow_other,func.getattr=newest,category.action=all,category.create=ff,cache.files=partial,dropcacheonclose=true # check if mergerfs mount successful echo "$(date "+%d.%m.%Y %T") INFO: Checking if ${RcloneRemoteName} mergerfs mount created." if [[ -f "$MergerFSMountLocation/mountcheck" ]]; then echo "$(date "+%d.%m.%Y %T") INFO: Check successful, ${RcloneRemoteName} mergerfs mount created." else echo "$(date "+%d.%m.%Y %T") CRITICAL: ${RcloneRemoteName} mergerfs mount failed." rm /mnt/user/appdata/other/rclone/remotes/$RcloneRemoteName/mount_running exit fi fi fi ####### Starting Dockers That Need Mergerfs Mount To Work Properly ####### # only start dockers once if [[ -f "/mnt/user/appdata/other/rclone/remotes/$RcloneRemoteName/dockers_started" ]]; then echo "$(date "+%d.%m.%Y %T") INFO: dockers already started." else touch /mnt/user/appdata/other/rclone/remotes/$RcloneRemoteName/dockers_started echo "$(date "+%d.%m.%Y %T") INFO: Starting dockers." docker start $DockerStart fi rm /mnt/user/appdata/other/rclone/remotes/$RcloneRemoteName/mount_running echo "$(date "+%d.%m.%Y %T") INFO: Script complete" exit 14.02.2020 13:44:20 INFO: *** Starting mount of remote Bar1-xxxx 14.02.2020 13:44:20 INFO: Checking if this script is already running. 14.02.2020 13:44:20 INFO: Script not running - proceeding. /tmp/user.scripts/tmpScripts/Rclone/script: line 206: syntax error: unexpected end of file Script Finished Fri, 14 Feb 2020 13:44:20 +0200 Full logs for this script are available at /tmp/user.scripts/tmpScripts/Rclone/log.txt

can i make the script mount 2 drives? (like i tried to do).

ok i followed the instructions properly this time (i think...). but the drive doesn't map. i am getting this: /tmp/user.scripts/tmpScripts/Rclone/script: line 206: syntax error: unexpected end of file

stupid question, but if i want to use this script i need modify : /boot/config/plugins/rclone/scripts/rclone_mount_plugin/script ? seems like i can't modify it via the gui (toolong?) EDIT: busy installing:User Scripts

everything was working fine...i did a small change to cpu allocation , through basic editor and now i am stuck in a boot loop.... Can anyone assist? After fixing this: <loader readonly='yes' type='pflash'>xxx</loader> <nvram>xxx</nvram> I am getting something like loading boot003 "clover start boot.efi"

ok noted, i will install your plugin from the CA. I already have rclone mount docker up and running....so hopefully it wont conflict

plugin: installing: https://raw.githubusercontent.com/Waseh/rclone-unraid/master/rclone.plg plugin: downloading https://raw.githubusercontent.com/Waseh/rclone-unraid/master/rclone.plg plugin: downloading: https://raw.githubusercontent.com/Waseh/rclone-unraid/master/rclone.plg ... done plugin: downloading: http://downloads.rclone.org/rclone-v1.35-linux-amd64.zip ... failed (Invalid URL / Server error response) plugin: wget: http://downloads.rclone.org/rclone-v1.35-linux-amd64.zip download failure (Invalid URL / Server error response)

yes i did. I deleted everything nextcloud related, and reinstalled and waited an hour.

is this plugin still working? I am getting: plugin: installing: https://raw.githubusercontent.com/Waseh/rclone-unraid/beta/rclone.plg plugin: downloading https://raw.githubusercontent.com/Waseh/rclone-unraid/beta/rclone.plg plugin: downloading: https://raw.githubusercontent.com/Waseh/rclone-unraid/beta/rclone.plg ... done plugin: downloading: http://beta.rclone.org/v1.34-11-gbf243f3/rclone-v1.34-11-gbf243f3β-linux-amd64.zip ... failed (Invalid URL / Server error response) plugin: wget: http://beta.rclone.org/v1.34-11-gbf243f3/rclone-v1.34-11-gbf243f3β-linux-amd64.zip download failure (Invalid URL / Server error response)

New install

I am getting this in the log: Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (111) any ideas?

Hi everyone, is it possible to mount more then 1 drive? Do i need to create another docker or can i use the same one?