dam_j

I didnt get the part with "no credentials" in ubi... Sorry and thanks now it works!!

Here you go. The unifi log doesnt show anything blocked.

Hello, Sadly even after the update (thanks for that) my Unifi ups still doesn´t work. Anything else i can try?

Hey, I´m trying to get the new Ubuiqiti Tower UPS connected. Only configuration it has is enabling the internal NUT-Server and config a user which i have done. In the NUT Plugin i configure it as slave and give the Ip, user, password. After i start the plugin i don´t get any errors in the log but i also get no read from the ups. I can ping the UPS just fine from the unraid server. LOG says: Oct 21 14:10:44 TEST rc.nut: Writing NUT configuration... Oct 21 14:10:45 TEST rc.nut: Updating permissions for NUT... Oct 21 14:10:45 TEST rc.nut: Checking if the NUT Runtime Statistics Module should be enabled... Oct 21 14:10:45 TEST rc.nut: Disabling the NUT Runtime Statistics Module... Oct 21 14:10:46 TEST rc.nut: Network UPS Tools upsmon 2.8.4 release Oct 21 14:10:46 TEST rc.nut: UPS: [email protected] (secondary) (power value 1) Oct 21 14:10:46 TEST rc.nut: Using power down flag file /etc/nut/no_killpower Oct 21 14:10:46 TEST upsmon[608694]: Startup successful Oct 21 14:10:46 TEST upsmon[608694]: Warning: running as one big root process by request (upsmon -p) And thats it. Anything more that i can try? Thanks in advance

Hello, I tried to use this (great) video guide to make a USB-Backup: Backing Up Unraid with Duplicati: Complete Guide for Cloud, USB, Local and Remote Backups Im trying but is it possible that theres a problem with ZFS-Pools to backup source? Nevermind the script thingie my 12 TB backup finished immediately in unraid. But in duplicati i get I/O errors. I also can only chose the one big ZFS Pool as backup source, duplicati doesn´t show any subfolders etc. Thanks in advance

I love it! Thanks a lot

TerraMaster F8 SSD (Plus) would be great but since this thingie is a boring small blackbox the logo is more interesting? Thanks in advance !

What an "coincidence"... Mine will arrive for testing today! But thats great to hear!! Thanks

Hello, I´d set up an SSD only completely new UnRiad-Server and have a strange SSD behavior... In short over a 10GB-Network i get around 350 MB/s read speed from my Kingston DC450R which supports up to 560 MB/s (official specs). I thought thats a little bit low so i hooked up a Samsung 870EVO 1TB SSD today and from that i get around 510 MB/s over the same network... The rest of the server: https://geizhals.de/?cat=WL-2923167 The kingston SSD has the newest aviable FW. So is my Kingston SSD just bullshitting me or is there any extra setting i can try out ?? Worst cas i need to switch from 7.68TB Kingston SSD to 4TB Samsung SSD´s. But i have a hard time to believe that this "read-optimized" data centre SSD from Kingston is so much slower than a consumer one from Samsung. Thanks in advance!

And can ypu pleas elink me the board / controller ?

For example a Crucial P3 Plus SSD 4TB M.2 begins at 294,- Euro and there a few others at the same price range. Didn´t really think about used enterprise stuff, will have a look at that, thank you!

Thanks for the answer, 4TB SATA-SSD´s are (right now) more expensive than 4TB M.2 drives here in germany and i can still save the cache drive. I ordered a PCIe 16x card with 4x M.2 slots and PLX-chip. I will try if this thing has any big compronises. Since i need at least 16TB at the start with room to upgrade the 6x SATA connectors on most motherboards are not really enough for 4TB SSD´s.

Hello, I want my Server go all SSD and upgrade to Intel (Quicksync for Plex). Right now i´m thinking about the Gigabyte Z790 AORUS Master together with an Intel i7 13700K. The motherboard has 5x M.2 slots which would all be filled with 4TB drives which would give me 16TB + Parity. Now the big question, how can i add more ? Since i don´t believe (and can´t check) this board can´t use PCIe bifurcation 4x4x4x4 so i can´t use my Asus Hyperdrive card. As i understand now i need an adapter card with PLX chip and UnRaid can still see and use any drive individual without any problems, ist that right ?? Second question would be if there´s any recommended on ? I found for example the QNap qm2-4p-384 which can use 4x PCIe 3.0 M.2´s on a single PCIe 8x Port which would mean i can use in total 8x M.2 extra on this board. Am i right on track so far ?? Thanks in advance!

Done, also tops out at ca. 300MB/s.

Hello, My Problem; Since last week my LAN-Speed was going down from 10GB to 3GB... I can´t recall any special event besides me turning my cache drive off and later on again. I now have the exact same speed with my cache drive (Samsung 970 EVO Plus 2TB) on or off. What i tried so far: - Another 10GB-Switch (unmanaged) - Another Cat.6a cable - Another 10GB network card in my PC and on my UnRaid Server - Older windows driver - Completely new UnRaid install on new USB-Stick with no extra settings and no Plugins, Docker etc. and with the only array disk being a NVME drive (Samsung 970 EVO Plus 256GB) with the exact same result. - Linux (Ubuntu 22.10) instead of windows on my main machine - Directly attach the server to my pc with 10GB fiber cards without any switch iPerf and manual file it copy always comes down to around 3 Gbits/sec. Im really at the end here... Anyone any idea what else i can try ?? The Server worked with full 10GB and the exact same HW for over half a year now.

Yeah, like i wrote version 2.55.0.0 didn´t really does it for me and i´m not experienced enough to just use textedit...

Which exact version of the configurator tool is recommended ? After the use of the newest one and 2.55.0.0 my Montenary VM just can´t boot anymore... What "Mac´s" do you use in the configurator ? Thanks in advance.

Are you still giving up ? 🙂