SCSI

Successfully updated to 5b6 from 4.7 on my server. I did not have to re-add my disks. All my 6 HDs were detected and valid. Currently running a parity check.

Just ordered two! Thanks OP and to everyone for their feedback on this device.

Sold out I was too late.

If the next release is stable enough, I just might risk my server and use it. As long as Airvideo and subsonic continues to work properly with the new release, then I am set. Some advice on when to start using betas and new releases Thanks for the great guide bjp999. Added it to my favorites. That thread should stickied and on the WIKI.

If the next release is stable enough, I just might risk my server and use it. As long as Airvideo and subsonic continues to work properly with the new release, then I am set.

I'm an openelec user myself on a ZOTAC IONITX board. Switched over from XBMCfreak release last year. Been always wanting to try the Zbox.

Kapperz, Wow, you are quick in updating the ffmpeg Been away for a while and didn't check this thread. Thank you! PS: https support is added in the latest 4.4 beta

Thanks kapperz. I just downloaded the scripts04.zip. Will you be compiling FFmpeg 0.6.1 and updating your transcode.zip in the near future? Thank you very much for creating this tutorial.

Can't seem to find scripts04.zip in the OP's post. I will modify subsonic_copy_from_memory.sh manually and add those lines. In the process of updating to Subsonic 4.3 with video support Update: Updated to Subsonic 4.3 and video streaming is working great with the FFmpeg version 0.5.1 included by kapperz in the OP. Where can I find a pre-compiled FFmpeg 0.6.1?

I received mine today. Holy c***! It is bigger than I thought it would be lol!

Got a tracking number today with expected delivery for tomorrow You should be getting your soon.

Lol!

This is what I got after preclear on a new WD 2TB black. Looks like it is good except for the SMART error. Any suggestions? =========================================================================== = unRAID server Pre-Clear disk /dev/sdf = cycle 1 of 1 = Disk Pre-Clear-Read completed DONE = Step 1 of 10 - Copying zeros to first 2048k bytes DONE = Step 2 of 10 - Copying zeros to remainder of disk to clear it DONE = Step 3 of 10 - Disk is now cleared from MBR onward. DONE = Step 4 of 10 - Clearing MBR bytes for partition 2,3 & 4 DONE = Step 5 of 10 - Clearing MBR code area DONE = Step 6 of 10 - Setting MBR signature bytes DONE = Step 7 of 10 - Setting partition 1 to precleared state DONE = Step 8 of 10 - Notifying kernel we changed the partitioning DONE = Step 9 of 10 - Creating the /dev/disk/by* entries DONE = Step 10 of 10 - Testing if the clear has been successful. DONE = Disk Post-Clear-Read completed DONE Disk Temperature: 27C, Elapsed Time: 21:19:57 ============================================================================ == == Disk /dev/sdf has been successfully precleared == ============================================================================ S.M.A.R.T. error count differences detected after pre-clear note, some 'raw' values may change, but not be an indication of a problem 19,20c19,20 < Offline data collection status: (0x80) Offline data collection activity < was never started. --- > Offline data collection status: (0x84) Offline data collection activity > was suspended by an interrupting command from host. 58c58 < 7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0 --- > 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 63c63 < 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 14 --- > 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 15 ============================================================================

That's great guys! Have a great weekend!

Just got two from Target this morning. Some have WD Black on these. The ones I got seems to match the one with WD Blacks inside them but I can't confirm until I open them.

APC® Back-UPS XS Series Battery Backup, BX1500G, 1500VA/865 Watt for $99 at Office Depot http://www.officedepot.com/a/products/206137/APC-Back-UPS-XS-Series-Battery/ I came across this from http://slickdeals.net/forums/showthread.php?t=2420590 It's OOS but you can still order and Office Depot will honor the price when they become available. Just ordered one for my Unraid server

Just bought one from tigerdirect Although I prefer the Hitachi 7200rpm drives, I will try this Seagate for $60.

Got one too! Thanks!

Are there any good instructions to setup Subsonic using HTTPS/SSL and unRAID? I found tutorials using it with SSL and Windows. I found this tutorial and trying to understand it. lol! http://techtracer.com/2007/09/12/setting-up-ssl-on-tomcat-in-3-easy-steps/

Just received mine. Thank you very much!

I just discovered this customization and just got it working. AWESOME stuff! Thanks for the tutorial.

PM sent. Hopefully there are some left. I can't believe I missed this.

Both drives are WD20EADS. I should have mentioned that the 11.7 MBs is the max transfer rate when writing to the disk share. I get 45+ MBs when reading from the WD20EADS. I can write to my Hitachi 2TB (7200rpm) disk share at close to 40 MBs which is a big difference and won't require me to have a disk cache.

I just added two WD20EADS (5400rpm) and transfer rates to those HDs max at 11.7MBs while my Hitachi 2TB (7200rpm) max at 34-40MBs with parity on. Why is the big difference??