Techn0mancer

@snowboardjoe I get that when I use SSH and if I use the console from the docker icon I get "sh: sudo: not found"

I'm getting the following when I try to run the command

I'd really like to see a docker for Hubzilla "Hubzilla is a powerful platform for creating interconnected websites featuring a decentralized identity, communications, and permissions framework built using common webserver technology." https://project.hubzilla.org/page/hubzilla/hubzilla-project

I've been experiencing seemingly random reboots and today when it came back up, the plugin told me hardware errors were detected, to install mcelog (done) and post my diagnostics (where are these found?). Do I need to wait for the next crash to get the mcelog data?

I won't say I figured it out, but I beat my head against the keyboard until it started working

I followed the directions here http://lime-technology.com/forum/index.php?topic=53542.msg522472#msg522472 As far as I can see I didn't miss anything. I also get the same result trying to redirect myserver.com/htpcman to the HTPC Manager docker. For that I added: location ^~ /htpcman { include /config/nginx/proxy.conf; proxy_pass http://10.11.12.106:8085/htpcman; }

So eventually letsencrypt started. Now I can't get it to redirect traffic to nextcloud. I have port 443 open and I've followed, to the best of my knowledge, the configuration instructions I've found, but using nextcloud.myserver.com results in connection refused. If I try nextcloud.myserver.com:7443 (the port forwarded for nextcloud), it does connect to my server so the domain is resolving to my ip

2 things that come to mind as i also just bought a new namecheap domain and went through this yesterday: 1) You need an A + Dynamic DNS record for @ and also anything else you define. In my case that was also 'www' and 'nextcloud' 2) do you have dynamic dns setup? is that your correct WAN ip? I'm using Mace's DDClient docker to update namecheap with my IP address. I've already done point 1. As for 2, I haven't set up ddclient yet. I manually entered my WAN IP at namecheap, but I have no clue where it got 192.64.119.73

I can't get this to work at all.. It keeps killing itself. The most useful thing I see in the docker log is "Detail: Failed to connect to 192.64.119.73:443 for TLS-SNI-01 challenge" It's a domain I purchased tonight from namecheap. I have created "A + Dynamic DNS" record at namecheap pointing to my public ip address. My router is forwarding 80 and 443 to 88 and 443 as defined in the docker template. I'm just at a loss.. Has anyone else seen this error and knows how to fix it?

I started seeing the same message so I closed the port

I've had issues with accessing unRAID webui if I didn't use the --cpuset-cpus attribute to limit the cores my Plex container uses. Have you tried setting it to use all but one or two cores?

In a manner of speaking.. Althub blamed Sonarr or my settings, Sonarr seemed to expect me to set up additional software to see what was going on. Both said I was the only one reporting an issue. No one wanted to own the issue, so I had to find a new indexer. New indexer behaves as you would expect. I still believe the issue to be with althub, at least in my case.

In my case, althub test passes, but every nzb added via api results in the following: Message Request Failed: Failed to add nzb Ballers.2015.S02E05.720p.HDTV.x264.nzb Exception NzbDrone.Core.Download.Clients.DownloadClientException: Failed to add nzb Ballers.2015.S02E05.720p.HDTV.x264.nzb at NzbDrone.Core.Download.Clients.Nzbget.Nzbget.AddFromNzbFile (NzbDrone.Core.Parser.Model.RemoteEpisode remoteEpisode, System.String filename, System.Byte[] fileContent) <0x41840c60 + 0x0026f> in <filename unknown>:0 at NzbDrone.Core.Download.UsenetClientBase`1[TSettings].Download (NzbDrone.Core.Parser.Model.RemoteEpisode remoteEpisode) <0x417a7300 + 0x00525> in <filename unknown>:0 at NzbDrone.Core.Download.DownloadService.DownloadReport (NzbDrone.Core.Parser.Model.RemoteEpisode remoteEpisode) <0x417a6780 + 0x00561> in <filename unknown>:0 at NzbDrone.Api.Indexers.ReleaseModule.DownloadRelease (NzbDrone.Api.Indexers.ReleaseResource release) <0x417a65c0 + 0x000c1> in <filename unknown>:0 at NzbDrone.Api.Indexers.ReleaseModule.<.ctor>b__7_0 (System.Object x) <0x4179eb30 + 0x0002b> in <filename unknown>:0 at (wrapper dynamic-method) System.Object:CallSite.Target (System.Runtime.CompilerServices.Closure,System.Runtime.CompilerServices.CallSite,System.Func`2<object, object>,object) at Nancy.Routing.Route+<>c__DisplayClass4.<Wrap>b__3 (System.Object parameters, CancellationToken context) <0x416b0310 + 0x0014f> in <filename unknown>:0 from Sonarr, and NZBGet gives me ERROR Sun Aug 21 2016 10:03:13 Could not add collection Ballers.2015.S02E05.720p.HDTV.x264.nzb to queue ERROR Sun Aug 21 2016 10:03:13 Error parsing nzb-file Ballers.2015.S02E05.720p.HDTV.x264.nzb ERROR Sun Aug 21 2016 10:03:13 Error parsing nzb-file: Premature end of data in tag html line 1 ERROR Sun Aug 21 2016 10:03:13 Error parsing nzb-file: Opening and ending tag mismatch: body line 3 and html ERROR Sun Aug 21 2016 10:03:13 Error parsing nzb-file: Opening and ending tag mismatch: hr line 5 and body

Is anyone using this docker also using althub as an indexer? Sometime within the last week I started getting errors for any nzb added from althub either via rss sync or manual search, either through web UI or the Android app NZB360. I don't believe the docker is to blame as I'm receiving NZBs from other indexers, but the team at althub says everything is fine on their end. I even tried deleting the docker and image, redownloading and having it build a fresh config and scan everything back in with the same results. I'm hoping to either find others having the same issue or someone with a specific idea of what setting in my config might be wrong since they all look fine to me

Updated first post and hoping one of the Docker gurus here can take the time to give it a go.

I believe the card is fully seated, unfortunately I discovered this after leaving the house for a 14 hour shift so I've been accessing the interface to perform reboots via proxy from my phone. When I get home I can attempt to confirm

When it's running, it's fine. If there's a power outage or some little fingers find the power button, it's hit or miss if unRAID finds any HDDs when the system comes back up and a series of reboots, crossing of fingers and blood sacrifices are needed before everything shows up and I can start the array. I'm hoping there's someone out there with a similar system that can help me figure out if this is a compatibility issue or a defective card/mobo or something else entirely?

I tried changing some settings and nzbget wouldn't come back up. I just get Thu Apr 28 02:25:54 2016 INFO nzbget 16.4 daemon-mode Thu Apr 28 02:25:56 2016 INFO nzbget 16.4 daemon-mode Thu Apr 28 02:25:58 2016 INFO nzbget 16.4 daemon-mode Thu Apr 28 02:26:00 2016 INFO nzbget 16.4 daemon-mode Thu Apr 28 02:25:43 2016 INFO nzbget 16.4 daemon-mode Thu Apr 28 02:25:46 2016 INFO nzbget 16.4 daemon-mode Thu Apr 28 02:25:48 2016 INFO nzbget 16.4 daemon-mode Thu Apr 28 02:25:50 2016 INFO nzbget 16.4 daemon-mode Into infinity. I've tried renaming the config file, renaming the folder, restarting the image, stopping and starting the image, deleting and re-downloading the image. All yield the same result. Any ideas?

I am aware of that, yes. And it's great for converting a few files, but not whole collections. While it doesn't specify, it needs both 8bit and 10bit handbrake builds. If it hits a video for which it doesn't have an appropriate build, it throws an error and stops. When I've tried calling the script from the existing dockers, it complains about ffmpeg being absent. It would also be nice to have the "optional" dependencies for people that might want their features too. I had been running it on a separate ubuntu system, but it would be nice to consolidate.

https://github.com/FallingSnow/h265ize Is there anyone willing and able to make a container for the script and it's dependencies? Update: new versions no longer use handbrake and require ffmpeg and node.js. Can anyone take this on? If I need to feed the ~30k files through handbrake manually I'll be spending all my time doing that! If I knew more about docker creation I'd take a stab at it myself but I've got too much other stuff on my plate right now to start a new side project. It'd probably take me longer to get down the basics than for one of the gurus here to pop it in a template anyway.

Well, it looks like my Windows 7 desktop sees it, but I couldn't find where it tells me what firmware is installed.. Guess it's not compatible with the mobo for some reason? Update: seems to be recognized now after flashing mobo BIOS. In case anyone else has an issue and searches, M1015 will work with Supermicro X8DTE-F after flashing the motherboard BIOS to v2.0c (mine was 2.0a)

I can try it in an old desktop later.. Right now I have a 2 year old running amok. The seller is saying it might be my motherboard that's the problem. I know I've seen people here using supermicro hardware.. Anyone with an X8DTE-F mobo and a M1015 working together?

I could be missing it, but I don't see it. I see the Adaptec card so I would assume it would show up immediately before or after that

Ok, I see a single green led blinking steadily on the M1015 and Option ROM is enabled on all slots. Nothing about the M1015 shows up during POST. I have the Adaptec card in too and it shows up during post

No, nothing during power up about the M1015. The backplane has 2 mini-sas ports like the card so I got SFF-8087 to SFF-8087 cables. I don't believe there's a forward/reverse distinction with those