IllMethods

is there a way to make the fan speed go up in increments of 10 until the cpu temp drops back down again? say cpu temp hits 50, it goes up to 30 from 20, it doesn't go back below 50 in that minute to it goes up another 10, it drops below 50 so it drops down 10, it stays below 50 for another minute so it drops down another 10?

Thankyou for the hard work, I have been using this for a while. Just wondering if this would be easy enough to do. Could you make an option to ignore hardlinks? Reason being is for seeding torrents. I would prefer those to stay on Pool until they are no longer seeding. This way I can keep only my 7 drive zfs pool spun up, and the array drives will only spin up if a file is actually being used. I'd like my pool drives to be powered down unless something is actually being read.

This is happening to me right now, but when something transcodes, I see that plex is still using the gpu with the GPU Statistics plugin. Gpu in question is an rtx 4000 ada sff

I am having the same issue. It slowly eats up all my ram then crashes the dock. 384Gb ram total. This sucks because this actually works really well in plex, emby and jellyfin until this happens. Does anyone have a solution or suggestion?

Hello Could we get the option to mirror a share to the array, but read from the pool? This would be a good option for the appdata, for those of us who are risky and run raid0 for speed. Option to mirror the pool data or array when the mover runs. This way if the pool dies, app data is still complete on the array.

I think I've figured it out. It had nothing to do with the hardware in it, but the smart power monitor that the ups was plugged into. Internet drops, faulty power monitor caused a power spike which made the netapp reboot. Seems to be what was happening anyway, could be wrong, but I caught the adaptor last night having a seizure and passing it onto the netapp... Removed it and everything went back to normal.

Hello I was wondering how we can get docks that aren't in the community plugins installed? Threadfin isn't in there but it is a much better version of xteve and is still in active development. It also allows to backup streams for channels just incase one goes down which I think is a really good feature plus actually buffers to ram instead of files. Any help would be appreciated.

For anyone that ends up getting this issue, I had found out I had a corrupt file system on one of my drives. I had to start the array in maintenance mode, go to the drive with the error and go to the Check Filesystem Status. Change the -n to -v or just delete it and let it run.

Ok, that job finished. Didn't fix it. Locations tab still shows that it knows where all the files are, but it still will not show them. Plex can still see the latest season and actually play them for some reason, Sonarr still can see everything, nothing has gone missing with a rescan, but the file managers can not. Plex can not see any season but the last. Said show has 21 seasons.

It is my media share. I've tried creating a test folder in it which shows no issue making but it still does not show. Very strange. No, I will try that now. Plex has decided it will see the latest season of the show now, but the rest still are not visable but nothing is visable in the file manager both on windows smb or within unraid

I have one specific folder of which its contents does not show from within the share. Funny thing is, Sonarr can see it all. Plex can not. Within unraid file manager, if in the share version, it will also not see it, but if I go into each individual drive which the share says it has contents on, I can see them. Any Ideas? illmethods-diagnostics-20230716-1503.zip

Will do. It is only the second HBA which is affected by this, so I'm going to try getting an expander card and run it all from the one HBA. I'm just not sure about what cables I'll need now if I do this so it may take a while. I'm thinking of going with this one, https://www.ebay.com/itm/185002503624?fbclid=IwAR1R2aR-LnLarIdVB3ZVIAqZMm6atBtDm0AFRxPhUINZFFjc3TfPBsgOxK8 Then I'll need to know what cable I need to connect that to my NetApp.

Ok, so I have disabled the onboard nic and installed a 4 port intel nic. I rebooted the router to see if it fixed it. This time, 2 of the drives showed read errors which is a lot better but it doesn't seem like it fixed the issue. All the drives on the second hba which is attached to the NetApp now show under historical devices (which means they were temporarily disconnected?), and all the temps for those drives are not readable. I've attached the diagnostics. Let me know what I should try next. Would that second hba possibly be the issue? I'm considering getting an expander card and running it all from the one hba. illmethods-diagnostics-20230630-1151.zip

What about now? Av1 is now easily done with handbrake, not sure about ffmpeg but I would assume so. It has also been not far off a couple years since you said this. I love your app but I'm currently waiting on something to have a decent Av1 encoder plugin, especially one that uses Intel quick sync. I have a A770 Intel Arc, so I'm wanting to take advantage of its Av1 hardware accelerated encoder. I know a lot of people out there want to take advantage of this, it would be a serious space saver for all of us.

Just to be clear, this has happened on every version of unraid, not just the one it is on. Every version for around just over a year.