1WayJonny

Hi ich777, Thanks for your work and your response. I’ve used many of your servers before, and they’ve always been straightforward and worked as expected. However, I recently tried setting up a Rust Docker on Unraid, and I have to say the experience was pretty confusing and ultimately unsuccessful after multiple attempts. From what I understand, most configuration changes are supposed to go into the GAMES PARAMETERS line, while other common settings are handled in the template. The issue is that configuration data seems to come from multiple sources, and when watching the logs, it becomes even more confusing. Values appear duplicated, and it’s not clear which ones are coming from the template versus the GAMES PARAMETERS line. I’ve never had problems with your other Docker setups, but I spent about three hours on this and eventually gave up. Rust servers take some time to start up, but the issue is that the Docker appears to ignore certain configuration values. The only value I could get going was RCON.PASSWORD. Nothing else worked such as password for the server, name of the server , always in development server mode, welcome message. I’ve tried using only the GAMES PARAMETERS line, a manual config file, and adding variables directly to the template. In my testing, only the GAMES PARAMETERS line seems to have any effect. Even then, there’s confusion around using “-” versus “+” for parameters. Some values aren’t being recognized, and I’ve been told not to mix the two formats. With the duplicated values in the logs and long startup times, this quickly becomes a frustrating experience. At this point, I’m not sure what I’m doing wrong or why the setup behaves this way. Being able to use a manual server.cfg file would be great here but I think you said that was not possible. If so, reading back it seems like quite a few users get caught up with the Rust server. If the games parramters line took the attempts and we didnt see double the values in the log, I think we could have much easier time and clearer picture. I still do not have any of GAMES PARAMETERS line configs working but rcon.password. The rcon.password is set with "****" but the log says rcon.password command not found, batchmode command not found and ignores any thing else, then doubles its. Again thank you so much for what you do but I am 3 hours in and just cant get this to work right. Appricate any help, and I think server.cfg would be welcome with this docker setup. Never had an issue with any other ich777 template, they are damn near perfect! 👍 EDIT https://developer.valvesoftware.com/wiki/Rust_Dedicated_Server#Command_line_parameters Used this link and the example shows “-” versus “+” for parameters too. For example... where can I set the password for the server? Not the RCON but the password to connect to the game server when connecting? As an example, can the server password (not rcon) even be handled by the GAMES PARAMETERS line? EDIT 2 OK I think the server password may need Oxide. I found some post that suggested a command which did not work. Seems like Rust does not support passwords without a mod? Anyhow all the other values are ignored server stuck in development server. Is this why its ignoring other config values? EDIT 3 OK so I went to Windows, used SteamCMD and followed the steps to download. I need to share that many of the confusing things we are seeing from the docker are in fact NOT from the docker and the server software that is released. Mainly the most confusing thing was the double of the config varibles being spit out 2-3 in the logs. Well... that is not from the docker but the software. I can see the docker is doing a really good job and the confusing part is that people do not just know how to set up Rust, its not hard but the logs and the long server boot times makes it painful. That being said it was easier having access to the CFG file and putting many of the settings inside of that then the GAMES PARAMETERS line. I would suggest if you can get that working and leave as little to the template as possible that would be a better expereince as Rust setup is just finicky. For anyone having trouble do a local set up on a PC and compare whats work or whats not, you will get access to the CFG file and you can then apply then knowledge back to the docker setup. Again the main trouble people are having is the double to triple log items. Remember its not the dockers fault. Thanks ICH777 Link to local setup: https://steamcommunity.com/sharedfiles/filedetails/?id=1436222938

You are the best, tested, working as expected. 😎

Hi @ich777, Love the work you do for dockers. Having an issue with the SABnzbd docker at the moment, getting the following errors upon starting the docker. Error: Essential modules are missing, downloading cannot start. Error: ABCTools disabled: no correct version found! (Found v8.1.0, expecting v8.2.0) I am on Unraid 6.12.10 at the moment and the docker is updated. Thanks!

Thank you, this was driving me crazy. I downloaded the files myself and and unpacked them with wget and tar but lots of issues. Did not realize the docker had it located here. This would be helpful if copied in the docker instructions. I looked there multiples times we are page 29 with multiple people asking. Please paste inside the docker setup FTW! 😃 Thanks for the help! Thanks for the docker DJoss!

Just an update to my question. The command is actually coming from the ZFS plugin itself and it ran after a reboot. Once ZFS becomes part of UnRaid that may go away but that is what is issuing the command. The reason I seen it more was because of the restarts I was doing. When first with the test rig I did not have this plug-in installed and was not rebooting at all. I started rebooting more and found this plug at the same time. Thanks for the reply and plug-in work! 😃

@ich777 Hi - thank you much for the information. All good knowing it is the the ZFS plug-in issuing the command. I am new to ZFS & raidz and with 120TB of data I have been learning and watching the zpool history to make sure my migration from Windows RAID5 to UnRaid is working well. When seeing that command I wanted to make sure I did not have plugs doing unwanted things. This is just a learning experience for me and appreciate the explanation. Also, love your docker container work. Ill be sending a donation soon. Awesome job!

Hello, A little new to ZFS and using a 2x raidz2. I learned how to check my zpool history and I seem to have a plugin calling an unwanted command on my pool and I am trying to figure out if its the actual ZFS plugin or something else. The issue is that 2-3 a day (random days, maybe a week apart?) I am seeing a day I am seeing the following: 2022-12-17.11:05:54 zpool import -a 2022-12-17.11:13:01 zpool import -a 2022-12-28.10:24:12 zpool import -a 2022-12-28.10:44:10 zpool import -a 2022-12-28.13:03:49 zpool import -a What also happens its run twice a day but about 5 minutes apart and makes no sense. I have only a few plugins installed ZFS, ZFS Companion and ZFS Master. The author of ZFS Master confirmed it is not his plugin and wanted to check here is the ZFS plugin is calling for the import and maybe why again 5 minutes later? Any help/feedback is very appreciated. This is a great plugin but even though I am new to ZFS that seems like a powerful command to being running on its own and made me nervous to get some answers. Thanks!

@Iker Thanks for the great detailed reply. It will help me figure out what is calling the additional commands. I only have ZFS, ZFS-companion and ZFS-Master and not much else installed besides Plex. I see you find it weird that something has been calling for import more then needed. I have never manually imported anything either is really weird. As for #3 if I am reading correct that is from the ZFS-Master plugin but only when I click the main page? Its a new setup so I have been clicking more often. Summary: No back ground calls are made and only refreshed every 30 second when clicking on the main page and sitting active.

Hi saw the update and applied but it did not auto fix my drive names. I wen to the device and renamed, then deleted any text and hit SAVE. That then saved the right name and repeated for all the incorrect drives and they are not duplicating any more. The update did not automatically do it but maybe prevent it in the future? Thanks for the work and attention. Have a good day.

No worries and thank you. I am busy to and do not have time to manually fix. When I do I will check back for an update or manually fix then. Either way will report back and thanks for the plug-in and quick work.

Hi, Using this plug in and its working well but concerned with what it does to my pools. I am new to zraid and when looking at the history I see some concerning items. This plug-in is running exporting of data twice per hour as a duplicate. Why is running zpool import -a and importing datasets command. I have never asked the plug to import anything. My zpools with the duplicate data exports have a ton of history and commands that I am not sure is necessary. Is there any way to erase this zpool history or has this plug-in runs its course? Not sure why its running twice, all the time. 2022-12-17.10:18:39 zfs program -jn -m 20971520 XXX /usr/local/emhttp/plugins/zfs.master/scripts/zfs_get_pool_data.lua XXX 2022-12-17.10:18:39 zfs program -jn -m 20971520 XXX /usr/local/emhttp/plugins/zfs.master/scripts/zfs_get_pool_data.lua XXX 2022-12-17.11:05:54 zpool import -a 2022-12-17.11:13:01 zpool import -a Why is this importing twice in 10 min? I have never run the import command at all.

Attached with the unassigned devices plug installed. Let me know if you need anything else. Thank you! diagnostics-20221222-1240.zip

Hello, Moved over from a Windows server with RAID5 60 TB to Unraid raidz2 120TB with two pools. Everything has went well. I am now having an issue with the unassigned devices plugin and the device names being mixed up. At first all device names were good in the list. I have 6 drives on my new LSI HBA and 6 drives on my Adaptec 71605 (RAID5). The plugin worked well but I had issues after I retired the RAID5. Unplugged my Adaptec raid card, then moved the clear drives from the RAID5 to the HBA as a new pool. That went well too, but when I did that the device names "i.e. dev6" is wrong or replicated and I took a screenshot. After unistalling the unraid listed them in order but when I reinstall the unassigned devices plug-in the names get mixed up again. The names will not match the actually device names for maybe about 3-4 drives. When reinstalling the plug I can see the passthrough and other setting have stuck around. Maybe there is a way to clear the unassigned devices plugin history settings? Please see attached screen shot. I have tried to rename the device to the right number and save but that doesnt work. I hope this would not cause a an issue with an accidental format on the wrong drive but glad I notcied before I clear the the drives from the RAID. I could not trust the visual format and cleared the drives by command line and all is well. No issues but wanted to report it and see what I can do about clearing the history/settings? DEV 1 and 6 and the main issues. Top DEV1 is really 11 and bottom DEV1 is the real DEV1.