Querzion
Members
-
Joined
-
Last visited
Everything posted by Querzion
-
As I named the post. . . My computer just started making buzzing noises when I use the scroll. I use unRAID 7 beta 2, and my VM that I mainly use, just rebooted and afterwards the bluetooth device was disconnected which was an easy fix, since I have an extra mouse connected to the system in case something happens. When I reconnected the USB-BT device, my mouse went on a hyperdrive, and was 2-3 times faster then it’s set to be. After the reboot I started to notice new sounds from the computer that I have never heard before. "/ Buzzing as soon as I scroll on a webpage. Haven’t started up a game yet in order to check if something is wrong. The only thing new that I changed recently was the setting of my RX 6700 XT, to use Super Resolution in the AMD Experience Suite. I can’t localize where the sounds come from though. It was while trying to do that, that my USB-BT device just disconnected from unRAID. "/ So I don’t know if it’s the m.2, MB, GPU, CPU or PSU that’s making sounds. "/ Issues occur when I scroll, and also seems to make sounds when it's under load. ex. loading a webpage. I set it to urgent, because I don't know if it's the VM breaking down or if it's uR-7b2 that is causing this.
-
I took some of my time, spending it for something good, but I have no Idea how pull-requests etc. actually work on GitHub, I rarely fork anything, and when I do, I usually don't bother with making any changes to it. But I tested it out now and well. . . I made 15-16 pull-requests in order to update some of the Swedish language files, so that people who are from Sweden, such as I, can change the language and it's accurate. 3443 ROWs of changes later. . . I'm not sure how the process will go by here, so I thought if I turned to the "General Support"-thread, I could maybe get an answer to that.
-
Kan vet jag inte, jag bara gjorde. ;P Vet dock inte hur det går till efter alla pull-requests skapats. Och när jag väl översatt det till svenska så kan jag väl lika gärna hoppa över till Svenska översättningen istället för att köra det på engelska, men mest för att kolla om översättningarna stämmer bra överens med WebUI:t. Så att det inte är en massa problem längre ner. Använde mig utav ChatGPT för grovgörat till att översätta, det som tog tid var att korrekturläsa allt innan jag skickade iväg det, och ändra bild till avbild 411 miljoner gånger. "/ Lägga till nått s här och där, ändra en till ett etc. Vi får se hur det går helt enkelt.
-
I och med att jag såg den här posten, så fick jag reda på hur lite som gjorts på översättningarna och efter att ha kikat lite på det så beslöt jag mig för att bara börja med att göra en fork på lang-sv_SE, och har spenderat senaste 7 timmarna eller något med att översätta nästan alla begrepp. Har fortfarande users.txt, vms.txt, apps.txt, ca_settings.txt, javascript.ca.txt och filen jag inte ens tänker sätta mig med dvs. helptext.txt. Folk får gott och väl lära sig ordentlig engelska och bara läsa det som står där, för jag orkar då inte översätta närmare 2000 rader med text. Filen är på över 2500 rader, men det är mycket som inte ska översättas och mellanrum vid varje segment skifte, så tänker att det är nog inte mer än 2000 rader att översätta, men ändå. Det är en väldans massa att översätta. Jag har gjort några fulla pull-requests än så länge, och håller på med den tionde i skrivande stund. Det är bra att vara manisk ibland, och att ChatGPT fungerar för att göra en snabb grundläggande översättning, sen behöver man bara sitta och rätta de få småfel som blivit. Håller på med translations.txt 300 rader är färdiga just nu, men dokumentet är på runt 1500 rader. Efter det är det de andra dokumenten kvar dvs. flikarna jag har öppna kvar att göra. Den sammanlagda mängden RADER, jag översatt från engelska till svenska senaste 16-17 timmarna. (Hade en nap-time i några timmar också.) Är inte så insatt med GitHub egentligen, så jag förstår mig dock inte på pull-requests och pushes ordentligt. Jag vet att om det lyckats, så mergas det.
-
It only shows one row and a slider for the endlessly long row of limited icons. . . Really, shouldn't it be like 6 x 3 or 4 icons showing?
-
Okay, so lets start of with this. When I started using unRAID, I wasn't really that interested in temperatures, never really have been, BUT, I'm on new hardware and since I bought the biggest All in One cooler I could find, I'm probably not having any CPU temp failures. unRAID was unable to give out sensor data in 6.10, 6.11, 6.12, and now also in 7b2. So I'm not too sure what's going on here. Also! If I start CPU-Z or try to get the sensor data from HardWare Info, my VM reboots. That was a new experience. The first picture is from the terminal of unRAID it gives out the sensory data from the psu, which is nice, and one of the m.2 NVMe's i figure and the third is either the GPU, or the second m.2, the second picture is the AMD Experience Suite, and it has no problem giving out any sensory data regarding the dGPU, not strange at all since it's passed through to the VM. The third picture is of HardWare Info. . . . What is HVCI? The fourth picture is of GPU-Z, and it's just more data on the dGPU, the fifth & sixth pictures are also from unRAID . . . so that's about it. The BIOS/UEFI gives out the CPU and Motherboard temperature data without a hitch, but it's never received by unRAID. root@VMC:~# sensors corsairpsu-hid-3-8 Adapter: HID adapter v_in: 230.00 V v_out +12v: 12.00 V (crit min = +8.41 V, crit max = +15.59 V) v_out +5v: 5.08 V (crit min = +3.50 V, crit max = +6.50 V) v_out +3.3v: 3.36 V (crit min = +2.31 V, crit max = +4.30 V) psu fan: 0 RPM vrm temp: +45.5°C (crit = +70.0°C) case temp: +46.2°C (crit = +70.0°C) power total: 208.00 W power +12v: 168.00 W power +5v: 22.00 W power +3.3v: 10.00 W curr +12v: 13.25 A (crit max = +112.50 A) curr +5v: 4.44 A (crit max = +40.00 A) curr +3.3v: 3.06 A (crit max = +40.00 A) nvme-pci-6500 Adapter: PCI adapter Composite: +31.9°C (low = -273.1°C, high = +69.8°C) (crit = +79.8°C) Sensor 1: +31.9°C (low = -273.1°C, high = +65261.8°C) Sensor 2: +32.9°C (low = -273.1°C, high = +65261.8°C) Sensor 5: +48.9°C (low = -273.1°C, high = +65261.8°C) k10temp-pci-00c3 Adapter: PCI adapter Tctl: +52.1°C Tccd1: +53.8°C Tccd2: +43.4°C root@VMC:~# sensors-detect # sensors-detect version 3.6.0 # Board: ASUSTeK COMPUTER INC. PRIME X670-P WIFI # Kernel: 6.8.12-Unraid x86_64 # Processor: AMD Ryzen 9 7900X 12-Core Processor (25/97/2) This program will help you determine which kernel modules you need to load to use lm_sensors most effectively. It is generally safe and recommended to accept the default answers to all questions, unless you know what you're doing. Some south bridges, CPUs or memory controllers contain embedded sensors. Do you want to scan for them? This is totally safe. (YES/no): Silicon Integrated Systems SIS5595... No VIA VT82C686 Integrated Sensors... No VIA VT8231 Integrated Sensors... No AMD K8 thermal sensors... No AMD Family 10h thermal sensors... No AMD Family 11h thermal sensors... No AMD Family 12h and 14h thermal sensors... No AMD Family 15h thermal sensors... No AMD Family 16h thermal sensors... No AMD Family 17h thermal sensors... No AMD Family 15h power sensors... No AMD Family 16h power sensors... No Hygon Family 18h thermal sensors... No Intel digital thermal sensor... No Intel AMB FB-DIMM thermal sensor... No Intel 5500/5520/X58 thermal sensor... No VIA C7 thermal sensor... No VIA Nano thermal sensor... No Some Super I/O chips contain embedded sensors. We have to write to standard I/O ports to probe them. This is usually safe. Do you want to scan for Super I/O sensors? (YES/no): Probing for Super-I/O at 0x2e/0x2f Trying family `National Semiconductor/ITE'... No Trying family `SMSC'... No Trying family `VIA/Winbond/Nuvoton/Fintek'... Yes Found unknown chip with ID 0xd802 (logical device B has address 0x290, could be sensors) Probing for Super-I/O at 0x4e/0x4f Trying family `National Semiconductor/ITE'... No Trying family `SMSC'... No Trying family `VIA/Winbond/Nuvoton/Fintek'... No Trying family `ITE'... No Some systems (mainly servers) implement IPMI, a set of common interfaces through which system health data may be retrieved, amongst other things. We first try to get the information from SMBIOS. If we don't find it there, we have to read from arbitrary I/O ports to probe for such interfaces. This is normally safe. Do you want to scan for IPMI interfaces? (YES/no): Probing for `IPMI BMC KCS' at 0xca0... No Probing for `IPMI BMC SMIC' at 0xca8... No Some hardware monitoring chips are accessible through the ISA I/O ports. We have to write to arbitrary I/O ports to probe them. This is usually safe though. Yes, you do have ISA I/O ports even if you do not have any ISA slots! Do you want to scan the ISA I/O ports? (YES/no): Probing for `National Semiconductor LM78' at 0x290... No Probing for `National Semiconductor LM79' at 0x290... No Probing for `Winbond W83781D' at 0x290... No Probing for `Winbond W83782D' at 0x290... No Lastly, we can probe the I2C/SMBus adapters for connected hardware monitoring devices. This is the most risky part, and while it works reasonably well on most systems, it has been reported to cause trouble on some systems. Do you want to probe the I2C/SMBus adapters now? (YES/no): Using driver `i2c-piix4' for device 0000:00:14.0: AMD KERNCZ SMBus Next adapter: SMBus PIIX4 adapter port 0 at 0b00 (i2c-0) Do you want to scan it? (YES/no/selectively): Client found at address 0x28 Probing for `National Semiconductor LM78'... No Probing for `National Semiconductor LM79'... No Probing for `National Semiconductor LM80'... No Probing for `National Semiconductor LM96080'... No Probing for `Winbond W83781D'... No Probing for `Winbond W83782D'... No Probing for `Nuvoton NCT7802Y'... No Probing for `Winbond W83627HF'... No Probing for `Winbond W83627EHF'... No Probing for `Winbond W83627DHG/W83667HG/W83677HG'... No Probing for `Asus AS99127F (rev.1)'... No Probing for `Asus AS99127F (rev.2)'... No Probing for `Asus ASB100 Bach'... No Probing for `Analog Devices ADM1029'... No Probing for `ITE IT8712F'... No Client found at address 0x49 Probing for `National Semiconductor LM75'... No Probing for `National Semiconductor LM75A'... No Probing for `Dallas Semiconductor DS75'... No Probing for `National Semiconductor LM77'... No Probing for `Analog Devices ADT7410/ADT7420'... No Probing for `Maxim MAX6642'... No Probing for `Texas Instruments TMP435'... No Probing for `National Semiconductor LM73'... No Probing for `National Semiconductor LM92'... No Probing for `National Semiconductor LM76'... No Probing for `Maxim MAX6633/MAX6634/MAX6635'... No Probing for `NXP/Philips SA56004'... No Probing for `SMSC EMC1023'... No Probing for `SMSC EMC1043'... No Probing for `SMSC EMC1053'... No Probing for `SMSC EMC1063'... No Client found at address 0x4b Probing for `National Semiconductor LM75'... No Probing for `National Semiconductor LM75A'... No Probing for `Dallas Semiconductor DS75'... No Probing for `National Semiconductor LM77'... No Probing for `Analog Devices ADT7410/ADT7420'... No Probing for `Analog Devices ADT7411'... No Probing for `Maxim MAX6642'... No Probing for `Texas Instruments TMP435'... No Probing for `National Semiconductor LM92'... No Probing for `National Semiconductor LM76'... No Probing for `Maxim MAX6633/MAX6634/MAX6635'... No Probing for `NXP/Philips SA56004'... No Probing for `Analog Devices ADT7481'... No Client found at address 0x51 Probing for `Analog Devices ADM1033'... No Probing for `Analog Devices ADM1034'... No Probing for `SPD EEPROM'... No Client found at address 0x53 Probing for `Analog Devices ADM1033'... No Probing for `Analog Devices ADM1034'... No Probing for `SPD EEPROM'... No Next adapter: SMBus PIIX4 adapter port 2 at 0b00 (i2c-1) Do you want to scan it? (YES/no/selectively): Next adapter: SMBus PIIX4 adapter port 1 at 0b20 (i2c-2) Do you want to scan it? (YES/no/selectively): Sorry, no sensors were detected. Either your system has no sensors, or they are not supported, or they are connected to an I2C or SMBus adapter that is not supported. If you find out what chips are on your board, check https://hwmon.wiki.kernel.org/device_support_status for driver status. BTW?! Will I be able to use Resizable BAR and get the VM running now?
-
I can't state that this would actually be a good thing though. Since if it becomes broader it's going to be more difficult to maintain. If it's one specific distro, then it's a greater chance for fewer problems and having it on a debian/ubuntu base would really advance unRAID as a whole. If there are problems, then there's not only unRAID support to lean on, but also an extensive forum with active users to help if a problem occur such as it is with ubuntu. I would prefer cannonical as a base, if not, they could always make a nixos or arch based version. haha All them crashes belong to us. ;P
-
Why not just use the logical CPUs feature for that? cpu 0-11 is the physical cores and 12-23 is the threads. At least on my CPU, and I'm pretty sure that it's paired up based on the CPU schematics. Or did I not comprehend you properly?
-
More Icons out of the box, or a way to upload images that act as icons, that gets added to the list automagically, or is there already a way to expand on the icons other then with the "vm_custom_icons" docker? Oh Is there a way to make the Icon's box work as it should? It's big enough to house three or four rows, but only one shows up and it has all icons on a line.
-
I uninstalled the plugin.
-
So what Am I to do about this? Just skip it and hope for the best?
-
And Now I'm here. . .
-
That should be enough for context.
-
Hur ser det ut med den Svenska översättningen? Inte för att jag behöver byta, trivs bäst med engelska.
