MvL

I suppose this is also applies for the LSI 9201-8i?

Hi, thanks for the prompt reply!

Does the LSI SAS9201-16i support 8, 10 and 12 Tb drives?

I also tried all kinds of NAS software, and eventually came back to unRAID. unRAID is really nice, and Docker is awesome. At the moment I'm running a seconde unRAID server. I'm considering to buy a second license. I have to try Nextcloud.., I'm looking for a self hosted cloud service. Thanks for linking to the guide.

Found the following in the documentation. https://wiki.lime-technology.com/UnRAID_6_2/Storage_Management#Removing_disks

Hi, What is the procedure to remove a drive and pop in a new drive? The current drive gives me IO errors, and I'm pretty sure it also did this in a other bay.

Hi Jonathan, That was a great suggestion. It solved the problem! Never tough about doing this with the offending series. I did go to the series editor, and selected the root tv folder for all series, but that didn't helped. I still have a problem with permission I'll see the error in the screenshot. I'm not sure if it is possible to set permission, and if it is necessary cause if I'm correct it's already 0777. I also see this behaviour with headphones.

Hi, I have a bit of a weird situation. Sonarr is complaining about a missing root folder, but if I check by entering the sonarr container there is no problem. If I go into the "tv" folder I see all of my tv shows. This tv show folder is mounted with unassigned devices. The only differences I see is that the owner is "root:root" and not "abc:users" which is the case with the "downloads" folder. Any idea?

Hi Squid, I solved the problem! When searching I'll find out that some episodes did get imported. Episodes begin with A --> M was no problem, but episodes beginning with N --> Z did not get imported, and gave the message disk full. The problem was I only selected disk1, disk2, disk3 in the disk included checkbox. So I also selected disk4 and disk5 and problem solved!!!

It's getting late, but I will do this tomorrow evening when I come home from work. If you have some to assist tomorrow then I will be grateful. Thank you for the fast reply's.

Thank you for your help. I experimented a bit tonight. I installed sonarr on the same server as sabnzbd and I installed sonarr on the other server. When I installed sonarr on the same server as sabnzbd I mounted the tv series directory. When I installed sonarr on the other server I mounted the downloads directory. I used the unassigned drives plugin as suggested. Cool plugin btw. I did not set a remote path with Sonarr. With both options I receive the message below (see screenshot). Not sure how to solve this.

Hi CHBMB, sorry for the late reply. The reason I've changed my setup. I have now 2 unRAID server so SABnzbd is running on a different server as Sonarr. Some screenshots below. So I think in this situation I must use the remote path in Sonarr, but I'm not sure how I have to set this...

Hi CHBMB, Thank you for the reply. I already tried that, and I'm not sure why it isn't working. I changed it back to (see screenshot).

Hi, I have some trouble with the mapping, and I'm not sure why.. I've made some screenshots to clarify.

Is it possible in the future to make btrfs storage pool besides a unRAID storage pool?

Thanks for the quick reply and the suggestion! I'm going to check this out.

I have several hdd with tv-shows and I noticed that a tv show is on several hdd's. Is it possible (with a tool) to do a sort of a balance that tv-shows are ordered. So for example Lost on hdd1, Battlestar Galatica on hdd2.

Oh I didn't know. Thank you for clarifying. I will checkout the dynamic autofan plugin!

I was searching the forums to lower my fan speed of my case. It's a bit loud at the moment. I came across this plugin and it's look really interesting. I have a Supermicro X11SSM-F-O mobo. I installed the plugin only I can't enable fancontrol. root@Tower:/# ipmi-sensors ID | Name | Type | Reading | Units | Event 4 | CPU Temp | Temperature | 22.00 | C | 'OK' 71 | PCH Temp | Temperature | 25.00 | C | 'OK' 138 | System Temp | Temperature | 23.00 | C | 'OK' 205 | Peripheral Temp | Temperature | 27.00 | C | 'OK' 272 | VcpuVRM Temp | Temperature | 30.00 | C | 'OK' 339 | DIMMA1 Temp | Temperature | N/A | C | N/A 406 | DIMMA2 Temp | Temperature | 26.00 | C | 'OK' 473 | DIMMB1 Temp | Temperature | N/A | C | N/A 540 | DIMMB2 Temp | Temperature | 26.00 | C | 'OK' 607 | FAN1 | Fan | 1000.00 | RPM | 'OK' 674 | FAN2 | Fan | 2300.00 | RPM | 'OK' 741 | FAN3 | Fan | 2500.00 | RPM | 'OK' 808 | FAN4 | Fan | N/A | RPM | N/A 875 | FANA | Fan | 2600.00 | RPM | 'OK' 942 | 12V | Voltage | 12.32 | V | 'OK' 1009 | 5VCC | Voltage | 5.08 | V | 'OK' 1076 | 3.3VCC | Voltage | 3.40 | V | 'OK' 1143 | VBAT | Voltage | 3.08 | V | 'OK' 1210 | VCPU | Voltage | 0.74 | V | 'OK' 1277 | VDIMMAB | Voltage | 1.20 | V | 'OK' 1344 | 5VSB | Voltage | 5.00 | V | 'OK' 1411 | 3.3VSB | Voltage | 3.27 | V | 'OK' 1478 | VBMC 1.2V | Voltage | 1.22 | V | 'OK' 1545 | VPCH 1.0V | Voltage | 1.02 | V | 'OK' 1612 | Chassis Intru | Physical Security | N/A | N/A | 'General Chassis Intrusion' root@Tower:/# sensors acpitz-virtual-0 Adapter: Virtual device temp1: +27.8°C (crit = +119.0°C) temp2: +29.8°C (crit = +119.0°C) coretemp-isa-0000 Adapter: ISA adapter Physical id 0: +23.0°C (high = +80.0°C, crit = +100.0°C) Core 0: +22.0°C (high = +80.0°C, crit = +100.0°C) Core 1: +22.0°C (high = +80.0°C, crit = +100.0°C) Core 2: +23.0°C (high = +80.0°C, crit = +100.0°C) Core 3: +22.0°C (high = +80.0°C, crit = +100.0°C) root@Tower:/# /usr/sbin/ipmi-sensors --output-sensor-thresholds --comma-separated-output --output-sensor-state --ignore-not-available-sensors --non-abbreviated-units ID,Name,Type,State,Reading,Units,Lower NR,Lower C,Lower NC,Upper NC,Upper C,Upper NR,Event 4,CPU Temp,Temperature,Nominal,22.00,degrees C,0.00,0.00,0.00,95.00,100.00,100.00,'OK' 71,PCH Temp,Temperature,Nominal,25.00,degrees C,-11.00,-8.00,-5.00,90.00,95.00,100.00,'OK' 138,System Temp,Temperature,Nominal,23.00,degrees C,-9.00,-7.00,-5.00,80.00,85.00,90.00,'OK' 205,Peripheral Temp,Temperature,Nominal,27.00,degrees C,-13.00,-11.00,-9.00,76.00,81.00,86.00,'OK' 272,VcpuVRM Temp,Temperature,Nominal,30.00,degrees C,-9.00,-7.00,-5.00,95.00,100.00,105.00,'OK' 406,DIMMA2 Temp,Temperature,Nominal,26.00,degrees C,1.00,2.00,4.00,80.00,85.00,90.00,'OK' 540,DIMMB2 Temp,Temperature,Nominal,26.00,degrees C,1.00,2.00,4.00,80.00,85.00,90.00,'OK' 607,FAN1,Fan,Nominal,1000.00,RPM,300.00,500.00,700.00,25300.00,25400.00,25500.00,'OK' 674,FAN2,Fan,Nominal,2300.00,RPM,300.00,500.00,700.00,25300.00,25400.00,25500.00,'OK' 741,FAN3,Fan,Nominal,2500.00,RPM,300.00,500.00,700.00,25300.00,25400.00,25500.00,'OK' 875,FANA,Fan,Nominal,2500.00,RPM,300.00,500.00,700.00,25300.00,25400.00,25500.00,'OK' 942,12V,Voltage,Nominal,12.32,Volts,10.14,10.27,10.78,12.96,13.28,13.41,'OK' 1009,5VCC,Voltage,Nominal,5.08,Volts,4.25,4.30,4.48,5.39,5.55,5.60,'OK' 1076,3.3VCC,Voltage,Nominal,3.40,Volts,2.79,2.82,2.96,3.55,3.66,3.69,'OK' 1143,VBAT,Voltage,Nominal,3.08,Volts,2.38,2.50,2.58,3.48,3.59,3.67,'OK' 1210,VCPU,Voltage,Nominal,0.74,Volts,0.08,0.08,0.08,1.52,1.52,1.52,'OK' 1277,VDIMMAB,Voltage,Nominal,1.21,Volts,0.95,0.97,1.05,1.34,1.43,1.44,'OK' 1344,5VSB,Voltage,Nominal,5.00,Volts,4.25,4.38,4.48,5.39,5.55,5.60,'OK' 1411,3.3VSB,Voltage,Nominal,3.27,Volts,2.79,2.89,2.96,3.55,3.66,3.69,'OK' 1478,VBMC 1.2V,Voltage,Nominal,1.22,Volts,1.02,1.05,1.09,1.34,1.37,1.40,'OK' 1545,VPCH 1.0V,Voltage,Nominal,1.02,Volts,0.87,0.89,0.92,1.04,1.05,1.07,'OK' 1612,Chassis Intru,Physical Security,Critical,N/A,N/A,N/A,N/A,N/A,N/A,N/A,N/A,'General Chassis Intrusion' Please some help.

Yeah I indeed did. Thanks for the help Squid!

Yeah your indeed right. If you set your ip adres to static there is some trouble with dns. If I set the DNS to 192.168.10.1 that is the adres of my router Docker is not working. If I add the google DNS server to the network settings it's working but slow. If everything is set to automatic (DHCP) it's working okay.

Docker is throwing me this error: Not sure if this is related to this rc1 but I have no problem accessing the Internet from other machines.

The directories that unRAID creates on the cache drive.

How do I recreate the standard directories. I removed the isos directory cause I had a similar directory. I've read that it's a standard directory like system and domains.

Very nice that the minor error of alignment on Safari is fixed. Thanks!