ijuarez

I have manage to get SF web server install and on port 8090, got phpvirtualbox extracted to my root /www and configure the config.php and i thought i hit jack pot when the phpvirtualbox login pop up ( i left the login as admin admin) but i get the error "looks like there is no xml document" i;ve read the manuals but can seem to figure out why i get this. I will attach screen shots

Apple Airport Xtreme. Same here, i have that same problem. i just edited the host file on the computer that i uses to connect to.

what kind of router are you running

Just to make sure that i wasn't crazy , I downloaded VLC using wget and it worked flawlessly.. If anyone else is reading this and has had a similar issue please share.

I get no slowness or errors except the not found file error when trying to open web server config. Not a speed issue tested wget and its working great. Just like you jim its a package not found error. But did you copy and paste the web address how it downloaded the package?

Yes that is correct, the parity drive needs to be at least the size of the largest data drive and you can add new disks one or more at a time. You can use unRAID as a network attached storage and use your current PMS. In this case you would point your libraries to something like \\tower\movies etc. However you can also run the PMS inside unRAID which is officially supported by Plex. You can even try it out and have two PMS in your network which will both be automatically seen by the clients. PMS running on top of unRAID has some limitations related to the video channels, none of the Windows based (Silverlight) channels will work when ran in unRAID. I would recommend putting the PMS on the unRAID, this will free your htpc to be just a client and you will have only one centralised server. unRAID requires basically no maintenance so it will always be available to all your clients. You need to migrate your data to the unRAID system, unRAID cannot protect any external sources. You can do this one disk at a time which will minimise the need for extra disks for the migration. Transcoding is always performed by the PMS. Henris beat me to it but i second his reply.

bump, I also have this issue. JimL copy the link of the DL to the browser, copy to your boot/packages on usb and rerun and see it goes thru it i stops again look at what file package its referencing. See my reply.

Thank you so much. Problem resolved! Ive tried and tried, and still get the error while loading the shared libraries libssl.so anything else could it be, it is still the current file listed on slackware and checksum is correct. you could try manually downloading libmcrypt-2.5.8-i486-1.txz and placing it into /boot/packages on your flash drive, the plg should then recognise that it is there and move to the next package. http://slackware.cs.utah.edu/pub/slackware/slackware-14.0/slackware/l/libmcrypt-2.5.8-i486-1.txz copy and paste that link (shown in your txt log file) and save to packages on your flash drive, then installplg again and see if it moves past. Thanks for the help but i realize that i may have a different problem with wget, i place that file and it got pass that then it got hung up on the next file. DL that one from browser placed it in the /boot/packages that ran ok and it stopped again on the next file. I did this for at least three other packages and then i quit because i was aggravated. the only thing i notice is that when i copy the web address from terminal to chrome it took about 10 sec to prompt the download location. This shouldn't cause it to fail, in my opinion. Any advice would be appreciated.

Thank you so much. Problem resolved! Ive tried and tried, and still get the error while loading the shared libraries libssl.so anything else could it be, stillerror.txt

Is this code for Naked pictures! :)

Does anything happen after entering admin / admin? Try entering the following in telnet then see if webserver starts vboxwebsrv -b -H 127.0.0.1 --logfile /dev/null >/dev/null this is what i get see picture

it says 134.99 opp must use code, sorry

and that is accessible from a different system? same network just not the same system?

No one, man this is disappointing.

when this done a picture is a must to see this beast in action

last picture

other screens

Need some help, i forgo the SF install, i dont like to reboot the server alot. I need help with minor tweaks to get phpvirtual to work i feel im really close. Pictures are attached for reference. Background info DL the plg from here install virtual box and downloaded all the updates (running on V5 stable) I DL lighttpd from unmenu installed it and configure it to port 7000, works fine see picture. DL phpvirtualbox from git hub choose the versin 4.3 (which is what i have) extracted it to a folder on my cache drive named (www same folder that lighttpd is configure to use as the web server). renamed config.php and edited a few lines. see picture On vbox i used the ip of the tower and port 7001, which is also in the config.php. See picture When i call the webpage for phpvirtualbox i get prompted for a user name and password. If you notice that on my config.php i un-commented the not auth variable. (side note i do have a password to get to the main unraid webpage, in other words 'root" has a password) So i have tried the username and password in the PHP file no luck, it keep prompting for user/pass. I read the instructions for phpvirtualbox and used "admin' and password "admin" this yielded a blank webpage. Using unraid 'root' login also yielded the same outcome of a blank webpage. So i know i must be close, i just know that i missed a step.

I have V5.0 stable i can install SF but when I add the web server it just craps out, i get no home page. I remove all instances of SF homepage works. that is why i had to use UnMenu's install

I need help with this, not an expert in linux, i have V5.0 stable, I tried to use SF but they do not work correctly. I downloaded lighttp from UnMenu.. Now what? I've read the example from "theone" website but it made no sense to me on how to configre lighttp. How to do you install the phpvirtualbox once lighttp is installed and configured. Thanks for helping noob My end goal is to up a windows 7 64bit to run some vpn functions and other things

Just an update it never worked so i had to removed SF to get back to the web default. Hopefully the guys can get this working.

I have Transmission install on my rig, simplest install ever, i used Infuencer UnPlugged plug ins. worked like a charm https://github.com/Influencer/UNplugged

Need help figuring out how to fix my issue. I have unraid v5 working just fine, I have such plugs ins as CP, SB, SAB, Headphones, Plex Media Server, Plex updater, and Transmission. Recently i install the plug for VBOX following "theone" directions I installed SF and that is where it went to the crapper. I copied the core and the webserver plug in. Rebooted and now when I try to access my frontpage i get a server cannot be found or and oops page. I have tried IE, safari and chrome, clear the cache several times no luck. I can however access unMenu on all three browsers from three different computers. I cannot find anything on my syslog that i can pin point as the issue. I have attached the sys log syslog-2013-10-22.zip

Used the InFluencer plug-in works great on V5

just install it on v5 and it works very nice and clean. I like it