Jump to content

JorgeB

Moderators
 View Profile  See their activity

  • Posts

    67,681

  • Joined

  • Last visited

  • Days Won

    707

 Content Type 

Everything posted by JorgeB

  1. JorgeB
    Yep.
  2. JorgeB
    Enable user shares in Settings -> Global Share Settings
  3. JorgeB
    Looks like a controller problem: Aug 17 11:12:39 Malakai kernel: aacraid: Host bus reset request. SCSI hang ? If available try with a different HBA, ideally an LSI.
  4. JorgeB
    If you changed devices you can do this to reset pool config without losing data: Stop the array, if Docker/VM services are using the cache pool disable them, unassign all cache devices, start array to make Unraid "forget" current cache config, stop array, reassign all cache devices (there can't be an "All existing data on this device will be OVERWRITTEN when array is Started" warning for any cache device), re-enable Docker/VMs if needed, start array.
  5. JorgeB
    If that's correct yes.
  6. JorgeB
    Also note that if you only did one correcting check it's normal it would find the same errors, but next one should find 0.
  7. JorgeB
    Yep, but not just the log, complete diags.
  8. JorgeB
    If you haven't rebooted since last parity check please post diags: Tools -> Diagnostics
  9. JorgeB
    Where's the "Unread" button? There was one on the top right (also on bottom right), both are missing, there's a "Start new topic" in its place.
  10. JorgeB
    Disk dropped offline, looks more like a connection/power problem, but before rebuilding on top start the array to make sure the emulated disk is mounting and contents look correct.
  11. JorgeB
    Settings -> Global Share Settings -> Enable user shares
  12. JorgeB
    Did you change devices or just the order? Pool device order is not a problem, as long all devices are correct.
  13. JorgeB
    Correct, should be fixed now.
  14. JorgeB
    Two drives going down at the same time is usually not a disk problem, the unassigned disk looks healthy, you'd need to connect the other one to check, but probably it's also good.
  15. JorgeB
    Aug 16 18:20:21 NAS kernel: XFS (md2): Unmount and run xfs_repair Check filesystem on disk2: https://wiki.unraid.net/Check_Disk_Filesystems#Checking_and_fixing_drives_in_the_webGui Run it without -n or nothing will be done, and if it asks for it use -L.
  16. JorgeB
    Still not working, looks like a forum problem, try again in a few minutes, you can try to download the attachment to see if it's working.
  17. JorgeB
    Not working, please try again.
  18. JorgeB
    Please post the diagnostics: Tools -> Diagnostics
  19. JorgeB
    If it has the old data you can copy the data to the array, or do a new config assign it to the array and re-sync parity, same for disk7.
  20. JorgeB
    I was asking about the unassigned disk:
  21. JorgeB
    Multiple apps segfaulting, run memtest.
  22. JorgeB
    Reboot
  23. JorgeB
    Enable syslog mirror to flash then post that log after a crash.
  24. JorgeB
    Best bet is to post in the existing support thread of the docker you're using:
  25. JorgeB
    Pool devices are out of sync, there are some recovery options here.
×
×
  • Create New...