Jump to content

JorgeB

Moderators
 View Profile  See their activity

  • Posts

    67,662

  • Joined

  • Last visited

  • Days Won

    707

 Content Type 

Everything posted by JorgeB

  1. JorgeB
    Just noticed that you have a parity check scheduled to run daily, we usually recommend doing it once a month.
  2. JorgeB
  3. JorgeB
    Please use the existing support thread for the docker you're using:
  4. JorgeB
    Fix filesystem on disk1: https://wiki.unraid.net/Check_Disk_Filesystems#Checking_and_fixing_drives_in_the_webGui Run it without -n or nothing will be done, if it asks for it use -L.
  5. JorgeB
    If it passed the extended SMART test it should also pass a preclear, you can run multiple passes but since the disk is now working it might reduce its life, I would just use it normally and monitor.
  6. JorgeB
    I asked him to post here since I assumed it was an issue with the plugin only, @kcmccombsis this a problem with the plugin or is the Unraid server not able to access the internet, i.e., can you for example ping Google from the console? If the server can't access the internet post the diagnostics in your general support thread.
  7. JorgeB
    Emulated disk is mounting correctly, that why maintenance mode wasn't enough, disks look fine, you can rebuild on top and re-sync parity at the same time, since we can't see what happened it might be a good idea to replace/swap cables before doing it to rule that out if it happens again. https://wiki.unraid.net/Manual/Storage_Management#Rebuilding_a_drive_onto_itself
  8. JorgeB
    Start the array, as long as the emulated disk is mounting all you need to do is a standard disk replacement.
  9. JorgeB
    It's not, and please post the complete diags: Tools -> Diagnostics
  10. JorgeB
    Looks like a bad disk, but you should have also replaced or swap the power cable, just to make sure, that's why I said cables, not cable [emoji846]
  11. JorgeB
    This should never happen, you should have system notifications enable to be notified immediately when there's a problem, or it might be too late. Next time before doing this grab the diags or the syslog will be lost after powering back on. Start the array, grab the diagnostics and post the here.
  12. JorgeB
    DIsk1 is still generating ATA errors errors and the SMART report is incomplete, did you replace the cables?
  13. JorgeB
    Not ideal but usually OK, it will run at the lowest speed of the two (assuming the CPU could run the higher speed), same for CAS but in this case at the higher of the two, note that the reported CAS is for PC-10600, it will likely be the same at PC-8500. Depending on the server more ranks can run slower, especially with 2DPC, so use minimum number of ranks available for the DIMM size you want. This, like mentioned ideally all DIMMs should be identical.
  14. JorgeB
    That's a separate issue, do you have an attached monitor/IPMI? is it booting normally?
  15. JorgeB
    No, you need to rebuild them: https://wiki.unraid.net/Manual/Storage_Management#Rebuilding_a_drive_onto_itself You can do both at the same time.
  16. JorgeB
    As you prefer, if it just started you can cancel if not let it finish or you'll need to start over.
  17. JorgeB
    What is not working? Disk are now mounting, they weren't before, they are still disable, that is expected, you need to rebuild them to fix that, but first they have to mount and show the correct data.
  18. JorgeB
    Yes.
  19. JorgeB
    Don't understand, latest diags show both disks as mounted.
  20. JorgeB
    OK, so this was done after replacing disk1, in that case fix filesystem on disk1: https://wiki.unraid.net/Check_Disk_Filesystems#Checking_and_fixing_drives_in_the_webGui Run it without -n or nothing will be done, if it asks for -L use it.
  21. JorgeB
    There are some known spin down issues with v6.9.2, best bet for now is to downgrade to v6.9.1
  22. JorgeB
    Parity disk is invalid, when did that happen, after or before the rebuild was complete? Server was rebooted after the problem.
  23. JorgeB
    Parity disk dropped offline, this is usually a power/connection problem, replace cables and post new diags.
  24. JorgeB
    Not related. No, formatting will delete all the data. Please post the diagnostics: Tools -> Diagnostics
  25. JorgeB
    Both disks dropped offline, this is usually a power/connection problem, check/replace cables and post new diags so we can see the SMART reports.
×
×
  • Create New...