bmdegraaf

Members
  • Posts

    96
  • Joined

  • Last visited

Everything posted by bmdegraaf

  1. Is there a way to whitelist a webpage e.g. *.example.com to bypass the proxy settings? This mainly an IOS related problem as on my regular computer I can set certain websites to bypass the proxy. This feature is not available on IOS.
  2. I am also keen to set this up through docker. Any help is welcome. Tried to follow instructions on the original authors page: https://github.com/jens-maus/RaspberryMatic/wiki/Installation-Docker-OCI#start-of-content But getting the following error message : Error response from daemon: pull access denied for jens-maus/raspberrymatic, repository does not exist or may require 'docker login': denied: requested access to the resource is denied. Out of curiosity, what type of RF module are you using? HmIP-RFUSB ? Is it easy to passthrough an USB device to a docker container?
  3. I am using the preset. The only thing I changed was the port number of the proxy pass : server { listen 443 ssl; server_name nextcloud.*; include /config/nginx/ssl.conf; client_max_body_size 0; location / { include /config/nginx/proxy.conf; resolver 127.0.0.11 valid=30s; set $upstream_nextcloud nextcloud; proxy_max_temp_file_size 2048m; proxy_pass https://$upstream_nextcloud:444/;
  4. I am trying to get nextcloud to work under nextcloud.xxxxx.com I have sonarr, ombi, etc... working fine under their respective subdomains, but for nextcloud I keep getting a 502 Bad Gateway error nginx/1.12.2 I have followed the guide on linuxserver.io, including amending /config/www/nextcloud/config/config.php When accessing the nextcloud docker from within unraid [unraid IP adress:444], I do get the message that safari cannot access the page securely. Letsencrypt wise, the certificate is available.
  5. Hi JTok, can confirm that all is working as expected! Many thanks!
  6. Tried the script this morning all is working except skipping vdisks (vdisks_to_skip). The script hangs. Renaming the image from .img to .iso on the server and setting ignore_isos to "1" does skip the vdisk if wanted to exclude.
  7. Not sure if anyone else if facing this problem, but for me OVMF only works in conjunction with Q35-2.6 The boots stops halfway when using Q35-2.11 ** never mind, forgot to change to sata instead of virtio
  8. Do I start off with an OVMF or seabios template? Sent from my iPhone using Tapatalk
  9. That did the trick. Thanks! The migration did not go 100% for the settings, but hey, .... it’s still in beta.
  10. That is correct. It is recommended to temporarily increase memory when importing a big database by using parameter xmx 512. But how does one do this in a docker environment?
  11. Sorry, I was not to clear. I am trying to migrate my v1 database into v2
  12. My v1 database is quite large. How do I increase the memory settings? Keep getting java heap error messages when migrating.
  13. I am getting the following error message: [✗] DNS resolution is currently unavailable As a result, the block lists will not update... Can someone point me in the right direction?
  14. Hi gridrunner, would the sata connection be properly detected if i were to passthrough a disk to an OSX VM? Currently it sees the vdisk as a sata 1 connection?
  15. Hi Gridrunner, just wanted to say, it all just works! Just updated my XML with your directions and things seems to be more natively supported, e.g. cpu type etc is now being recognised correctly etc.. Got myself a cheap Gmyle bluetooth usb dongle the other day and having native bluetooth support (detecting apple keyboard and trackpad), GPU is passed through (GTX970) and working without the need for an additional HDMI sound kext, having native USB 3.0 support through the Inatech card ... Superb, and a great shout out to all contributers on the forum. I would almost say it is a golden build, if only QEMU would completely be supported in clover. I guess it is a matter of time.
  16. Thanks for the heads up. I am indeed also on 6.3rc6 as well. Will await the next rc release and see if regular clover works again.
  17. I am isolating cpu's and stubbing an usb pcie card in the syslinux: append pcie_acs_override=downstream vfio-pci.ids=1b73:1100 isolcpus=2,3,6,7 initrd=/bzroot I didn't change any clover or xml settings. XML basically comes from Gridrunner's video (Penryn, etc...). Added emulatorpin: <emulatorpin cpuset='1,5'/> and an usb, gpu passthrough to the XML <vcpu placement='static'>4</vcpu> <cputune> <vcpupin vcpu='0' cpuset='2'/> <vcpupin vcpu='1' cpuset='3'/> <vcpupin vcpu='2' cpuset='6'/> <vcpupin vcpu='3' cpuset='7'/> <emulatorpin cpuset='1,5'/> </cputune> It works fine with the patched file, but doesn't if i use the regular clover file.
  18. Se my comments here http://www.insanelymac.com/forum/topic/309087-insanely-fast-virtual-mac-qemu-ovmf-clover-and-native-graphics/page-23#entry2338923 Skickat från min iPhone med Tapatalk Unfortunately it did not work out for me: crumbling sound, and felt a bit slower, ... Edit Used the "newer" patched clover version mentioned in the insanelymac link without issues. Thanks for pointing to that!
  19. Do we still need to use the patched clover bootloader or is the latest clover version patched for use with QEMU?
  20. Problem solved! I installed the drivers from the anateck website... should not have done that. Reverting back to the windows 10 drivers and everything is working accordingly.
  21. Problem persists using pci-stub, although stub is claiming the pci. A cold boot into VM, everything works as it should. A VM reset, I can still login to the VM, but it is extremely slow. Third reboot and I cannot even start the VM and receive a pop up with the following message: Execution error internal error: qemu unexpectedly closed the monitor: 2016-12-17T15:42:06.737278Z qemu-system-x86_64: -device vfio-pci,host=03:00.0,id=hostdev2,bus=pci.0,addr=0x9: vfio: Error: Failed to setup INTx fd: Device or resource busy 2016-12-17T15:42:08.620251Z qemu-system-x86_64: -device vfio-pci,host=03:00.0,id=hostdev2,bus=pci.0,addr=0x9: Device initialization failed Log VM: 2016-12-17T15:42:06.737278Z qemu-system-x86_64: -device vfio-pci,host=03:00.0,id=hostdev2,bus=pci.0,addr=0x9: vfio: Error: Failed to setup INTx fd: Device or resource busy 2016-12-17T15:42:08.620251Z qemu-system-x86_64: -device vfio-pci,host=03:00.0,id=hostdev2,bus=pci.0,addr=0x9: Device initialization failed 2016-12-17 15:42:08.664+0000: shutting down, reason=failed Log unraid: Dec 17 16:38:46 unRAID kernel: vfio-pci 0000:03:00.0: timed out waiting for pending transaction; performing function level reset anyway Dec 17 16:38:47 unRAID kernel: vfio-pci 0000:03:00.0: Failed to return from FLR Dec 17 16:38:48 unRAID kernel: vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=io+mem:owns=none Dec 17 16:38:48 unRAID kernel: vfio-pci 0000:03:00.0: Refused to change power state, currently in D3 Dec 17 16:38:48 unRAID kernel: pci-stub 0000:03:00.0: claimed by stub
  22. please ssh into your server and copy the result of this. Should say reset next to your usb card/controller if it supports reset for iommu_group in $(find /sys/kernel/iommu_groups/ -maxdepth 1 -mindepth 1 -type d);do echo "IOMMU group $(basename "$iommu_group")"; for device in $(\ls -1 "$iommu_group"/devices/); do if [[ -e "$iommu_group"/devices/"$device"/reset ]]; then echo -n "[RESET]"; fi; echo -n $'\t';lspci -nns "$device"; done; done It should be able to reset itself: IOMMU group 13 [RESET] 03:00.0 USB controller [0c03]: Fresco Logic FL1100 USB 3.0 Host Controller [1b73:1100] (rev ff)
  23. Hi Gridrunner, Running the same USB pci card as you have. However, I keep running into problems when I restart my VM's. Either UNRAID freezes up or I am not able to start up the VM as the USB resource is busy. Are you experiencing the same? Is there anything I can do to check why my usb card is not resetting properly? Only a cold restart seems to resolve the problem. Running 6.3 rc6 Dec 17 13:26:18 unRAID kernel: vfio_ecap_init: 0000:03:00.0 hiding ecap 0xffff@0xffc Dec 17 13:26:18 unRAID kernel: vfio_ecap_init: 0000:03:00.0 hiding ecap 0xffff@0xffc Dec 17 13:26:18 unRAID kernel: vfio_ecap_init: 0000:03:00.0 hiding ecap 0xffff@0xffc Dec 17 13:26:18 unRAID kernel: vfio_ecap_init: 0000:03:00.0 hiding ecap 0xffff@0xffc Dec 17 13:26:18 unRAID kernel: vfio_ecap_init: 0000:03:00.0 hiding ecap 0xffff@0xffc Dec 17 13:26:18 unRAID kernel: vfio_ecap_init: 0000:03:00.0 hiding ecap 0xffff@0xffc Dec 17 13:26:18 unRAID kernel: vfio_ecap_init: 0000:03:00.0 hiding ecap 0xffff@0xffc Dec 17 13:26:18 unRAID kernel: vfio_ecap_init: 0000:03:00.0 hiding ecap 0xffff@0xffc Dec 17 13:26:18 unRAID kernel: genirq: Flags mismatch irq 16. 00000000 (vfio-intx(0000:03:00.0)) vs. 00000080 (ehci_hcd:usb1) Dec 17 13:26:18 unRAID kernel: vfio-pci 0000:03:00.0: Refused to change power state, currently in D3 Dec 17 13:26:19 unRAID kernel: vfio-pci 0000:03:00.0: timed out waiting for pending transaction; performing function level reset anyway Dec 17 13:26:20 unRAID kernel: vfio-pci 0000:03:00.0: Failed to return from FLR Dec 17 13:26:20 unRAID kernel: br0: port 2(vnet0) entered disabled state Dec 17 13:26:20 unRAID kernel: device vnet0 left promiscuous mode Dec 17 13:26:20 unRAID kernel: br0: port 2(vnet0) entered disabled state Dec 17 13:26:21 unRAID kernel: vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=io+mem:owns=none