rjstott

No I switched to Krusader

I upgraded to 6.4.0 abd Dolphin no longer starts. I get the below error on the screen and the following in the log Sun Jan 28 09:41:25 2018 vncext: VNC extension running! vncext: Listening for VNC connections on port 5901 vncext: created VNC server for screen 0 error opening security policy file /etc/X11/xserver/SecurityPolicy Openbox-Message: Failed to open the display from the DISPLAY environment variable. Xvnc Free Edition 4.1.1 - built Nov 18 2014 16:07:18 Copyright (C) 2002-2005 RealVNC Ltd. See http://www.realvnc.com for information on VNC. Underlying X server release 40300000, The XFree86 Project, Inc

Thankyou, the settings was just fine but deleting the file seems to have resulted in it having actually now gone. I have of course done this twice before and it didn't work and in the meantime I did clear up a lot of other lingering Docker files but heyho a good result.

I had terrible problems with all my dockers and part of the issue was that some of the files existed on both an array drive and the cache. I found the only way to get back to 'normal' was to delete all the support files in Appdata for Dockers on the array and the Cache then begin from scratch. You will lose all config data. It might be possible to copy some files elsewhere onto the array into a directory with a completely different name. This did work for me for everything I was worried about except Plex, where the support files are so numerous my server continually crashed. I still have a Docker.img file that exists on the cache and in the array that I can't fix. I also have a Mariadb database that I can't access but Nodered can. When copying make sure that you get the files you want as there may be two, one on the array and one on the cache.

Please find screenshot as requested

My system is a mess since upgrading to 6.4.0 as it forced a cache format. I have resolved a lot (and lost a lot) but the latest one defeats me. The Docker.img file is shown as on the Cache where it should be and on an array drive. This confuses me and confuses Mover. I have deleted the Docker.img file and rebuilt my Dockers but the problem has persisted. I see other reports with solutions that should have worked if I deleted and recreated the Docker.img file. The file I use is 60GBytes so please don't tell me its run out of space and because of the issue I have yet to rebuild most of my Dockers. Here is Mover log: Jan 26 00:09:02 Media root: mover: started Jan 26 00:09:02 Media root: move: file /mnt/disk3/apps/Docker/docker.img Jan 26 00:09:02 Media root: move_object: /mnt/disk3/apps/Docker/docker.img File exists Jan 26 00:09:02 Media root: move_object: /mnt/disk3/apps/Docker: Directory not empty Jan 26 00:09:02 Media root: move_object: /mnt/disk3/apps: Directory not empty Jan 26 00:09:02 Media root: mover: finished Did I miss a real fix that works? I lost Docker data because the backup files I created suffered a similar fate and it has been difficult to establish which files were in current use etc.

Hi, Just tried this and get an error as follows: "root@localhost:# /usr/local/emhttp/plugins/dynamix.docker.manager/scripts/docker run -d --name="FreePBX13" --net="bridge" -e TZ="Europe/Berlin" -e HOST_OS="unRAID" -p 8082:8082/tcp -p 5060:5060/tcp mima84/docker-freepbx Unable to find image 'mima84/docker-freepbx:latest' locally Pulling repository docker.io/mima84/docker-freepbx /usr/bin/docker: Network timed out while trying to connect to https://index.docker.io/v1/repositories/mima84/docker-freepbx/images. You may want to check your internet connection or if you are behind a proxy.. See '/usr/bin/docker run --help'. The command failed." Tried a second time and it has installed ok. Let's see what we can do! Thanks for the Docker, I'm sure there will be a lot of interest.

Hi, just tried to install this docker and get an error as follows: "root@localhost:# /usr/local/emhttp/plugins/dynamix.docker.manager/scripts/docker run -d --name="HADashboard" --net="" -e TZ="Europe/Berlin" -e HOST_OS="unRAID" -v "/mnt/cache/apps/Docker/apps/hadashboard/lib":"/lib":rw -v "/mnt/cache/apps/Docker/apps/hadashboard/dashboards":"/dashboards":rw -v "/mnt/cache/apps/Docker/apps/hadashboard/hapush":"/hapush/":rw -v "/mnt/cache/apps/Docker/apps/hadashboard/widgets":"/widgets":rw jcreynolds/docker-hadashboard 508f63bdcb2ded5c1559bf957751524e9a97f29a5e567110207db8395e3a426b docker: Error response from daemon: Container command not found or does not exist.." Am I missing something? The subdirectories have been created but they are all empty!

Hi, Many thanks, and yes you are right about posting, however as there are numerous error messages in the Plex startup log it is not always easy to know what is important and what isn't. I like lots of others suffer dreadfully when changes are made such that what we had stops working, the instructions for setting up no longer match reality and because it is so long since we actually set things up we are a bit blase about doing it. IMHO a missing / shouldn't cause so much grief and if it is so vital or obvious it should get better error reporting (perhaps you ommitted the / in the path definition). As a quick work around 'for example' I just tried to install the Plex server on my Mac. All went well BUT similarly the client refused to see the Media! The only thing that worked was to use 'Analyze' which I've never ever used before! Really appreciate the help

Hi, here is the data you asked for and a short commentary. 1) Add Docker without path to Media (attach 1) 2) Plex start up, some network errors, I think I can ignore? (attach 2). Plex runs with Metadata but no Media 3) Add path to Media (attach 3) 4) Click done and Docker command fails and orphans the image (attach 4) I understand the path process and although it has changed this surely right? The Media is in sub-folders below LP2015 which I can map in Plex Plex_Docker_install.txt Plex_Log.txt Add_path_result.txt

I just switched to this docker and I'm encountering some problems. 1) I don't see anywhere to tell Plex where my media is. Previously I created paths to each Plex Category but there doesn't seem to be anywhere to add even a single path by default although the instructions imply there is 2) So I add a simple Path config and the following error pops up - Says something about 'Invalid volume destination path: 'LP' mount path must be absolute.' but I use all I did was provide a name and use the path select process /mnt/user etc 3) Then the Docker disappears and I am left with an empty orphan image file needing deleting? 4) The default config file should be on the cache but it isn't so this needs correcting every install? 5) Adding the Media path after a start (which Plex does though no media files just metadata) kills the image as per 2) I did visit the Linuxserver.io forum where there are reports of others with problems. Just tried the needo version and get this same error 'Invalid volume destination path: 'LP' mount path must be absolute' Advice/help please

Thanks for the pointer. Changing this docker setting from Bridge to Host fixes both of my problems and now I just have to decide which devices I will use to generate the sound output! I have to say I do like the Raspberry Picore solution with an audio amp board addon. This gives both a player and airplay output solution. The Chromecast produces some video to show what is playing and I might go with this for my main in-house sound. The error message I reported is still there but an old post somewhere said this might be a red herring!

Logitech Media Player (Airplay and Chromecast Bridges) I have LMS happily working but want to integrate Airplay and Chromecast devices. The approprate LMS Plugins have been installed and appear to run but neither finds any device to bridge. I get the following errors "[16-08-14 15:20:28.0236] Slim::Networking::Async::Socket::UDP::mcast_add (48) Error: While adding multicast membership, UPnP may not work properly: Invalid argument" in the LMS docker log. This may or may not be relevant. Both plug-ins have an option to set the LMS IP address or auto-discover. Which IP address would I set, the internal 172... or the external 192... Can the plugins find the airplay and chromecast devices from the docker? I see someone else wanting airplay, had any success?

I did the update but I still have the Black Screen.

Well I updated and like those above my Blackscreen persists. Please, has anyone got the cure for this?

I tried the suggestion above, here is the logfile, it didn't help and the alternate browser gives the same black window! There are some errors in there but are they significant? Is this log what should be expected? The banner at the top of the Black window says connected to Crashplan but I somehow doubt I have that connection? Xvnc TigerVNC 1.6.0 - built Dec 24 2015 16:05:46 Copyright © 1999-2015 TigerVNC Team and many others (see README.txt) See http://www.tigervnc.org for information on TigerVNC. Underlying X server release 11202000, The X.Org Foundation Sun Apr 10 00:18:43 2016 vncext: VNC extension running! Apr 10 00:18:43 Media syslog-ng[46]: syslog-ng starting up; version='3.5.3' vncext: Listening for VNC connections on all interface(s), port 4239 vncext: created VNC server for screen 0 Warning: could not find self.pem Using local websockify at /opt/novnc/utils/websockify/run Starting webserver and WebSockets proxy on port 4280 Openbox-Message: Unable to find a valid menu file "/var/lib/openbox/debian-menu.xml" Starting CrashPlan Desktop... Navigate to this URL: http://Media:4280/vnc.html?host=Media&port=4280 Press Ctrl-C to exit WARNING: no 'numpy' module, HyBi protocol will be slower Sun Apr 10 00:31:26 2016 Connections: accepted: 127.0.0.1::41542 SConnection: Client needs protocol version 3.8 Sun Apr 10 00:31:27 2016 SConnection: Client requests security type VncAuth(2) Sun Apr 10 00:31:35 2016 VNCSConnST: Server default pixel format depth 24 (32bpp) little-endian rgb888 VNCSConnST: Client pixel format depth 24 (32bpp) little-endian rgb888 Sun Apr 10 00:32:19 2016 Connections: accepted: 127.0.0.1::41602 SConnection: Client needs protocol version 3.8 SConnection: Client requests security type VncAuth(2) Sun Apr 10 00:32:29 2016 VNCSConnST: Server default pixel format depth 24 (32bpp) little-endian rgb888 VNCSConnST: Client pixel format depth 24 (32bpp) little-endian rgb888 Sun Apr 10 00:32:50 2016 Connections: closed: 127.0.0.1::41602 (Clean disconnection) EncodeManager: Framebuffer updates: 1 EncodeManager: Tight: EncodeManager: Solid: 1 rects, 786.432 kpixels EncodeManager: 16 B (1:196609 ratio) EncodeManager: Bitmap RLE: 1 rects, 160 pixels EncodeManager: 69 B (1:9.44928 ratio) EncodeManager: Total: 2 rects, 786.592 kpixels EncodeManager: 85 B (1:37016.4 ratio)

I can't get started with Crashplan. I'm running 6.1.9 and Crashplan installs ok but when I start it I get a black screen which say is is logged in but won't do anything. I did exacly the same installation on a friends 6.1.9 and it installed and let me create a login into Crashplan etc. I've downloaded the Docker a number of times, I've removed it and reset the Community entry nothing gets the VNC screen to access the Crashplan site. The only clue I have is that the Docker setup screen isn't the same as the one that worked, as it has additional Container Volume entries which seem redundant (i.e. one is named UNRAID?). Has anyone a clue?

Still playing with Homebridge on a Rasp PI but plugins are installed using 'npm' which is an incremental process on the pi (i.e. you add each plugin as you need it) but for a docker I guess a start script could scan a plugin directory and install all the plugins at start up time? Otherwise, there isn't a UI and other than a log file the setup should be easy, though try as I might I have never managed to get a docker working unless some kind sole creates the necessary and adds it into the 'community'.

And here is another +1

Hi, All deleted and a fresh start. This is the log: => Installing MySQL ... Installing MySQL system tables... OK Filling help tables... OK To start mysqld at boot time you have to copy support-files/mysql.server to the right place for your system PLEASE REMEMBER TO SET A PASSWORD FOR THE MySQL root USER ! To do so, start the server, then issue the following commands: /usr/bin/mysqladmin -u root password 'new-password' /usr/bin/mysqladmin -u root -h 5e73e4deab69 password 'new-password' Alternatively you can run: /usr/bin/mysql_secure_installation which will also give you the option of removing the test databases and anonymous user created by default. This is strongly recommended for production servers. See the manual for more instructions. You can start the MySQL daemon with: cd /usr ; /usr/bin/mysqld_safe & You can test the MySQL daemon with mysql-test-run.pl cd /usr/mysql-test ; perl mysql-test-run.pl Please report any problems at http://bugs.mysql.com/ Waiting for MySQL to start... Waiting for MySQL to start... Waiting for MySQL to start... Waiting for MySQL to start... Waiting for MySQL to start... Waiting for MySQL to start... Waiting for MySQL to start... Waiting for MySQL to start... And of course it goes on this way. Here are the mappings: /var/lib/phpfiwa /mnt/cache/apps/Docker/apps/emon/fiwa/ /var/lib/phpfina /mnt/cache/apps/Docker/apps/emon/fina/ /var/lib/phptimeseries /mnt/cache/apps/Docker/apps/emon/time/ /etc/mysql /mnt/cache/apps/Docker/apps/emon/mysql/ /var/lib/mysql /mnt/cache/apps/Docker/apps/emon/mysqllib/ The environment variable MYSQL_PASSWORD is set to emoncms but yet there is still no GUI. The log implies I should be doing some extra things directly, should I?

Hi thanks but I created the additional folders so each fas its own. The CMS log has changed to look like => Using an existing volume of MySQL Waiting for MySQL to start... Waiting for MySQL to start... Waiting for MySQL to start... Waiting for MySQL to start... Waiting for MySQL to start... Waiting for MySQL to start... Waiting for MySQL to start... Waiting for MySQL to start... I think I did see it start once in the log but now it is a long wait! I don't have sql anywhere else, unless Emby or Plex hide it. The WebUI still doesn't run. The unRaid main log file now has this for Start through to Stop Nov 28 20:09:30 Media autofan: Highest disk temp is 29°C, adjusting fan speed from: OFF (0% @ 0rpm) to: 372 (145% @ 903rpm) Nov 28 20:09:34 Media php: /usr/local/emhttp/plugins/dynamix.docker.manager/scripts/docker 'start' 'Emoncms' Nov 28 20:09:34 Media kernel: device vethce9f7e9 entered promiscuous mode Nov 28 20:09:34 Media kernel: docker0: port 1(vethce9f7e9) entered forwarding state Nov 28 20:09:34 Media kernel: docker0: port 1(vethce9f7e9) entered forwarding state Nov 28 20:09:34 Media avahi-daemon[21294]: Withdrawing workstation service for vetha0b9f82. Nov 28 20:09:34 Media kernel: docker0: port 1(vethce9f7e9) entered disabled state Nov 28 20:09:34 Media kernel: eth0: renamed from vetha0b9f82 Nov 28 20:09:34 Media kernel: docker0: port 1(vethce9f7e9) entered forwarding state Nov 28 20:09:34 Media kernel: docker0: port 1(vethce9f7e9) entered forwarding state Nov 28 20:09:36 Media ntpd[1424]: Listen normally on 9 docker0 172.17.42.1:123 Nov 28 20:09:36 Media ntpd[1424]: new interface(s) found: waking up resolver Nov 28 20:09:38 Media emhttp: cmd: /usr/local/emhttp/plugins/dynamix.docker.manager/scripts/docker logs --tail=350 -f Emoncms Nov 28 20:09:49 Media kernel: docker0: port 1(vethce9f7e9) entered forwarding state Nov 28 20:11:39 Media emhttp: cmd: /usr/local/emhttp/plugins/dynamix/scripts/tail_log syslog Nov 28 20:12:21 Media emhttp: cmd: /usr/local/emhttp/plugins/dynamix.docker.manager/scripts/docker logs --tail=350 -f Emoncms Nov 28 20:12:26 Media emhttp: cmd: /usr/local/emhttp/plugins/dynamix.docker.manager/scripts/docker logs --tail=350 -f Emoncms Nov 28 20:12:52 Media php: /usr/local/emhttp/plugins/dynamix.docker.manager/scripts/docker 'stop' 'Emoncms' Nov 28 20:13:02 Media kernel: vetha0b9f82: renamed from eth0 Nov 28 20:13:02 Media kernel: docker0: port 1(vethce9f7e9) entered disabled state Nov 28 20:13:02 Media kernel: docker0: port 1(vethce9f7e9) entered disabled state Nov 28 20:13:02 Media avahi-daemon[21294]: Withdrawing workstation service for vetha0b9f82. Nov 28 20:13:02 Media kernel: device vethce9f7e9 left promiscuous mode Nov 28 20:13:02 Media kernel: docker0: port 1(vethce9f7e9) entered disabled state Nov 28 20:13:02 Media avahi-daemon[21294]: Withdrawing workstation service for vethce9f7e9. Nov 28 20:13:04 Media ntpd[1424]: Deleting interface #9 docker0, 172.17.42.1#123, interface stats: received=0, sent=0, dropped=0, active_time=208 secs Thanks for your help

I pointed all the volume mappings to a folder called emon on my cache drive.Below is the list from the Docker page.: /var/lib/phpfina /mnt/cache/apps/Docker/apps/emon/ /var/lib/phptimeseries /mnt/cache/apps/Docker/apps/emon/ /etc/mysql /mnt/cache/apps/Docker/apps/emon/mysql /var/lib/mysql /mnt/cache/apps/Docker/apps/emon/mysql /var/lib/phpfiwa /mnt/cache/apps/Docker/apps/emon/ This is probably hopelessly wrong. Could you let me know what I need or where to find info? Most installs 'probably' aren't like unRaid so being a novice and a User rather than a developer shows my limits!

I just set up this docker (or at least I think I did), two problems. 1) "Waiting for MySQL to start" is repeating in the log file so startup isn't right (probably 'cos I got the setup wrong) 2) The WEBUI isn't running so no way to get into the package. Anyone got this working and could elaborate on the setup requirement? If I can get this working then I can move on to buy some of the "Openenergymonitor" kit! Thanks

OK recreated the Docker.img and can now run openhab without log errors as below. Note I deliberately restarted the openhab because the UI is back to complaining there is no config file. "NO openhab.cfg CONFIGURATION FOUND" Anyway if I type http://192.168.1.103:8080/openhab.app?sitemap=demo then it works. Any chance this could be corrected in the script that starts the wenGUI or is this something I need to do somewhere. Anyways now I can have a play! Thanks. And deleting the img file and re-creating it is a breeze as all previous settings are retained!