ashman70

I'm getting really frustrated with a certain feature in Emby and not sure if I should go to the Emby forums for this. When I go to look at my TV Shows and its set to display as a poster, it shows some with posters and others with banners. I've changed the banners to posters five or six times now but they always seem to revert back to banners. Similarly with my movies, I've got them set to display as posters and I'll go in and change the poster to one I like, but they always seem to revert. I am doing this as the default user appuser with full permissions. Any idea whats going on and why my changed aren't being saved? I've even gone into metadata manager, made the change and saved it thinking that would help, nope.

Yup that worked, thanks Squid and CHBMB!! AM

I can't seem to get it to work, I can add the path to the docker but when I add it to Emby it doesn't scan it, although it doesn't complain about being able to access, it doesn't seem to be able to. AM

I am trying to add my media libraries on my second UnRaid server as network shares but I am unable to do it for some reason. I am adding \\IP address\share name but it keeps kicking it back to me, these are not open shares and perhaps that is the problem, they require a user name and password usually. I have added them as remote shares using the unassigned devices plugin, even copying and pasting the mount point into Emby, it takes it but cant access it. Is there a way to do what I am trying to do?

OK thanks, I have installed it, its just indexing my media which seems will take forever ;-) AM

Is anyone running Emby and Plex on the same server? Do they play well together, any issues?

Is Emby like Kodi? I have visited the Emby site but still can't quite figure out if its exactly like Kodi or something else?

Installing office from floppy was worse, it was 50 floppies, nothing beats getting to floppy #48 and it can't read, nice....... Ah, Windows 95, I remember the 20+ floppy disks. Nothing beats getting to floppy 18 and being told it can't be read.

The bigger problem is that your Core 2 Duo CPU is only dual core and does not support hyper threading, so its really unsuitable for virtualization because you simply don't have enough cores to use for a virtual machine.

For whatever reason, it doesn't work for me.

I am trying to figure out how to pass a USB keyboard and mouse through to a VM I have setup. In the log I just noticed this: Jan 17 19:23:32 Tower kernel: input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6:1.0/0003:413C:2105.0007/input/input11 Jan 17 19:23:34 Tower kernel: input: Logitech Lenovo USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.7/4-1.7:1.0/0003:17EF:6019.0008/input/input12 If I want to pass the entire controller through would that translate into: hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x00' slot='0x1d' function='0x0'/> </source> </hostdev>

I have an Intel Core i3 at 2.9GHz and doing 3 disks simultaneously is about the max my processor can handle. Doing 6 disks simultaneously on a Core 2 Duo is likely going to kill the processor. Ok thanks for that, I have broken them down into groups of two disk now, we'll see how that goes. Thanks.

I am new to this plugin and have a question, is it necessary to select the option:Save new hashing results to flash? If I don't select this where are they, if they are at all, saved? Also how much CPU horsepower does doing a file integrity use? I realize it depends on the number of disks selected, the hashing algorithm and the type of CPU. In my system I have a Core 2 Duo 3GHz with 8GB of RAM, I have selected 4 groups each with 6 disks in it to run on a weekly schedule. I use my server as a backup with a few dockers. Can you speculate on how taxed my CPU may be doing an integrity check on 6 disks?

Correct, you will never pass through Bus 003 but it would still be good to figure out which USB slots belong to Bus 003 for future reference. Its all the ports on the rear of my motherboard, I know because I plugged a USB flash drive into the empty slots and ran the command, as well I can see whats plugged into those slots corresponds with bus 003. So I am just going to pass through bus 004 then.

So I am just starting this and this is the USB output from Putty for my system. Linux 4.1.13-unRAID. root@Backup:~# lspci | grep USB 00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family US B xHCI Host Controller (rev 04) 00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family US B Enhanced Host Controller #2 (rev 04) 00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family US B Enhanced Host Controller #1 (rev 04) root@Backup:~# lsusb Bus 004 Device 003: ID 413c:2105 Dell Computer Corp. Model L100 Keyboard Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 005: ID 2109:0810 Bus 003 Device 004: ID 05dc:a205 Lexar Media, Inc. Bus 003 Device 003: ID 051d:0002 American Power Conversion Uninterruptible Power Supply Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 003: ID 2109:0810 Bus 002 Device 002: ID 2109:0810 Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub The Lexar on Bus 03 is the USB flash drive I use to boot UnRaid, so I am assuming I don't want to pass trhough Bus 003 at all, correct? Or do I to plug a flash drive into to different ports still and run this command to see what ports are on Bus 003?

Does anyone know if UnRaid 6.x would run fully supported on an Apple Mac Pro from 2006 onward to say 2010 model?

It could be like trying to find a needle in a haystack, the differences between the two hypervisors are many from the little I have read about the hypervisor in UnRaid. I see a few things that jump out, maybe they are nothing... <vmtemplate name="Custom" icon="windows98.png" os="windowsxp"/> Why windows XP? <type arch='x86_64' machine='pc-i440fx-2.3'>hvm</type> Windows 98 was 16 bit, XP came in 32 and 64 bit versions.. not sure if this matters. Im am familiar with virtualization and VMWare, just not the hypervisor in UnRaid, so sorry I can't be of anymore help.

I am new to UnRaid, I just built my server yesterday in fact and I am trying to get the pre clear working, however a pop up shows up every time I try to use the plugin and is asking for a Yes or No prompt and I cannot seem to figure out how to enter Yes so the pre clear will continue. Do I need to modify the script or something? I am not terribly proficient with Linux but could probably do it. Thanks AM