Urlryn

Members
  • Posts

    39
  • Joined

  • Last visited

Everything posted by Urlryn

  1. Was renaming some anime episodes....26 of them total. Ends up crashing filebot completely. Pulled this from the logs Tried multiple times...same results.
  2. Great....letting it finish the format/rebuild and heading to bed! Appreciate the assistance trurl! Urlryn
  3. So I started the array and Parity-Sync/Rebuild is in progress.... All drives showing green.... but the 2 new drives the file format is set to Auto instead of XFS and unmountable. Will this be corrected during the sync? (don't think it will but asking to be sure) Do i need to stop the rebuild and start the array in maintenance mode and then format them there? Or can I just click the available button for "Format will create a file system in all Unmountable disks"? and do I need to stop the parity sync first before starting a format? Urlryn
  4. Ok one more question here... Replaced the PSU and have the 2 replacement drives in. But best news was I didn't lose anything. I had put the 2 drives in because a couple of my shares were getting close to max but looks like no data was saved to those 2 drives. Booted up system finally! Did the preclear on both drives Went to Tools > New Config > Retain current configuration: All > Apply Verified all drives are where they should be At this point I should be able to start the array.....just curious about the "Parity is Already Valid". Since these are new drives i'm assuming it has to rebuild parity even though the old drives were empty and replaced with empty? Thanks Urlryn
  5. Looks like the PSU. Pulled out 2 new drives. Connected them via my USB HHD dock and both powered on and identified in windows. Put them in the case...plugged them up and the power on/off loop happened again. Took the drives out...one is dead. So all my other drives boot up no problem...so might be one or 2 of the connectors on the back of the PSU thats bad. So pulled it and getting a new one.....HGST gonna love me... 3 RMAs! Urlryn
  6. Bummer...so just replace / reassign is about all i can do then. Wish I knew.....they were all working prior to the move. All the drives are HGST NAS 4TB disks. 8 total. 4 + parity were from the first batch purchased when I built the system. The last 3 are from a second batch that was purchased a couple years later (since were on sale). Other than the initial power on/off loop problem...there was no indications of drive problems or failures. No errors in smart or anything. Yeah I've tried 2 different power supplies/computers even have a external usb drive caddys and not a peep. Probably the PCB board. I do have a two new parity disks to add at least...5TB ones (were cheaper than the 4TB at the time). So guess that will be my project this weekend after get these dead disks replaced. Also is there a way to see what shared the drives were assigned outside the GUI since you can't view that without the array being online? Thanks Urlryn
  7. Everything has been running great for a long while. Reboots/parity checks and all that stuff all been green. This past weekend I shutdown the server to move all the hardware to a new case. Started up the server...it went into a power on/off loop for some reason. After troubleshooting it ended up being my last 2 drives, that were added to the array at some point, are completely dead now. No power...nothing. Luckily one drive didn't have any data yet on it but the other....had some data. So I hope we can recover that one since I have only 1 parity drive installed. Do I just put both replacement disk in and assign them both to the "old" drives? How do I make sure the system tries to rebuild the one drive with data vs the other? Thanks Urlryn
  8. One other thing I've noticed using the web GUI....wondering if its a issue with it or is this another issue with my Unraid... A lot of the time when you go into the profiles and say you download something in forge. It gets to about 37% then the screen refreshes to a blank screen. Reload the entire page...go back into profiles.....forge is no longer an option to select. The option disappeared. Go to the server screen....you can't assign that forge version to the server since its not showing. Same with the actual .JAR file. Takes a few refreshes/restarts and stuff to get it back. Wondering if i'm having a issue with my docker image or could it be something else? Though this is the only docker I am having issues with. Granted I don't have many but still. Has anybody seen issues like this and/or had some recommendations/ideas what might be going on? Thanks Urlryn
  9. Ended up restarting my Unraid box and now its working again...go figure! Had to create new servers with same name and stuff...and then it would let me restore them
  10. I've had MineOS installed for a long while and everything was working fine. Kids got busy doing other things...stopped playing. Upgraded Unraid not to long ago.....and now kids want to play again. Started the docker and webUI wasn't working. Checked logs and shows this: Created user: xxxx (uid: 1000) Generating Self-Signed SSL... Generating a RSA private key ...................................................................................................................................................+++++ ...+++++ writing new private key to '.tmpkey.pem' ----- writing RSA key 2020-04-30 08:30:13,299 CRIT Supervisor running as root (no user in config file) 2020-04-30 08:30:13,299 INFO Included extra file "/etc/supervisor/conf.d/mineos.conf" during parsing 2020-04-30 08:30:13,307 INFO RPC interface 'supervisor' initialized 2020-04-30 08:30:13,307 CRIT Server 'unix_http_server' running without any HTTP authentication checking 2020-04-30 08:30:13,307 INFO supervisord started with pid 1 2020-04-30 08:30:14,310 INFO spawned: 'mineos' with pid 30 2020-04-30 08:30:14,616 INFO exited: mineos (exit status 1; not expected) 2020-04-30 08:30:15,620 INFO spawned: 'mineos' with pid 40 2020-04-30 08:30:15,887 INFO exited: mineos (exit status 1; not expected) 2020-04-30 08:30:17,891 INFO spawned: 'mineos' with pid 50 2020-04-30 08:30:18,153 INFO exited: mineos (exit status 1; not expected) 2020-04-30 08:30:21,160 INFO spawned: 'mineos' with pid 60 2020-04-30 08:30:21,432 INFO exited: mineos (exit status 1; not expected) 2020-04-30 08:30:21,432 INFO reaped unknown pid 70 2020-04-30 08:30:22,434 INFO gave up: mineos entered FATAL state, too many start retries too quickly Checking /var/log/mineos.log (cleaned it up a bit to make it a bit easier to read) {"date":"Thu Apr 30 2020 08:32:42 GMT-0500 (CDT)", "process":{"pid":39,"uid":0,"gid":0, "cwd":"/usr/games/minecraft", "execPath":"/usr/bin/node", "version":"v8.9.4", "argv":["/usr/bin/node","/usr/games/minecraft/webui.js"], "memoryUsage":{"rss":49614848,"heapTotal":32874496,"heapUsed":13493608,"external":348363}}, "os":{"loadavg":[0.1923828125,0.1494140625,0.103515625], "uptime":2831844}, "trace":[{"column":11,"file":"util.js","function":"_errnoException","line":1022,"method":null,"native":false}, {"column":19,"file":"fs.js","function":"FSWatcher.start","line":1374,"method":"start","native":false}, {"column":11,"file":"fs.js","function":"Object.fs.watch","line":1400,"method":"watch","native":false}, {"column":8,"file":"/usr/games/minecraft/server.js","function":null,"line":138,"method":null,"native":false}, {"column":5,"file":"/usr/games/minecraft/server.js","function":"newserver.backend","line":150,"method":"backend","native":false}, {"column":12,"file":"/usr/games/minecraft/webui.js","function":null,"line":173,"method":null,"native":false}, {"column":30,"file":"/usr/games/minecraft/node_modules/async/lib/async.js","function":null,"line":1108,"method":null,"native":false}, {"column":37,"file":"/usr/games/minecraft/node_modules/async/lib/async.js","function":null,"line":166,"method":null,"native":false}, {"column":13,"file":"/usr/games/minecraft/node_modules/async/lib/async.js","function":null,"line":726,"method":null,"native":false}, {"column":16,"file":"/usr/games/minecraft/node_modules/async/lib/async.js","function":null,"line":52,"method":null,"native":false}], "stack":["Error: watch /var/games/minecraft/servers ENOSPC"," at _errnoException (util.js:1022:11)"," at FSWatcher.start (fs.js:1374:19)"," at Object.fs.watch (fs.js:1400:11)"," at /usr/games/minecraft/server.js:138:8"," at new server.backend (/usr/games/minecraft/server.js:150:5)"," at /usr/games/minecraft/webui.js:173:12"," at /usr/games/minecraft/node_modules/async/lib/async.js:1108:30"," at /usr/games/minecraft/node_modules/async/lib/async.js:166:37"," at /usr/games/minecraft/node_modules/async/lib/async.js:726:13"," at /usr/games/minecraft/node_modules/async/lib/async.js:52:16"],"level":"error","message":"uncaughtException: watch /var/games/minecraft/servers ENOSPC","timestamp":"2020-04-30T13:32:42.356Z"} I've uninstalled and reinstalled multiple times. I've tried installing a second instance using different names. Tried manually installing the docker using: Not sure whats going on...so hoping someone may have a suggestion. Thanks Urlryn
  11. I will try and take a look sometime this week! I'll post anything I find up. Also quick question...how do you see what version is currently installed? Console you can just do filebot -version from cmd line. but wasn't sure how to pull that within docker or the UI. Thanks Urlryn
  12. Ran into a strange issue using the [{crc32}] attribute during the matching/fetching process. When you do the initial fetch it is only adding the brackets [] to the file name. Not the actual crc info inside of the brackets. But before you go and select rename....you can go to the edit format option. Then without changing anything just click "use format". It updates the name correctly with the crc32 like its supposed to. I thought it might be a error in my format....so i deleted it and just used {n} [{crc32}] and got the same results as described above. Thanks Urlryn
  13. Well got it to finally work. Probably not the way it should be working. If not...would welcome some recommendations on how to fix. First I had to change user_ID to 0 (root) and Group_ID to 0 (root) instead of using Nobody/Users. Also when the new folders were being created...they were being set with no permissions at all. So needed to update the script to include --def "exec=chmod -R 777 '{folder}'" Some folks reported issues sometimes with the above command. You may need to escape the quotes. --def "exec=chmod -R 777 \"{folder}/\" Some info I found in a post from rednoah Since I wasn't finding a whole lot regarding this problem...Thought I'd throw up a bit more information for other folks. Urlryn
  14. Been using GUI filebot for a long time with no issues...but decided to try the docker version. So I just installed the docker...thought I had the configs done and ran a test. Nothing happened. So decided to check the logs...and it looks like permissions issues Locking /config/amc.log Error during startup: java.nio.file.AccessDeniedException: /nobody/.filebot/cache java.lang.ExceptionInInitializerError at net.filebot.Main.main(Main.java:107) Caused by: net.sf.ehcache.CacheException: java.nio.file.AccessDeniedException: /nobody/.filebot/cache at net.filebot.CacheManager.<init>(CacheManager.java:36) at net.filebot.CacheManager.<clinit>(CacheManager.java:22) ... 1 more Caused by: java.nio.file.AccessDeniedException: /nobody/.filebot/cache at net.filebot.util.FileUtilities.createFolders(FileUtilities.java:183) at net.filebot.CacheManager.acquireDiskStore(CacheManager.java:73) at net.filebot.CacheManager.<init>(CacheManager.java:33) ... 2 more /files/filebot.sh: line 56: /tmp/tmp.Lcc6U1bZRb: Permission denied sort: write failed: standard output: Broken pipe sort: write error Went to look at the permission for /nobody/.filebot/cache? drwxr-xr-x 1 nobody users 86 Feb 27 14:05 nobody The changed directory to .filebot and the cache directory and everything thats supposed to go under it isn't being created. For a test I manually created each of the folders and the .lock file. Chmod 0777 all of it and it started running. Stop filebot...start it again. cache and everything under it is removed and permissions on nobody/.filebot are reverted back. Checking the /tmp folder permissions (which i've never touched since installing unraid)...it looks like its root/root. Should I change the permission on that folder or point it to another directory like /config/tmp? So there is definitely some permission issues...just what do i need to do to fix this mess? Thanks Urlryn
  15. I replaced my cache drive (larger one). So following the directions...i changed the appdata share to cache:Yes Once I finished adding the new drive in and updated the appdata share back to cache:prefer...then to cache:only. I noticed (and this maybe normal but wanted to be sure) The docker.img file. It shows up in a couple locations. /mnt/user/docker.img /mnt/cache/docker.img Is it supposed to still show in /mnt/user? if not...it can be deleted without affecting the one in cache? Wasn't sure if its was the "same" file or if it was a copy and wasting additional space. Thanks Urlryn
  16. Figured it out.... Did a couple test runs for some of my anime stuff and everything transferred nicely! --Finds any anime folder starting with Kidou and merges them to disk1 find "/mnt/user/media/anime" -name "Kidou*" -mindepth 1 -maxdepth 1 -type d -print0 | xargs -0 -n 1 -I {} consld8 -t {} disk1 --Finds any folder starting with A or B and merges them to disk1. This will omit any folder whose name is only a single letter A or b find "/mnt/user/media/anime" \( -name '[ab]*' \) -mindepth 1 -maxdepth 1 -type d -print0 | xargs -0 -n 1 -I {} consld8 -t {} disk1 --If you also want to include those above, you will need to specify another pattern: the name must match either [ab]* or [ab] find "/mnt/user/media/anime" \( -name '[ab]*' -o -name '[ab]' \) -mindepth 1 -maxdepth 1 -type d -print0 | xargs -0 -n 1 -I {} consld8 -t {} disk1 *Note...the commands are set with the -t switch. So will need to change this to -f when you are ready to do the actual move/merge. Please test before changing it! Urlryn
  17. Is there a way to expand on this command to find a group of folders starting with the letter M...something like this for example: find "/mnt/user/Media/Movies" -name "M*" -mindepth 1 -maxdepth 1 -type d -print0 | xargs -0 -n 1 consld8 -f disk1 Well obviously that didn't work since consld8 requires a share specified! Right now having to do one folder at a time sucks since i'm trying to move stuff to Disk1 or Disk2 for organizational purposes. So I don't want to do a full disk4 to disk1. Not enough room even if I did! Thanks Urlryn
  18. Thanks for the information and suggestions! Really helps! Now for the fun stuff...getting this all sorted and moved! Urlryn
  19. I'm moving around Movies, Anime and TVShows. I started with Anime. As for special characters...most don't have anything outside the norm. They typically will have a period, comma, dash, squared brackets and/or exclamation points. See the screen shots Sample folder listing Sample File Name List: As for the size....I've tried multiple tests. The error happens with selecting 1 folder, Bleach for example, or selecting many of folders. Selection total > 20GB fails Selection total < 20GB transfers no problem Folder Selection < 20GB Completed: So now i'll select the same 3 series + add Bleach. This batch will be > 20GB. Click Proceed and goes right to here: Log only shows this one error: W: 2017/12/17 08:38:20 server.go:331: closing socket (&{ws:0xc420116870 onMessage:0x6e6730 onClose:0x6e6780}): unexpected end of JSON input BTW.....Sorry for all the posts!! Looking at the logs saw something else that looked a tad strange....grabbed 7 series that were about 22GB In the logs I see this: I: 2017/12/17 09:44:41 planner.go:490: [143.32 MB] /mnt/disk4/media/anime/Denpa Onna to Seishun Otoko (2011)/./Ground Control To Psychoelectric Girl - Special 02 - The Nightmare Sun [1280x720 x264 AAC 2ch] [F327A5D6].mkv I: 2017/12/17 09:44:41 planner.go:493: --------------------------------------------------------- I: 2017/12/17 09:44:41 planner.go:494: I: 2017/12/17 09:44:41 planner.go:485: ========================================================= I: 2017/12/17 09:44:41 planner.go:486: disk(/mnt/cache):items(77)-(22.27 GB):currentFree(321.28 GB)-plannedFree(299.01 GB) I: 2017/12/17 09:44:41 planner.go:487: --------------------------------------------------------- I: 2017/12/17 09:44:41 planner.go:490: [343.12 MB] /mnt/disk2/media/anime/Chaos;Child (2017)/./Chaos;Child - 07 - Episode 7 [1280x720 x264 AAC 2ch].mkv I: 2017/12/17 09:44:41 planner.go:504: ========================================================= I: 2017/12/17 09:44:41 planner.go:505: Bytes To Transfer: 155.89 GB I: 2017/12/17 09:44:41 planner.go:506: --------------------------------------------------------- W: 2017/12/17 09:44:48 server.go:331: closing socket (&{ws:0xc420116240 onMessage:0x6e6730 onClose:0x6e6780}): unexpected end of JSON input Why does it say Bytes to Transfer is 155GB? when in the previous line is shows 22.27GB? Also what is it doing with the cache disk in that same line?....out of curosity Anything else i can test for ya! Let me know! Urlryn
  20. Attempting to merge a bunch of video files...from /mnt/disk3/media/anime (2TB free on this disk) to /mnt/disk2/media/anime clicking proceed...it flashes to a empty transfer page. Looking at the logs: I: 2017/12/16 19:37:41 planner.go:493: --------------------------------------------------------- I: 2017/12/16 19:37:41 planner.go:494: I: 2017/12/16 19:37:41 planner.go:504: ========================================================= I: 2017/12/16 19:37:41 planner.go:505: Bytes To Transfer: 315.27 GB I: 2017/12/16 19:37:41 planner.go:506: --------------------------------------------------------- W: 2017/12/16 19:37:48 server.go:331: closing socket (&{ws:0xc4201f81b0 onMessage:0x6e6730 onClose:0x6e6780}): unexpected end of JSON input I: 2017/12/16 19:37:48 core.go:158: Sending operation I: 2017/12/16 19:38:17 core.go:148: Sending config I: 2017/12/16 19:38:17 core.go:153: Sending state I: 2017/12/16 19:38:17 core.go:163: Sending storage I: 2017/12/16 19:38:18 core.go:171: Sending history I: 2017/12/16 20:01:14 core.go:148: Sending config Broke out the transfer into smaller groups (half of what was done previous) for test....would still happen. Then did even smaller groups (1/3 the size)...same thing Kept going down till i was doing 3-10 series and they would transfer fine. Seems something is up with total size.....20GB is max I can seem to move. Anything higher will generate the above issue. Issue 2 Gather > Select Folder > Choose Target drive > click Previous It never goes back and loads the screen. The 4 bars on the top right is showing activity but it never does anything. Refreshing the window is the only way to get back. Issue 3 Gather > Select Folder > Choose Target drive > Click on Gather again > Select folders > Click Next Same as above....never finishes loading the screen and the 4 bars show activity...but nothing happens. Urlryn
  21. Thanks SSD! I was pretty much one of the "one big disk" state of mind when I originally set my server up. Setup high water and let it go. Kicking myself for not cleaning this up sooner! I do appreciate the information! It makes a lot of sense and goes in line with what I was thinking when I asked the question. Urlryn
  22. Great! I'll read up on that! Should take care of the file transfers at least! Thanks Johnnie!
  23. I recently added 4 additional drives to my array and realize I have to re-org my media stuff. I have been noticing that my drives are not spinning down as much as they should be. After checking a bit more thoroughly...it looks like i'm one of the dummies that created a single "Media" folder with everything inside and did not setup the folder structure so that the split Levels would work correctly. So pretty much everything is spread out over the existing 4x drives. So when accessing 1 movie it will bring up 1-4 drives depending on where my stupid files are. So right now this is my structure: media > movies > movie folder > movie files media > kidsmovies > movie folder > movie files media > tvshows > season folder > season files media > anime > anime folder So I will be creating 3 new user shares. Setting each of the below shares with High Water. tvshows movies anime So once thats done I want to move the files to the new shares and get them redistributed correctly. What would be the best recommendation? Also what are the thoughts about assigning stuff to each disk? for example: Disk1/2 for anime only, Disk3/4 for movies only etc.... As for structure and split level...does the below sound correct for each share? tvshows > Archer > Season 1 > episodes files Split level 3 example: /mnt/disk2/tvshows/archer/season 1/all files /mnt/disk3/tvshows/archer/season 2/all files movies > kidsmovie > Lego Batman > movie files movies > HDMovies > John Wick > movie files movies > SDMovies > The Last Dragon > movie files Split level 2 Example: /mnt/disk1/movies/kidsmovies/Lego Batman/all files /mnt/disk2/movies/hdmovies/John Wick/all files anime > Initial D > episode/movie files Split level 2 example: /mnt/disk1/anime/Initial D/all files What i don't want is stuff like this (which is what they are right now): /mnt/disk1/media/tvshows/archer/season 1/archer.s01e01.mkv /mnt/disk2/media/tvshows/archer/season 1/archer.s01e02.mkv /mnt/disk3/media/tvshows/archer/season 1/fanart/poster.jpg Thanks Urlryn
  24. For the firewall...its my own hardware. Setup is: All PC connect to an Procurve GB switch > Firewall > Modem > Internet That was my first thought to be honest.....so I started off scouring the configuration and stuff on the firewall. But couldn't find anything, in the firewall itself, that was throttling or blocking the unraid server. The unraid box is the only one having issues with the download and speedtests. Guess i'll do more poking around in the firewall to see if maybe i missed something. If you have any suggestions....it be much appreciated!