leeknight1981

Can anyone help please? I am Unable to mount my 1TB SSD which is an unassigned drive, I have deleted the Preclear plugin, Unassigned devices plugin and Unassigned devices Plus plugin. i have my VM's stored on the SSD sometimes it works sometimes it doesn't and sometimes if i Reboot it works ok.... When i click mount it doesn't mount and nothing in the drive log its empty. Logs - Screenshot Attached TIA L33 libvirt.txt syslog.txt docker.txt

OK Squid attached is the Zip r720xd-diagnostics-20200305-1916.zip

i'll have to restart the server as Terminal just flashes when i start to type its gone then back then gone then back in the blink of an eye

Yeah sorry i worded it wrong that's what it does basically the same thing i am trying to get diagnostics but again i just get the bouncing wave. i have done as you asked but no different

Hi Squid Cheers for the swift reply tried that No Diff.... When i click on say Docker i get this Pic 1 the wave going up and down and then just cycles if i click docker again it goes to blank screen and again it loads the Dockers.... if i click check for updates it just says checking and doesn't change. Also noticed if i click MAIN the bottom doesnt load i cant see Stop Array or Move i have to click the MAIN button a few times and the Speed/Write toggle isnt there... Tried safari, Chrome, Brave Yet all ok on R710 running the same 6.7.2 on same network etc

Hi anyone know why when i click plugins i just get the wait symbol bouncing, And when i click check for updates on Docker it just says checking and does Nothing? i have restarted unraid etc. I have updated docker and plugins on my R710 fine on same network, same browser just a new tab both 6.7.2 both identical network settings bar server ip....

Hi anyone know why when i click plugins i just get the wait symbol bouncing, And when i click check for updates on Docker it just says checking and does Nothing? i have restarted unraid etc Regards L33

Where can i Donate Diaper funds ? Thanks For the Efforts you Put in

Out of interest how much work does it take to create a new version? Is there much to it? How many man hours? Keep Smiling

😁1 x ❤️

Anyone know WHEN the 6.8.1 is going to be out? I wont update till its out! Why is it so long after? 24 hours is acceptable not Dayzzzzzzzzz L33

Hi Guys i cant seem to find a definitive answer will the Dell 165T0 Broadcom 57800S Quad Port Network Card work with UnRAID? OR would the Mellanox MNPA19-XTR be a better choice? Ideally id like an on board card TIA L33

Was the Log's of any help? should it be stopping playback why Mover is Running ? Regards L33

Hi Squid I have put Plex log and Unraid Diagnostics in the Original if thats ok, I Hope iv done them Right. Also a photo of the error on TV why Mover is Running and trying to play Orange is the new Black. Sometimes i have no choice but to start the mover as my SSD is only 500GB but i will get a bigger next Pay date, but surely it should not prevent plex from playing? TIA L33 logging (1).zip r720xd-diagnostics-20190730-2121.zip

Squid please can i have your Biblical knowledge on this please, Not sure how else to get to you on here as im using my mob Hi Squid I have put Plex log and Unraid Diagnostics in, I Hope iv done them Right. Also a photo of the error on TV why Mover is Running and trying to play Orange is the new Black. Sometimes i have no choice but to start the mover as my SSD is only 500GB but i will get a bigger next Pay date, but surely it should not prevent plex from playing? TIA L33 r720xd-diagnostics-20190730-2121.zip logging (1).zip

OK so my cache drive is now full, And while the media is copying to the Array i am unable to watch Plex! Is this Right? I am sure i never had this issue with Single Parity!... What can i do? I am now unable to watch Plex while the Mover is Running!... Any help Would be Much Appreciated Also i get Parity 1 & 2 and Disk 6 are being read / write why the mover is moving! but why cant Plex read from other drives in the array? TIA L33

HI Thanks for the Reply, it is Turned on are the settings Wrong? Thanks

Guy's I am guessing this may be a very simple answer from someone, When moving Media from my Download Server R710 to my Plex Server R720XD it fills up the cache drive 500GB " I am going to buy a 2TB next month" Anyway when i click move the SSD read is 30MBs and Write is about the same on Parity 1 and Parity 2 and Disk 6. It used to be faster! Is it slower as i now have Dual Parity? I have the CA turbo on. Again this may be a silly question But when the mover is running Should Plex Grind to a STOP and say your connection to the server isn't fast enough. Im guessing its cos the drives are been read and written to etc. I Just wanted to check incase i can prevent it STOPPING Plex Playback. Normally i leave the mover to move at 03:00 when no one is watching. When i Replace the Cache with Bigger i guess i wont need to move in the Day± Many Thanks L33

Hi Guy's Can someone have a look at the screen dump iv added!? CA Backup Share Size 3.43 TB and the other share's Do they need to be that size? can they be made smaller. Do they need to be that size? Have had UnRaid for some time but my mate set it up for me a few years back! iv Since Upgraded to a Dell R720 XD with 2 x CPU E5-2667 v2 @ 3.30GHz, 64GB DDR3 1.3v 1333Mhz, and 2 x 8TB parity with 6 x 4TB data. I got it for next to Nothing Anyways iv set everything else up and am just unsure if the Share's / CA Backup should be that size and or if it can be changed. PS i do weekly CA Backup i then Zip them and upload them to G-Drive after 4 weeks i delete the previous 4 backups TIA L33

Hi Guy's after having a few issues I just need some clarification, All my docker containers are stored on an SSD / the cache drive like this /mnt/user/appdata/letsencrypt/ /mnt/user/appdata/organizr/ CA Backups is set to /mnt/user/CA Backups/appdatabackup /mnt/user/CA Backups/flashdrivevbackup/ /mnt/user/CA Backups/libvirt backup/ So unless I am wrong the backup is backed up to the SSD / Cache? So if said SSD / cache was to fail / die id be FUBAR and lose all my dockers etc so do I manually move the backups or do I set them to a folder on the share / array TIA please forgive my terminology its been a really long 2 days and I haven't the time to investigate Regards L33

Hi guy's I have come across this Post as i have just purchased a Dell R720 XD 12 x 3.5" with 2 x Intel Xeon E5-2667v2 3.3GHz Eight-Core in it and luckily the H310 RAID card i currently have a 24TB array 2 x 8TB and 4 x 4TB will this just go straight into the R720 once iv set the BIOS etc up, If i put the drives back in order will it all be ok? Iv never moved UnRaid outta 1 box into another! Many Thanks L33

Out of curiosity i created another Music library and called it Music - MP3 i pointed it to an empty folder in Plex folder, I then tried to delete said library but it will not delete the same as the normal one. Nothing in the folder at all was a brand new folder. So i now have Music and Music - MP3 library's that i am unable to remove from the sidebar! The Plex dev's can be arrogant bastards at times so i don't wanna go to them unless i Really have to. Anyone have any ideas on this before i F&CK Plex off for Emby. TIA L33

Awesome I am away for the bank holiday weekend so I’ll check when I get back, I know the last folder I dropped before the issue was Genesis and the time before it was Genesis so I’ll have to go threw all of them! If left it would plex sort it or will it just keep stalling many thanks who do I buy a burgundy XD