alturismo

well, my mount points are physically on the same drive, as example, a cut and paste from a 50 gig file takes 1 second in file explorer, a move here takes a little until its copied and then deleted ... i agree when its physically different drives, but i assume thats how filebot works nvm, just would be alot nicer ...

hehe, wasnt that hard, just worked out ... now i just have to figure how to get the guacamole working behind the reverse proxy thanks

Hi, may a question about the jdownloader2 docker, if i would like to use a separate guacamole to connect to the jdown server instead the buildin one, is that possible ? couldnt find any rdp listen port inside the jdown settings or any addon allowing the rdp ... would be nicer to have more together in one place ... thanks ahead

Hi again, got it sorted so far and is a really nice tool when u know what u doing keep original i couldnt figure out, but nevermind, renaming is ok now may one question though, is filebot renaming and moving ? to me it looks more like copy to new location with new name and the delete the original files ? just wondering cause its using double diskusage ... i changed in .sh to "--action move" ... still looking to me it would copy and delete ...

Thanks, worked out ... wondered me a little cause i thought i made that before and had errors on my vm´s when trying to start them, must been a failure by me ... working actually a little better now when the gaming vm is in use so the other can be used a little better ...

may a small question, if i would like to test performance with isolcpu in syslinux, how would i add the line in case i already use an append for INTEL audio passthrough ? currenty it looks like this label unRAID OS menu default kernel /bzimage append vfio-pci.ids=8086:a170 modprobe.blacklist=i2c_i801,i2c_smbus initrd=/bzroot can i just add the isol append command ? thanks ahead

udated too fast to 6.3.1 without checking new dvb available possible to boot with 6.3.0 dvb kernel ? thanks ahead ?

Hello, i have some question about filebot and what is possible to change via the config. 1. output folders, looks hardcoded to "Movies" and "TV Shows", possible to change these in the config ? or may possible to use "links" if thats easier ? 2. Movies dont have an directory, possible to change so it would end like /Movies/Movienamehere/movie.mkv as example ? 3. well, dont rename anything, just move to the recognized output like a movie to /Movies, a episode to /TV Shows/name/season/ ... thanks ahead for any hints

That's because you edit the wrong file. The one to edit is /etc/services.d/tvheadend/run. That should stick until you update. There might come an option to set this as an variable some time in the future. Hi, just would like to ask if thats correct what i did before i broke something bigger ... SSH login docker cp tvheadend:/etc/services.d/tvheadend/run /root edit the file by adding this entry to the end --http_root /tvheadend docker cp run tvheadend:/etc/services.d/tvheadend/run Restart seems the /tvheadend behind the proxy is working now, but also the direct connection ... wich is ok to me just would like to know if thats correct ? thanks ahead That sounds correct. great, after TVH docker update today its gone, but easy to add now

That's because you edit the wrong file. The one to edit is /etc/services.d/tvheadend/run. That should stick until you update. There might come an option to set this as an variable some time in the future. Hi, just would like to ask if thats correct what i did before i broke something bigger ... SSH login docker cp tvheadend:/etc/services.d/tvheadend/run /root edit the file by adding this entry to the end --http_root /tvheadend docker cp run tvheadend:/etc/services.d/tvheadend/run Restart seems the /tvheadend behind the proxy is working now, but also the direct connection ... wich is ok to me just would like to know if thats correct ? thanks ahead

I did cmd powercfg -h Off Guess thats also a solution.

I guess thats my answer, thanks ?

I see, only some seperate patches to add dvbc support, may an idea where to ask to add them if they work ?

I think my vms booting now, installed quemu-gax64.msi, may try that.

same issue here, always 1st boot stops, 2nd boot just runs fine through .... same behavior on 2 win10 VM´s here, 1 intel passthrough, 1 Nvidia passthrough. Example Nvidia 2017-01-20 05:19:55.026+0000: starting up libvirt version: 2.4.0, qemu version: 2.7.0, hostname: AlsServer LC_ALL=C PATH=/bin:/sbin:/usr/bin:/usr/sbin HOME=/ QEMU_AUDIO_DRV=none /usr/local/sbin/qemu -name guest=AlsMedia,debug-threads=on -S -object secret,id=masterKey0,format=raw,file=/var/lib/libvirt/qemu/domain-10-AlsMedia/master-key.aes -machine pc-i440fx-2.7,accel=kvm,usb=off,dump-guest-core=off,mem-merge=off -cpu host,hv_time,hv_relaxed,hv_vapic,hv_spinlocks=0x1fff,hv_vendor_id=none -drive file=/usr/share/qemu/ovmf-x64/OVMF_CODE-pure-efi.fd,if=pflash,format=raw,unit=0,readonly=on -drive file=/etc/libvirt/qemu/nvram/eba4c457-6ff8-72c0-1fc3-55bb6a5c67a9_VARS-pure-efi.fd,if=pflash,format=raw,unit=1 -m 8192 -realtime mlock=off -smp 2,sockets=1,cores=2,threads=1 -uuid eba4c457-6ff8-72c0-1fc3-55bb6a5c67a9 -display none -no-user-config -nodefaults -chardev socket,id=charmonitor,path=/var/lib/libvirt/qemu/domain-10-AlsMedia/monitor.sock,server,nowait -mon chardev=charmonitor,id=monitor,mode=control -rtc base=localtime -no-hpet -no-shutdown -boot strict=on -device nec-usb-xhci,id=usb,=3,hostaddr=10,id=hostdev4,bus=usb.0,port=3 -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x8 -msg timestamp=on Domain id=10 is tainted: high-privileges Domain id=10 is tainted: host-cpu char device redirected to /dev/pts/1 (label charserial0) 2017-01-20T05:20:19.897469Z qemu-system-x86_64: terminating on signal 15 from pid 4559 2017-01-20 05:20:22.121+0000: shutting down, reason=shutdown

Hi, wanted to ask if here is may a solution with my twin tuner DVB Cards i have two hauppage WinTV-HVR-5500, a DVB C, S, S2, ... card. in UNRaid DVB the cards are shown like this DVB Kernel: Detected DVB Adapter Drivers: Detected DVB Adapter 0: NXP TDA10071 DVB Adapter 1: Silicon Labs Si2165 DVB-T DVB-C DVB Adapter 2: NXP TDA10071 DVB Adapter 3: Silicon Labs Si2165 DVB-T DVB-C so i assume adapter 0+1 = card 1, adapter 2+3 = card 2. adapter 0+2 (DVB S) are working fine, adapter 1 + 3 (DVB C) are not working properly, recognized in TVH, i can config them and so on, but scanning always fail like this 2017-01-13 06:46:35.408 mpegts: 114MHz in DVB-C Netzwerk - tuning on Silicon Labs Si2165 DVB-T DVB-C : DVB-C #0 2017-01-13 06:46:35.408 subscription: 01BB: "scan" subscribing to mux "114MHz", weight: 6, adapter: "Silicon Labs Si2165 DVB-T DVB-C : DVB-C #0", network: "DVB-C Netzwerk", service: "Raw PID Subscription" 2017-01-13 06:46:35.471 linuxdvb: Unable to provide signal strength value. 2017-01-13 06:46:35.471 linuxdvb: Unable to provide BER value. 2017-01-13 06:46:35.471 linuxdvb: Unable to provide SNR value. 2017-01-13 06:46:35.471 linuxdvb: Unable to provide UNC value. 2017-01-13 06:46:40.408 mpegts: 114MHz in DVB-C Netzwerk - scan no data, failed 2017-01-13 06:46:40.408 subscription: 01BB: "scan" unsubscribing 2017-01-13 06:46:40.408 mpegts: 130MHz in DVB-C Netzwerk - tuning on Silicon Labs Si2165 DVB-T DVB-C : DVB-C #0 2017-01-13 06:46:40.408 subscription: 01BD: "scan" subscribing to mux "130MHz", weight: 6, adapter: "Silicon Labs Si2165 DVB-T DVB-C : DVB-C #0", network: "DVB-C Netzwerk", service: "Raw PID Subscription" 2017-01-13 06:46:45.408 mpegts: 130MHz in DVB-C Netzwerk - scan no data, failed 2017-01-13 06:46:45.408 subscription: 01BD: "scan" unsubscribing ... from the system log in unraid Jan 13 06:46:26 AlsServer kernel: cx23885 0000:05:00.0: Direct firmware load for dvb-demod-si2165.fw failed with error -2 Jan 13 06:46:26 AlsServer kernel: i2c i2c-4: si2165: firmware file 'dvb-demod-si2165.fw' not found i assume its about the twin tuners not accepted correctly or some config ? both cards worked before nice on Windows using Mediaportal as Backend, but as im testing here on unraid now and really like it i try figuring what could be the reason .. DVB-S all nice as it should, also with SAT-IP server etc etc ... may an idea ? any more infos needed to investigate ?

thanks for the info, i didnt recognize if thats the point to get it running behind a proxy, the file /etc/services.d/tvheadend/run is inside the docker ? so i have to run the docker and then "docker exec ..." ? root@AlsServer:~# cd /etc root@AlsServer:/etc# cd /services.d -bash: cd: /services.d: No such file or directory root@AlsServer:/etc# docker exec -ti apache bash root@AlsServer:/# cd /etc/services.d bash: cd: /etc/services.d: No such file or directory root@AlsServer:/# thanks ahead

just as small update here with DVB-C adapter, found another small USB adapter and its working fine, so looks like a driver issue with my twin tuners card, may a hint where to ask about this issue ? using LibreELEC DVB Edition as described before. and may someone here knows howto get this TVH version running behind apache reverse proxy, seems there has been changes from 4.09 to here, i guess the HTTP CORS Origin: could be helpful ? ... thanks ahead for an tip.

Update here worked fine, no Data loss ..

Hi, may here someone has an idea why my twin tuner card may doesnt work properly i have two hauppage WinTV-HVR-5500, a DVB C, S, S2, ... card. in UNRaid DVB the cards are shown like this DVB Kernel: Detected DVB Adapter Drivers: Detected DVB Adapter 0: NXP TDA10071 DVB Adapter 1: Silicon Labs Si2165 DVB-T DVB-C DVB Adapter 2: NXP TDA10071 DVB Adapter 3: Silicon Labs Si2165 DVB-T DVB-C so i assume adapter 0+1 = card 1, adapter 2+3 = card 2. adapter 0+2 (DVB S) are working fine, adapter 1 + 3 (DVB C) are not working properly, recognized in TVH, i can config them and so on, but scanning always fail like this 2017-01-13 06:46:35.408 mpegts: 114MHz in DVB-C Netzwerk - tuning on Silicon Labs Si2165 DVB-T DVB-C : DVB-C #0 2017-01-13 06:46:35.408 subscription: 01BB: "scan" subscribing to mux "114MHz", weight: 6, adapter: "Silicon Labs Si2165 DVB-T DVB-C : DVB-C #0", network: "DVB-C Netzwerk", service: "Raw PID Subscription" 2017-01-13 06:46:35.471 linuxdvb: Unable to provide signal strength value. 2017-01-13 06:46:35.471 linuxdvb: Unable to provide BER value. 2017-01-13 06:46:35.471 linuxdvb: Unable to provide SNR value. 2017-01-13 06:46:35.471 linuxdvb: Unable to provide UNC value. 2017-01-13 06:46:40.408 mpegts: 114MHz in DVB-C Netzwerk - scan no data, failed 2017-01-13 06:46:40.408 subscription: 01BB: "scan" unsubscribing 2017-01-13 06:46:40.408 mpegts: 130MHz in DVB-C Netzwerk - tuning on Silicon Labs Si2165 DVB-T DVB-C : DVB-C #0 2017-01-13 06:46:40.408 subscription: 01BD: "scan" subscribing to mux "130MHz", weight: 6, adapter: "Silicon Labs Si2165 DVB-T DVB-C : DVB-C #0", network: "DVB-C Netzwerk", service: "Raw PID Subscription" 2017-01-13 06:46:45.408 mpegts: 130MHz in DVB-C Netzwerk - scan no data, failed 2017-01-13 06:46:45.408 subscription: 01BD: "scan" unsubscribing ... from the system log in unraid Jan 13 06:46:26 AlsServer kernel: cx23885 0000:05:00.0: Direct firmware load for dvb-demod-si2165.fw failed with error -2 Jan 13 06:46:26 AlsServer kernel: i2c i2c-4: si2165: firmware file 'dvb-demod-si2165.fw' not found i assume its about the twin tuners not accepted correctly or some config ? both cards worked before nice on Windows using Mediaportal as Backend, but as im testing here on unraid now and really like it i try figuring what could be the reason .. DVB-S all nice as it should, also with SAT-IP server etc etc ... may an idea ? any more infos needed to investigate ?

i use pci devices, sadly cant get the DVB-C to work, DVB-S seems to work fine, may i need to try a different DVB version from unraid, i saw there are different DVB versions available with probably different drivers ... thanks again for the advice, i ll try to get DVB-C working and my other unraid issues i still have im new to this but seems to be a nice thing when i get all sorted. Edit, may an idea why dvb-c aint working 2016-12-28 23:17:44.002 mpegts: 114MHz in KDG - tuning on Silicon Labs Si2165 DVB-T DVB-C : DVB-C #0 2016-12-28 23:17:44.002 opentv-skyuk: registering mux 114MHz in KDG 2016-12-28 23:17:44.008 subscription: 0113: "keep" subscribing to mux "114MHz", weight: 1, adapter: "Silicon Labs Si2165 DVB-T DVB-C : DVB-C #0", network: "KDG", service: "Raw PID Subscription" 2016-12-28 23:17:44.008 mpegts: Silicon Labs Si2165 DVB-T DVB-C : DVB-C #0 - Silicon Labs Si2165 DVB-T DVB-C : DVB-C #0 - linked input cannot be started (All: 0) 2016-12-28 23:17:44.008 subscription: 0112: "scan" subscribing to mux "114MHz", weight: 5, adapter: "Silicon Labs Si2165 DVB-T DVB-C : DVB-C #0", network: "KDG", service: "Raw PID Subscription" 2016-12-28 23:17:49.000 mpegts: 114MHz in KDG - scan no data, failed 2016-12-28 23:17:49.000 subscription: 0112: "scan" unsubscribing 2016-12-28 23:17:49.000 subscription: 0113: "keep" unsubscribing 2016-12-28 23:17:54.017 mpegts: 11288V in SAT scan complete 2016-12-28 23:17:54.017 subscription: 0110: "scan" unsubscribing

Advanced view please. replaced the pics You haven't changed the parameter in the extra parameters box from the default one. If you have a USB or pcie dvb adapter, change it to the below. --device=/dev/dvb If you are using IPTV or hdhomerun, remove everything in the box. thanks alot

Advanced view please. replaced the pics

here are the screenshots

Hello, trying to install TVHeadend Server on my new unraid server, sadly getting following error. Command: root@localhost:# /usr/local/emhttp/plugins/dynamix.docker.manager/scripts/docker run -d --name="binhex-tvheadend" --net="host" -e TZ="Europe/Berlin" -e HOST_OS="unRAID" -e "TCP_PORT_9981"="9981" -e "TCP_PORT_9982"="9982" -e "PUID"="99" -e "PGID"="100" -v "/mnt/cache/appdata/data":"/data":rw -v "/mnt/user/appdata/binhex-tvheadend":"/config":rw --device=/dev/tuner type binhex/arch-tvheadend Unable to find image 'type:latest' locally Pulling repository docker.io/library/type /usr/bin/docker: Error: image library/type:latest not found. See '/usr/bin/docker run --help'. The command failed. on 1st install all downloads looked ok, Docker didnt show up in docker list, now when i try to add it again i get upper shown messages. when i check the tvheadend share i see some files written there ... may an tipp what i ve done wrong ?