etsi

Members
  • Posts

    74
  • Joined

  • Last visited

Everything posted by etsi

  1. Something causes du -sb /mnt/disk1/shared-folder to run. How can I find what starts this command? It slows down unraid because it has a lot of files in that folder.
  2. If I use SSDs to create ZFS raidz there will be no problem with trim right?
  3. It will degrade at a point that I will have to rebuilt the array? If I use a single pool ssd trim will work? If I use zfs with two ssd disk trim will work? Thanks
  4. If I use ssd disk/nvme's as an array will be a problem if trim isn't working? It will still be much faster than mechanical disks? Or I could use one ssd as a pool then trim will work? I will backup everything anyway. I want to built something small easy to handle because as a disabled person it isn't easy to built or handle a pc
  5. Is it possible to install unraid in a mini pc and use an external disk via usb? It should work without using a parity without problems? If I use and a parity disk it will might not work ? Also does unraid support nvme/ssd disks? If I use them for an array?
  6. Is it possible to create an array only with ssd disks?
  7. I was thinking too use 12100 or 12400. Is the much difference in power draw?
  8. After upgrade I had to change dockers with network type from bridge to host, otherwise it replaced with an 172.* ip address. Dockers with custom ip didn't change. Ipvlan is only for those with two network cards in bridge?
  9. Hi, everyone! Is this video still valid to shrink an array ? I have 3 disks and want to remove 1.
  10. I just run a few dockers, I won't use much VM's only for testing or a Linux VM. Only for backup and sometimes I play videos direct from the server. What CPU would you suggest to use, low Tdp, low idle power?
  11. Hello, is there a way to upgrade from 3 hdd's to 2 hdd's in larger sizes?
  12. So maybe the problem is the low performance of the drivers that are very old. Because I want to upgrade the disks I will try that first on N36L and if it's still slow I will upgrade the system.
  13. Single large file. Can I transfer the disks and the flash drive to another system and upgrade like that easily? I can find a system with i5-2300 CPU.
  14. About 25-30 mb/sec.
  15. N36L isn't enough powerful for unraid? Running iperf I get gigabit speeds but disks are slow. Using the disks without unraid I can read/write 100mb/sec. zeus-diagnostics-20230521-1704.zip
  16. I set a root password via ssh but after rebooting the password is blank again. Ho to change the root password permanently?
  17. If someone never had a root password just log in via ssh as root without password and set a root password, that worked.
  18. Hello, I just ugraded and I have to enter username and password, which I never had, please help
  19. I have the same question. I wonder how to use LAN IP for each docker like it works on unraid.
  20. Do I have to reinstall the plugin after every reboot?
  21. etsi

    SNMP

    I found only this one: Adds Slackware's SNMP package to unRAID. This allows users to get CPU utilization, RAM usage, disk activity, and more via the SNMP protocol. Also includes HDD- and unRAID share-related scripts created by Coppit. But it has a comment "Due to how this plugin is currently designed, it requires a reinstall whenever you reboot your server". I really do not want to reinstall after every reboot.
  22. etsi

    SNMP

    Hello, Where is SNMP settings ? How can I enable it?
  23. Thank you zeus-diagnostics-20200216-1214.zip
  24. Hello, I got a warning , Warning [] - current pending sector is 1, Unraid Disk 2 SMART health [197]: Warning [ZEUS] - current pending sector is 1 WDC_xxxxx (sdd) Unraid array errors:Warning [ZEUS] - array has errors Array has 1 disk with read errors. I received one more mail warning : Disk 2 - WDC_xxxxx(sdd) (errors 5). Is it one or five errors? I run SMART extended --> Completed without error, and Parity check finished (0 errors). There is one warning in attributes section : 197Current pending sector 0x0032200200000Old age Always Never 1 The hard disk is too old, should I replace it immediately ? How can I make sure if hard disk is ok or not? Thank you
  25. Thanks this worked for my synology share but I can't add nvidia shield share again. It doesn't load the list of shares to choose and I can't just add it empty. Thanks I had to actually type by hand the name share. I didn't know I could type share name because the field was in gray color. My bad. All ok.