etsi

Thanks this worked for my synology share but I can't add nvidia shield share again. It doesn't load the list of shares to choose and I can't just add it empty. Thanks I had to actually type by hand the name share. I didn't know I could type share name because the field was in gray color. My bad. All ok.

After upgrading to latest unraid version I get errors: It worked before I upgrade . Any ideas? Thank you Jan 20 14:10:48 zeus kernel: CIFS VFS: cifs_mount failed w/return code = -13 Jan 20 14:10:48 zeus unassigned.devices: Mount of '//xxxx/xxx' failed. Error message: 'mount error(13): Permission denied Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) and kernel log messages (dmesg

Download of appfeed failed. Community Applications requires your server to have internet access. The most common cause of this failure is a failure to resolve DNS addresses. You can try and reset your modem and router to fix this issue, or set static DNS addresses (Settings - Network Settings) of 8.8.8.8 and 8.8.4.4 and try again.

Can't start the docker anymore, Execution error Bad parameter. Re installed and works now. Only set manual update for this docker.

I have problems too, it's useless and can't trust it for dns service.

After latest update openvpn server no longer works. I tried to delete it and clean the image files but still I can't connect to web admin it doesn't connect at all.

Why it fails with some files due to permissions? I can't make a full 100% working backup. I can read all the files from a share or from terminal.

Can you please update borg backup to the latest version 1.1.5?

This docker, the Linux version of cloud berry can backup unlimited size of data? Because there are some limits I think for the widows version of cloud berry.

Using --modify-window=5 fixed my problem. There is always 1 second difference timestamp between source and target files. The remote samba share is a wdtv media player but also I have a problem with QNAP samba share.

There is a strange problem when I mount a remote samba share. When I run rsync ( rsync -avzP --delete /mnt/user/tv/ /mnt/disks/10.0.0.120_500GB-2.5/tv ) it copies every time the same files that already exist on that share. I have different rsync parameters but nothing works. I haven't encountered such a problem running rsync in general other than using unassigned devices plugin with a samba shared folder. I would appreciate if you have any ideas what I'm doing wrong.

Thanks. 540 108 Watts 20%

Same ups, same problem.

1. I tried to mount the dead samba share using the plugin. 2. Web gui freezes forever. 3. I manually killed the mount process is running from the plugin. 4. Web gui works again

After this log entry Oct 20 14:14:49 Remote SMB mount '//10.0.0.120/500GB-2.5' is not set to auto mount and will not be mounted... I try to mount the above problematic samba share and there is nothing logged, the web gui hangs and I have to reboot unraid. After rebooting I clicked the log icon and has the following info Oct 20 14:14:49 Remote SMB mount '//10.0.0.120/500GB-2.5' is not set to auto mount and will not be mounted... Oct 20 14:42:12 Mount SMB/NFS command: mount -t cifs -o rw,nounix,iocharset=utf8,_netdev,file_mode=0777,dir_mode=0777,username=guest,password=******* '//10.0.0.120/500GB-2.5' '/mnt/disks/10.0.0.120_500GB-2.5' Oct 20 14:42:12 Mount of '//10.0.0.120/500GB-2.5' failed. Error message: mount error(112): Host is down It added information in log file when I rebooted unraid. For almost half an hour web gui was not responsive. Isn't there any timeout value ?

Yes the share is auto mounted. In syslog I can only see Oct 18 14:37:36 unassigned.devices: Mounting 'Auto Mount' Devices... In cat unassigned.devices.log there is nothing about the host of the share that is not responding only another share one that is mounted and working. I think I will try to turn off auto mount.

Unraid 6.3.5. Do I have to specify an option somewhere because there is almost nothing in unassigned.devices.log. I had to remove the share via the config file because web gui was not working.

I have a problem when the plugin tried to mount a samba share that for some reason is not responding or it's down. The whole web gui hangs for ever. Is there any way if the samba share times out to stop trying to mount it or whatever the plugin is down and makes the web gui unresponsive? Thanks

Not sure. Was this happening on 1.0.11? borg -V borg 1.0.11

When I run borg the following appears: "Using a pure-python msgpack! This will result in lower performance."

I have Start APC UPS Daemon set to no, UPS cable set to custom, Custom UPS Cable set blank and UPS Type set to dumb. You might try starting and stopping APC UPS too. Thanks! Using the above settings it worked (apcupsd[31937]: apcupsd shutdown succeeded).

When using nut how we disable the internal UPS function of unraid ? It's turned off but I get spam of Communications with UPS lost messages in log file. NUT communicates just fine. - UPS settings in unraid UPS Status Lost communication , Start APC UPS daemon: NO - NUT settings UPS status online

I'll take a look. However there's no pre built package or slack build that I could find. So it may be a while till I have time. Have you tried borg backup? Thanks I will try borg.

Can you add restic? https://github.com/restic/restic

Next version of unraid will support separate ip for each docker and will solve that problem?