ich777

Please always quote me or at least mention me because otherwise I will miss your response and I've only seen by accident that you've answered. This is tough... I would really recommend that you check their EULA because otherwise you are on thin ice... Definitely not... I know, Debian also has them enabled but the main difference is that these Distros are in most cases used for Desktop usage and not in the case like for Unraid as a Server OS. I completely get your point and what you are trying to accomplish but I'm not entirely sure if the antivirus should run on the server itself because Unraid is not a general purpose server. Is there maybe a Docker container for this application out there?

Are you on the latest BIOS? Can you maybe contact the manufacturer about that, this is something that I can't fix. As said above this is most certainly a bug in your BIOS. In which PCIe slot do you have the card installed? Have you yet tried to boot into Legacy Mode? EDIT: Wait, now that I see it, this is a mobile T400 chip, what card is this exactly. I'm not 100% sure if the default Nvidia driver supports mobile chips and even if it does it seems that you need a modified driver for this card because Nvidia is most certainly not selling PCIe GPUs with mobile chips.

Sorry I can't reproduce this on my system, everything is running just fine. Anyways, I've pushed an update to the container, please update it and see if it fixes the error.

I will look into that and report back.

This is most certainly caused by a bug in your BIOS, have you yet checked if you are on the latest BIOS version? Why do you have created the nvidia.conf file in your modprobe.d folder: options nvidia NVreg_OpenRmEnableUnsupportedGpus=1 you even don't run the open source driver. Try to boot with CSM (Legacy Mode) and see if that solves the issue but most certainly this is a bug in your BIOS. Also make sure that you've enabled Above 4G Decoding and Resizable BAR Support in your BIOS.

Have you yet tried to disable torrent for a bit and see if this causes your issues since libtorrent is know to crash systems (not only Unraid).

But what about the other people with the same hardware (at least motherboard and cpu) out there which have zero issues. No and no.

Are you sire that this isn‘t a hardware fault?

Please report that as an issue over here on GitHub since I've only made the plugin for Unraid.

AFAIK yes, I've never done a cluster before since it's not my use case and ARK isn't my game anyways... Try to look at the second recommended post in this thread (on the very top from this thread), maybe Cyd can help you out or another user which has set up a cluster before.

Möglich, ich bin nicht wirklich ein Stromsparer, zumindest nicht in dem Ausmaß wie ihr es hier betreibt... Ich vermute mal du benutzt Intel-GPU-TOP, wenn ja, gib doch bitte auch gleich die ganzen Zeilen für deine iGPU auch raus, vor allem hast die 2x drin, es sollte dann ca so aussehen: #!/bin/bash # Start the Management Utility /usr/local/sbin/emhttp &

Sorry I really can't help with that limited information, where do you see the error that you've posted in your previous post?

Sorry, da hab ich mich wohl falsch ausgedrück, das go file nicht ändern und das Plugin nicht installieren. Das Plugin ist nur für USB NICs, das bringt in deinem Fall nichts.

TBS Driver Update:

First of all, please disable validate! Are you sure that you've updated the server list in your in game server browser? I've now tried it and have no issue and displays the double cross icon right next to the key icon like mentioned in this post here: Are you sure that nothing is blocking the incoming connection to PlayFab itself? This shouldn't be necessary at all because the users had issues that the server is even showing up. Try it in default bridge mode instead. What you can also try is to set another server name without any special characters. Have you yet tried the default template (without changing anything) with the parameter -crossplay added?

Was ist das (ist schon klar ein NIC)? Link? Realtek ist dafür bekannt, speziell mit neueren Chips aber auch mit älteren immer ein wenig hinterherzuhinken mit den Treibern für Linux für neuere Kernel versionen und auch mit der Qulität der Treiber (2.5Gbit/s In-Tree-Treiber sind sowieso mehr schlecht als recht). Ich hab schon ein Plugin released (für deren USB NICs) das auch ein third party maintainer über hat der die Treiber immer wieder für neue Kernel Versionen anpasst da sie es nicht gebacken bekommen.

Did you add the line to the go file and tried it in the first place?

You don't have to do anything of this usually... Did something change on your Dashboard or do you now see the IMC utilization? Usually this options are only needed if you want to enable Intel Low Power encoding but I don't recommend that since it reduces the quality too. Now that I'm on my PC I recognize you, good content that you produce...

Realtek in general are not the best when it comes to Linux and they are always behind with their drivers and not everything is working properly or better speaking not at full speed most of the times. Is your USB NIC et0 (you can see that in the GUI), if yes then open up a terminal and execute this command: ethtool -s eth0 autoneg on advertise 0x80000000002f if not you have to change eth0 from the above command, with this you would be able to try the driver if it is working properly for you and your specific adapter.

Please post your Diagnostics, what NIC are you using exactly? The go file is located at /boot/config/ but I don‘t recommend editing the file if you don‘t know what you are doing… This plugin is only meant for advanced users and if you are experiencing issues with the built in driver.

Is your iGPU actually used by something? If not values with zeros (0) aren‘t nothing because if nothing is using your iGPU it won‘t display anything higher than zero.

Next time this happens, simply remove the nvidia-driver.plg file and the nvidia-driver folder from /boot/config/plugins directory, reboot your server and install it again from the CA App.

This is most likely a really weird coincidence of some sort. I couldn‘t imagine why your PC from ehich you‘ve started the installation would crash.

Please only forward the ports from the template, all other ports that you are listed are not required, one reason behind this is because if the ports are not forwarded in the template they don't do anything and are a security risk! The ports which are recommended that you find online on various sites are just automatic generated values that are most of the times wrong. I would recommend that you also ask your ISP if he doesn't block ports in the high regions, some ISPs even block UDP traffic. Users from outside your network are also not able to join then? Please also double check your port forwarding.

Please post your Diagnostics. It would be really interesting why it crashed. Remove the Plugin again, reboot and then install it again to solve the issues that you have above. But I really would recommend that you post your Diagnostics first so that I can look into it why it crashed so that this doesn‘t happen again.