ich777

How did you create that file? Did you create a txt file and renamed it to cfg, are you really sure that the extension is cfg and not txt (Windows hides by default the file extensions). With which program did you create that file? Some programs mess up the formatting of the file (not visible by you usually) for example Word Pad or the default Text Editor from OSX do these kind of things. Please double check that you've created it in this format: ownerid 78912345678912345 "SchwiftyRick" Also please make sure that you first stop the server before editing any files from the container and after you've edited/created and saved them start the container again.

I think this part should not be in there or am I wrong? No it isn‘t but Firewire is now part of Unraid.

Yes. Sorry for the late response, didn‘t see it in time…

I have many people having issues with using GTX 1600 series cards which fall from the bus for no reason or simply wont work at all. Then pick a T600 it has 4GB of VRAM A T400 is more than capable of 3 simultaneous streams if we are not talkig about 4K HFR… I can transcode 3x 4K streams without any issue on my T400 BTW the T400, T600 & T1000 uses the same NVENC chip as the GTX 1600 series. Also keep in mind for transcoding you don‘t need a powerhouse of a graphics card anyways. Even my Intel i5-10600 is capable of 4+ 4K transcodes at once with QuickSync and only uses a fraction of the power what you would need with a Nvidia card.

This has nothing to do with the driver, this is a known Plex issue if you are using the web client, however the mobile apps should all just work fine. For example if you set the global streaming quality in your LAN to something lower than the source it will also work in the web clients. This was also discussed earlier in this thread (about one or two years ago someone reported that to me), Plex has a lot of issues currently with it's transcoder. I also read somewhere that the 8Mbit/s setting is also broken on Intel QSV transcoding but can't remember what the exact issue was <- read that somewhere on the German sub forums.

Maybe the card is bad or something else wrong with the hardware? Have you read the second post of this thread and added everything to the container that is necessary for transcoding? I have now a few people which confirmed it working with the driver, see this post:

Tesla cards are working OOB with this Plugin.

I would recommend that you open up a issue over here: Click with the Diagnostics attached and the post from above linked. I think the TS-470+ has another chip in it but I could be very wrong about that. Happy New Year! 🎇🍾🧨🧯

Please post your full Diagnostics.

Again, this seems not like a driver issue to me because you are one out of many people which have the driver installed and nobody else has such an issue with the driver. For everybody else it seems to be working or my thread would get spammed with support requests: (these are the downloads from the individual driver packages for Unraid 6.11.5) You have to at least see my point of view that so many people have installed the drivers and non of them have an issue like you. Or better put it that way, if you have Unraid 6.11.5 installed with the driver 525.60.13 and someone else have the exact same system and the same driver installed you are both using the exact same package and nothing is different. As said before, the drivers are pre compiled, compressed to a package which is downloaded by the plugin and ultimately installed on your system. But maybe there is some issue now with the memory now or it died in the last week, I really can't tell what changed in the last week on your system, maybe there was some other kind of update or the card really died,... Sorry, but there is nothing more I can do about that, I also know a few people which using Unraid and the plugin with for example a 1050, 1050ti, 3060, 3080ti and non of them has an issue with it.

Yes, the plugin is issuing this command each reboot and also if the plugin gets updated. Otherwise your pools wouldn't get imported, at least not on pre Unraid 6.11 @1WayJonny what's your exact issue with that command or why do you think it's bad? This command only makes sure that the pools or better speaking disks which are connected to your system and have pools on them are imported/mounted. If a pool/disk for example is connected to your system but not imported/mounted this command is only importing/mounting them, all existing pools stay imported/mounted and are not touched. Imported simply means mounted in terms of ZFS.

This only applies to manual overclocking and not factory overclocking. Not on Unraid, as said above this only applies to manual overclocking. No manufacturer would sell a card which is OOB unstable to a user, think only about the RMAs that such a manufacturer which sells unstable cards OOB would get... I thought this was a new card or at least that you've had it installed somewhere and you are validated that it is working properly? I don't recommend getting a P2000 because this is nowadays the most uneconomical card that you can buy and it happened to already a few people here in the support thread which bought a P2000 second hand that died on them in a couple of months or even days. I would rather recommend that you buy something like a Nvidia T400, T600 or T1000. You can get a T400 for about 100,- brand new, this card doesn't need external power, has a maximum TDP of 35W and is Turing based. In terms of transcoding it can do the same as your 1070, 3 simultaneous transcodes.

You have to change „plex“ to the exact name of your Plex container. Again, I would recommend that you post on the official support thread for Plex because when it is working for you with other containers this is purely a Plex issue.

Bitte poste die Ausgabe von docker run Ich wüsste nicht was ich fixen soll, bei mir läuft er einwandfrei. Dann sind vermutlich die Ports doppelt belegt, das ist aber nur eine Vermutung, hast du denn zwei container die beispielsweise beide Port 8080 belegen? Falls ja ändere einen davon.

If Handbrake is running just fine and every transcode is working fine this seems more like a Plex issue to me and I would strongly recommend that you report that over on the Plex support thread. Please remember I always recommend to use the official Plex container and make sure that you have a valid Plex subscription. The nvidia-smi screenshot seems pretty normal to me. Did you know that you can also issue: watch nvidia-smi from the terminal? This command will update every 2 seconds by default and you don‘t have to execute the command manually every time, to exit press CTRL+C

Nein, sie config liegt in deinem libvirt Image. Kann es sein das du das Plugin nicht richtig deinstalliert hast bzw. nur irgendwie gelöscht hast? Wenn das Plugin deinstalliert wird, wird die Ursprüngliche config normalerweise wiederhergestellt. Da müsstest schon dein libvirt Image neu machen inklusive deiner VMs neu konfigurieren, wenn ich mich jetzt nicht irre.

Hast du den GVT-g installiert?

Should be available in the next few hours in the CA App.

Something went really wrong with your installation. I would recommend that you remove the jDownloader2 container, then delete the jdownloader2 folder that lives in your appdata directory and pull a fresh copy from the CA App and wait for it to fully start. The first start can take some time so please be patient and wait for it to start.

One user reported it on GitHub but he stopped responding. No, I haven't implemented this in the container since from my testing it wasn't necessary.

Then something else must be wrong. Did you change anythig else? Maybe try to delete the container, then delete the directory for l4d2 and pull a fresh copy from the CA App. You can also try manually adding it to your Favorites in the Steam Server Browser by entering the IP from your server followed by the port eg: 192.168.1.1:27015 then click once on Refresh and it should show up.

I don‘t understand, go to the LAN tab in your Steam Server Browser, I can‘t imagine that someone else on your network has the same server name. You can change the server name in the server config file in the l4d2 directory (please make sure you stop the container first before esiting the config file). You‘ll find the Steam Server Browser in View -> Server Browser -> LAN

Even your settings are fine:

No, you don't need to change anything usually, I just installed the container and it just works on my machine with the same message:

Sorry it's not that easy when you have to watch your little son and give support at the same time. What I wanted to write was: If not, did you change anything in the template?