ich777

Aber in Sachen Stabilität leider nicht, ich hab schon auf mehreren Seiten gelesen das die Stabilität (noch) zu wünschen übrig lässt und Abstürze (momentan) keine seltenheit sind und das heißt für mich persönlich das ich da die Finger davon lasse spziell auch wenn es eine Anwenung für Unraid geht. Aber leider nicht im Idle, Idle dürfte der Verbrauch noch ein wenig höher sein und vergiss auch nicht das bei den meisten Usern der Server meistens im Idle ist. @mgutt hast du schon die neuen Ryzen mal ausprobiert bzw. kennst wen der so einen hat?

I have now created a server, but as far as I can tell the server won't save anything so after a restart from the container it will be basically be wiped, don't know if that's expected in that early stage or not. I've also saw two crashes so far from the server but I think this is currently expected.

I will look into this ASAP.

The Sundtek drivers are currently not supported on Unraid.

First of all, I would recommend that you upgrade to 6.11.1 Can you please post a screenshot form your template? Which CPU are you using? Can you post your Diagnostics? EDIT: I've now tried it on my system and it works just fine (Intel 10th gen).

Thank you for that information, I have added the port 16262 in the template (16262 UDP is still used for Steam).

I don't fork containers, but what I can do is that I look into it if I can create such a container from scratch, but you have to give me some time, I really try my best to keep up with everything.

Maybe yes, I've never tried this but in theory yes. About what adapter are we talking about? It is maybe possible that you have to trigger udev again to recognize the device or modprobe it manually.

Yup, this should not be an issue but this is also just a transport stream but should not be an issue. I would really recommend to try unmanic because IIRC I can transcode .ts files just fine with it.

Don't forget that the Audio needs also to be transcoded in most cases or subtitles that are burned in. You can always issue: watch nvidia-smi on a terminal from Unraid to see if the card is used. Yup, I would strongly recommend that you try it or better speaking use it.

We have to wait a bit longer since I see many issues on Linux with DG1 & DG2 graphics with the latest Intel Media driver: Click Click Click ...and many other unanswered questions. I think it will take a bit longer until you can get them to work reliable on Linux with the complete feature set (as this is always the case with bleeding edge hardware and especially true for Intel).

The M2000 should be good for transcoding yes. As you can see here it should be also good for h265 (HEVC) here: Click (but only for 3 simultaneous streams) Have you also read this post: Click You also have to add NVIDIA_VISIBLE_DEVICES and NVIDIA_DRIVER_CAPABILITIES to the container template with the appropriate values. Make also sure that you've reboot once or restart the Docker service after installing the Nvidia Driver plugin. I would also recommend that you try running unmanic from @Josh.5 instead of tdarr:

The ZFS plugin checks on every reboot for a new version from ZFS, downloads and installs it, as long as you have a active Internet connection on boot (don't forget if you run for example PiHole on Unraid you don't have a active Internet connection because DNS Resolution won't work unless you set a static DNS server for Unraid from Google or something else). BTW The plugin is compiled from the official OpenZFS GitHub for each individual Unraid version, then the compiled package is uploaded to the Unraid ZFS Plugin GitHub and the plugin pulls it from there. If it's integrated in the latest ZFS release (2.1.6) you can use it as usual on every other distro. You can always get your ZFS version if you issue this command from a Unraid terminal: zfs version

Yes, but where is the above mentioned modprobe.d folder, have you yet done that? Also, why do you boot into GUI mode? This is even worse than the normal mode for what you are trying to do, don't forget you are stealing the primary GPU from Unraid and as said from above, this will always lead to issues. Please change your boot mode to non GUI mode, create the modprobe.d folder and the amdgpu file from above now and reboot! Have you read the comments from above, with your setup is more wrong than one thing... It is always recommended to have one GPU for the Host (Unraid) and one for the VM, what you are doing will most likely always lead to issues. BTW now that I saw it, your graphics card the 6600/6600XT is not affected by the reset bug and the AMD Vendor Reset plugin will not do much for you. Your issue would be better suited in the VM subforums and I think it is more likely that you are having this issue because of the before mentioned things.

But then the path /mnt/cache/appdata/… should be okay and this is also my prefered way where to put the files, also keep in mind that this is the real file path and it will produce less overhead.

I somehow forgot yesterday to put in -crossplay, but I tried it now again with this option and it also works flawlessly: These are the settings that I use: I really don't know what's going on on your system... You copy over the files through SMB or am I wrong? However the folder looks like this when copying it over through SMB from my Windows machine:

Please install the AMD Vendor Reset plugin, reboot and send me the output from this command again.

Aber nur bis Intel 10th gen.

Yes, I know that because I've subscribed to that issue and also commented above, but no the build doesn't work with this workaround, I've already tried that.

Is this maybe also your issue: You can also post your Diagnostics and I will take a look at it.

Because this is done on purpose, some game servers don't work when you point them to the FUSE file path (/mnt/user/...) and you have to point it to the real file path (/mnt/cache/...). BTW is your appdata share set to not Use Cache Only or Prefer in the Share settings? I would strongly recommend that you do that because otherwise your Array will never spin down. If you set the appdata share to Use Cache Yes, the mover will move the files off of the Cache and onto the Array, that's why you see that.

I don't see the AMD Vendor Reset plugin installed in your Diagnostics... Please give me the output from: lspci -nn | grep -E "VGA compatible controller|Display controller" | grep -E "AMD|ATI|Advanced Micro Devices" | awk '{print $1}' if there is only one output (which should be) please give me also the output from: cat $(find /sys/bus/pci/devices/* -name "*$(lspci -nn | grep -E "VGA compatible controller|Display controller" | grep -E "AMD|ATI|Advanced Micro Devices" | awk '{print $1}')")/reset_method What you should definitely do on your system is blacklist the amdgpu module or binding your GPU to VFIO (but don't do both). If you want to blacklist it please do this: mkdir -p /boot/config/modprobe.d echo "blacklist amdgpu" > /boot/config/modprobe.d/amdgpu.conf Even if it worked on 6.10.3 I don't recommend doing it like you do it because you basically stealing the GPU from Unraid because you only have one GPU in your system and this could/will always lead to issues as you can clearly see in the VM subforums.

Not one. You've sent a archive with files named Dedicated, didn't had to rename them. Sounds stupid, but do you have a Windows PC where you can put the files on the server? Maybe something messes up the files while transferring.

Simply click on the side menu, then the gear icon and then you should have sliders where you can increase/decrease the Compression (more compression -> higher load on your server) and increase/decrease the Quality (better quality -> higher load on the server).

Seems like no issue over here: Steps that I did: Delete the container Delete the folder valheim in my appdata directory Pulled a fresh copy from Valheim from the CA App Let it create the initial world Stopped the container Delete all existing files from the folder .../valheim/.config/unity3d/IronGate/Valheim/worlds_local Copy the files from your archive to the path from step 7 (except for the __MACOSX folder) Started the container again Connected to the server