Jump to content


  • Content Count

  • Joined

  • Last visited

Everything posted by jonfive

  1. Pihole dot doh --- i think there might be a config issue - after installing and matching regular pihole template, aside the required settings, there is no webgui. Uninstalled, removed image and deleted the folder in appdata. Reinstalled with a new static local ip, same issue. Uninstalled original (working) pihole, deleted folder etc. Reinstalled and the gui works right away. Am i possibly missing something? I can ping google from console successfully.
  2. I followed Spaceinvader's tutorial on using an nvme device - it works on first boot. When i shut down then turn the VM back on the whole system hangs and i have to hard reset. I tried switching unsafe interrupts back and forth, both lead to the same issue. **Without adjusting any of my text above in case i'm just going crazy - It seems like it added the second address on it's own with slot=0x08 - I'm sure i didn't add it since i copied the blank host dev directly and just changed the bus to 3. <hostdev mode='subsystem' type='pci' managed='yes'> <source> <address domain='0x0000' bus='0x00' slot='0x00' function='0x0'/> </source> </hostdev> Could i possibly solve this whole situation by changing the SECOND address bus to 3 as well? remove it? I just don't really want to have any more unsafe shutdowns and lose my data again.. thanks folks tower-diagnostics-20200411-2044.zip
  3. oh boy. jeez, this will be the 4th seagate drive failure i guess i'll move the rest over to wd and get to blocking pins. Thanks for the heads up!
  4. got an alert that there are errors on my parity drive. i ran the smart extended self-test and it came up with no errors. though the two highlighted in attached image have me a bit concerned. But i'm not sure if it was just a fluke - can i 'clear' the error to see if it pops up again? or is that ill-advised?
  5. ahhh gotcha! That's an excellent explanation I think i was just treating it like a 'watch folder' rather than considering the sab/sonarr communication It works now - i just backed them both down to mnt/user/downloads. Thank you very much! You're a real asset to the community
  6. i have sabnzbd using another 'complete' folder from itself working with categories inside that complete folder - hence the complete/complete/sonarr So just make sonarr match the output path of sabnzbd plus the sonarr category folder? sorry, i'm just a little confused - the files do end up in /complete/complete/sonarr when they're finished downloading.
  7. Thanks for taking the time, i really appreciate it. Sonarr root@localhost:# /usr/local/emhttp/plugins/dynamix.docker.manager/scripts/docker run -d --name='binhex-sonarr' --net='bridge' --log-opt max-size='10m' --log-opt max-file='1' --privileged=true -e TZ="America/Los_Angeles" -e HOST_OS="Unraid" -e 'UMASK'='000' -e 'PUID'='99' -e 'PGID'='100' -p '8989:8989/tcp' -p '9897:9897/tcp' -v '/mnt/user/Downloads/Complete/Complete/Sonarr/':'/data':'rw' -v '/mnt/user/Media/':'/media':'rw' -v '/mnt/user/appdata/binhex-sonarr':'/config':'rw' 'binhex/arch-sonarr' 4a9a4e45951b5c7b0c6b82f1211504c6c86a738a7d2d9a2c13ec4a93c8ea3bdf Sabnzbd root@localhost:# /usr/local/emhttp/plugins/dynamix.docker.manager/scripts/docker run -d --name='binhex-sabnzbd' --net='bridge' --log-opt max-size='10m' --log-opt max-file='1' --privileged=true -e TZ="America/Los_Angeles" -e HOST_OS="Unraid" -e 'UMASK'='000' -e 'PUID'='99' -e 'PGID'='100' -p '8080:8080/tcp' -p '8090:8090/tcp' -v '/mnt/user/Downloads/Complete/':'/data':'rw' -v '/mnt/user/appdata/binhex-sabnzbd':'/config':'rw' 'binhex/arch-sabnzbd' eacb2791776f258d3ba207c2176d4f525b0a45db625f9b9f8e029dd8fc9ca1c2
  8. /mnt/user/downloads/complete/complete/ with the sonarr category, making the completed files go into /mnt/user/downloads/complete/complete/sonarr/ Files are indeed there. Wanted page manual import: Activity page manual import: I've had to recover some data with appdata restore, it's worked just fine for about a year since i had to redo everything. Possibly something got mixed up in the config since the restore? If need-be, is there a way where i can wipe out the config and 'start fresh' without losing the show database? or reinstall and preserve the db?
  9. Automatic import issue: Mappings are correct unless i'm missing something stupid or misunderstanding the data folder. Sabnzbd drops the completed Sonarr downloads into /mnt/user/downloads/complete/complete/sonarr/ Sonarr's data folder is mapped to /mnt/user/downloads/complete/complete/sonarr/ I can manually import successfully directly from the Wanted>Manual Import and use the /data/ folder. From using the manual import button on the activity page, it says 'No video files were found in the selected folder.' Am i missing something terribly stupid?
  10. The card is an 88se9215 - one HDD and one optical drive connected. Supposedly it's "bootable, working out of the box" on the compatibility chart. It looks like the drives are found and identified (line 946 & 948) Then it seems to timeout, fail to identify, switch to sata 2, then move on to the next one. (starting line 1005) Any ideas? I have the amd_iommu=pt appended, same thing without the amd_ tower-diagnostics-20190830-2137.zip
  11. thanks a lot! You're a real asset to the community The sde drive totally died - nothing in bios either. Lesson learned with not having parity the entire time - just happy i don't keep anything important on there
  12. Sorry to post on top, figured it might be useful - i think that this whole situation is coming from that drive (sde) which can't find the filesystem now. i got some dockers to work directly on the cache, but at this point, docker is the least of my problems. I ran filesystem check, repair - they both can't go anywhere - gives relatively the same response, expecting one block but getting another then stopping
  13. My disk 1 seems to have died since (of course the same day i get a parity drive :P) Thank you tower-diagnostics-20190827-0643.zip
  14. I had an issue with docker giving the loop2 error sort of like this thread (BTRFS: error (device loop2) in btrfs_sync_log:3168: errno=-5 IO failure) - so i went ahead and turned off docker and deleted the image, i have appdata backed up (in a working, non error throwing state). When i turn the image back on to recreate it, it makes whatever drive i put it on read only. mnt/usr, mnt/cache etc Not sure how to proceed - is there maybe something still cached somewhere that i need to remove manually so docker can't 'fall back' on it?
  15. Just wondering if i misconfigured something along the way When logged in cpu usage stays normal, a few percent on each core. As soon as the user is logged out, it pins a core 100% - goes away once a user is logged in again.. Any ideas? Previous experiences? LOGGED IN: LOGGED OUT:
  16. lol, well, i think i messed it up by doing that while not having enough free space --- it's completely full or read only, i'm assuming completely full on that 120gb drive.. at least i made an appdata backup i guess
  17. Alright, so i want to remove some of the old ssd's from my cache pool. Currently it's in a sort of JBOD mode but one volume. From reading around, i tried to balance with -dconvert=raid1 -mconvert=raid1 but it just refreshes the browser window and doesn't do anything. I narrowed the disk usage by getting some vm's off of the cache and moved to the array. I got it down to about 150 gigs. My smallest drive (that i want to remove) is only 120 gigs. I assume that trying to make a redundant raid setup for rebuilding the cache after removing wouldn't work unless the used space is less than the smallest drive, right? If it's helpful: Data, RAID1: total=44.00GiB, used=23.89GiB Data, single: total=184.00GiB, used=92.25GiB System, RAID1: total=32.00MiB, used=48.00KiB Metadata, RAID1: total=2.00GiB, used=247.83MiB GlobalReserve, single: total=79.28MiB, used=0.00B No balance found on '/mnt/cache'
  18. that's a whole lot easier and more streamlined than copy pasting random text from old cfg files Thanks a lot! I've got a ton to learn yet - but i learn a little more with every problem.
  19. Hey, i think i fixed it - (i'm sure there's a MUCH easier way) but i had an old flash drive backup. I assume this will only work if you haven't changed your drives since the backup. I went into the backup, copied the super.dat and disk.cfg over to the flash and rebooted. Restored everything the way it was. If there is a better way, please share
  20. In a bit of a pickle and a bit lost I went to add an m.2 ssd, so i powered down the server, installed it, powered back on. Now two of my cache ssd's from the btrfs pool are removed from the pool and are un-mounted. When i mount them and view the files, all of the data is still there. Since, i've removed the m.2 drive hoping it was some I/O error. If i use unassigned devices and put them back into the pool, it says that data will be erased.. i'm hesitant to do so. I'm not sure if it's one of those things that 'it always says' or not. If there's nothing i can do about it by just clicking around, is there a way (since i can see all of the files still) to copy them off to the hdd array and copy them back to the cache once it's "fixed"? Thanks a lot folks!
  21. gotcha, thanks! Was trying to get a little more performance, the ryzen powerplan, some other stuff. But i get it now, sorta brainfarted that it's emulated regardless
  22. Is there a way to fake bare metal and get the amd drivers installed on w10? Currently it thinks there's no amd product installed
  23. I'm sort of lost. After i upgraded, it's no longer recognized. I do get fan spin though. If i use a cheapo amd card (r7 240), it gets recognized in every slot. I did have acs override enabled, that was the only way that i could get it to be recognized for vm's originally -- if that makes any difference. Since, i've reset my flash drive to defaults - but i lost my drives hooked up to the marvell chipset, i'm in the process of restoring the old cfg (which had acs enabled). any ideas, suggestions? I'll try just about anything as long as i won't lose 16tb of data Pretty familiar with terminal, i can get around. 4930k asus x79 deluxe gtx 1660 (non ti) corsair tx850 psu (verified 8pin is working)
  24. unless this is what is happening: RAID0: requires 2 device, best performance, no redundancy, if used with different size devices only 2 x capacity of smallest device will be available, even if reported space is larger.
  25. 120 and 240 As far as i can tell, the two drives i have are striped