yanksno1

That's what I feared. Should have asked before I reformatted it heh. Thanks for the explanation guys.

Hi, my Unraid Server has been on the fritz lately. Been experiencing lots of crashes. One time I rebooted and noticed the xfs Unmountable: wrong or no file system notice on the drive. I stopped the array and saw I could format the drive again, so I did that. Then everything was gone on it (just this one). Did I just lose this drive, can I get this data back? I should mention I do have Double Parity (x2, I know that's redundant) drives in there, that's why I thought I was safe.

Server hasn't been up this long since September haha.

Dare I say updating it to 7.1.0 fixed it? So far seems to be running stable now again, phew. I also disabled the Mover plugin I had running which fixed the Mover issue I was having too. I guess 7.0.0 didn't like AMD systems heh.

Hi, so my first AMD Unraid Server that was built back in 2017 with the help from a buddy from work (RIP) is on the fritz I think. A few months ago it wouldn't boot up properly, then with the help from a repair guy we determined it was one of the memory sticks gone bad. After I took out one of them, then eventually replaced both sticks with a 32GB (16 dual sticks) kit it ran fine again for a while. Then I started experiencing different crash's. One was the dockers would still run but the main Unraid Sever IP address page would be completely unresponsive and a hard reboot was needed to get it going again. Then the more common one was where it'd just crash completely. Sometimes during heavy loads of downloading something (shhhh), other's while it wasn't doing anything and it'd still crash. A hard reboot was needed and it was going again. I've also noticed the mover doesn't seem to be working now, I've had to manually move stuff over (not a big deal but still annoying). Do you guys have any idea what's going on here? I'm about ready to scrap it and upgrade the system to a Intel build, but would like to see if I can fix it first. Attaching my diagnostics for you guys to look at. tower-diagnostics-20250505-2130.zip

Doing an update on Unraid last night to my Plex Linux Docker caused it to crash again. Ended up updating Unraid to the newest version, backed up my old Plex data folder and installed the Linux one again. Besides rebuilding it form scratch again, what should I copy over to hopefully get it going smoothly again? I was thinking the Metadata folder, anything else?

A couple months ago I noticed with my server if I reboot it, the network page won’t boot up. If I select the GUI interface then that boots up like normal connected to a monitor and the network page. So I’ve just been re-starting (if I need to) it like that recently. But I was wondering, is there anything I can do to fix it? Is this a known issue?

Hi, I have this docker enabled with PIA VPN. Over the last few weeks I've noticed I've been getting ignored/connection warnings pop up every now and then. One time I tried disabling the VPN and obviously started up right away. After that I turned it back on and it kept going as well. Anything I can do to get these warnings to stop?

Uh oh, think updating all the dockers just broke my Plex. I get this when I click to view the Web UI. This XML file does not appear to have any style information associated with it. The document tree is shown below. <Response code="503" title="Maintenance" status="Plex Media Server is currently running database migrations."/> Looking at the docker there's no port mappings assigned. I tried assigning it to a bridge,, that didn't work. Also tried manually putting in a port, that didn't work either. What should I do to get it back?

Basically added more directory Path's in the Radarr setup. Then when I add a movie, change the root folder structure. Added numbers so they'd be at the top when I go back in the directory tree and they're easy to find. Works great! Had a couple old ones since I updated it and they're still showing. Wondering if I can refresh it so they're not there anymore?

Yeah, I was hoping I wouldn't need separate directories. But I created a "SE Movies" directory along my other ones, added it to Plex and Radarr. Seems to do the job and don't need 2 instances of the docker running! I still think that option would be nice to have.

Is this the right spot for feature requests? Now that I figured out how to separate my UHD/HD directories by adding another folder path, only one thing is missing for me. Would love to see a option to check to replace/not replace current movie that's in the directory. Just downloaded some Director cuts of the movie I'd like to sit beside the Theoretical cuts of them. Would that be possible?

Okay, good to know thanks! Set it to the output directory and that's working as expected.

In the docker itself when I try to Start Encoding a movie.

Hi, getting an error "Can not read or write the directory.". Anything I should try? Tried restarting/start/stopping the docker and no luck there. Not sure where to go from here.

Thanks for offering to help! I finally got it going using binhex's SABnzb VPN docker after some trouble shooting. I think it was prob the lan network setting, once I did it right on SABnzb it started to work. I'm sure that was my issue here.

Trying to set this up for the first time, but can't seem to get it going with the VPN enabled. I have your DelugeVPN one running just fine now with it (knocks on wood), but can't get this one going. I copied the openvpn files over from the Deluge folder that's working fine there. Anything I should check? I'm still def a novice user with Unraid haha. Update: Switched around the STRICT_PORT_FORWARD, ENABLE_PRIVOXY yes/no settings but don't think that did it. What did was changing my LAN_NETWORK setting to match my router, that seemed to do the trick. Now to set it up and hopefully get it going with Sonarr/Radarr. Wish me luck!

Thanks for the quick reply! Definitely way past my head haha.

Hi, I can't seem to get my PIA VPN going with this docker. I copied over the Deluge openvpn files that's working over there (and just updated recently). Not sure where to go from here. If I disable it, it does load. Any tips you guys can give me to hopefully get it going?

I'll continue the conversation in this other thread (no longer pertains to this docker).

Further observation: It does seem like Sonarr or Deluge (don't know who) deletes the lower profile version if a new one downloads for the higher profile one. So obviously something's working right there.

Yup, as shown there. In deluge on the torrents the Label is "tv-sonarr", so that's working correctly I think. Looked in the Indexer settings and didn't see anywhere to specify them. Anything else I should try?

It's Queued, but not seeding anymore. Looking at the logs, don't see any obvious errors. Anything I should look for? Here's the Permissions I have "set", which I just left default. Your help is much appreciated.

Made those suggested changes and still behaving the same way. Did move it after it finished to the Completed folder! But the torrent in deluge and the original file is still there in the Completed folder on Disk 1. Think those SMART errors are the problem and it's time to replace the drive? Here's how I have the Queue set up now: EDIT: Also should mention if I manually delete the torrent in deluge, it WILL delete the file in the Completed folder. Any other suggestions to try?

Yup, here they are. I first got a couple of those Disk SMART errors a few months ago. At the time, there were only 2 but looks like I now have 5. Asked here if I should replace the HDD, but someone thought it wasn't that big of an issue since it was 2 and I just got a clean SMART test result. Just did a new one and got back errors, 5 this time. Think it's time to replace the HDD that's causing this issue? The downloading is being done on my SATA cache drive, then moved over fine (just deluge doesn't delete it). Looks like it did get moved over to the Disk 1. Posted the screen shots and the SMART test log. Your thoughts are much appreciated! tower-smart-20210109-0952.zip