cluengas

Udated to UNRAID OS VERSION 6.12.2 without any issues! My Unraid server is not too complicated but I run 5 docker containers, 4 VMs, and I also use it as a local file server. Thanks!! C

That did it!! Jorge, thank you very much!

Ok, thank you Jorge! I'm a bit puzzled because my server had been working flawlessly with the current network configuration until I upgraded to 6.12.0 Anyway, please let me know which file I need to edit to change the network configuration. I attempted to change one IP using "ip addr add 10.0.0.223/24 dev br0" but it didn't change anything. I'm thinking I could temporarily remove bond0, br0, and eth0 to get access to the webui. root@Tower:~# ifconfig bond0: flags=5443<UP,BROADCAST,RUNNING,PROMISC,MASTER,MULTICAST> mtu 1500 ether e0:d5:5e:65:b3:e4 txqueuelen 1000 (Ethernet) RX packets 98556 bytes 12180708 (11.6 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 330 bytes 121637 (118.7 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 bond1: flags=5443<UP,BROADCAST,RUNNING,PROMISC,MASTER,MULTICAST> mtu 1500 ether e0:d5:5e:65:b3:e2 txqueuelen 1000 (Ethernet) RX packets 26834229 bytes 32714654885 (30.4 GiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 17357886 bytes 15549789731 (14.4 GiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 br0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 10.0.0.224 netmask 255.255.255.0 broadcast 0.0.0.0 ether e0:d5:5e:65:b3:e4 txqueuelen 1000 (Ethernet) RX packets 98356 bytes 10782869 (10.2 MiB) RX errors 0 dropped 10 overruns 0 frame 0 TX packets 323 bytes 120619 (117.7 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 br1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 10.0.0.224 netmask 255.255.255.0 broadcast 0.0.0.0 ether e0:d5:5e:65:b3:e2 txqueuelen 1000 (Ethernet) RX packets 25979320 bytes 32186911931 (29.9 GiB) RX errors 0 dropped 10 overruns 0 frame 0 TX packets 10793772 bytes 15010107947 (13.9 GiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 br-7cd89d9eb953: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 inet 172.19.0.1 netmask 255.255.0.0 broadcast 172.19.255.255 ether 02:42:53:7f:5f:e1 txqueuelen 0 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 docker0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255 ether 02:42:0b:a3:fb:eb txqueuelen 0 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 eth0: flags=6211<UP,BROADCAST,RUNNING,SLAVE,MULTICAST> mtu 1500 ether e0:d5:5e:65:b3:e4 txqueuelen 1000 (Ethernet) RX packets 98556 bytes 12180708 (11.6 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 330 bytes 121637 (118.7 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 18 eth1: flags=6211<UP,BROADCAST,RUNNING,SLAVE,MULTICAST> mtu 1500 ether e0:d5:5e:65:b3:e2 txqueuelen 1000 (Ethernet) RX packets 26834229 bytes 32714654885 (30.4 GiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 17357886 bytes 15549789731 (14.4 GiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 16 memory 0xef700000-ef720000

Sorry I hadn't posted the server diagnostics. My Unraid server has 2 built-in NICs configured in redundant mode. Everything seems to be working but the webui interface. Thanks, Carlos tower-diagnostics-20230625-1159.zip

I forgot to mention that, booting Unraid in GUI mode, Firefox only displays "Unable to connect" "An error occured during a connection to local host"

Hello, I still have no webui. I did an SSH manual upgrade per the above instructions. The upgrade to 6.12.1 completed successfully. The server rebooted and came up running 6.12.1. The dockers, and vms on auto-start came up and worked fine. However, I still can't connect to the webui from a PC or a Mac. I've also tried using the local IP address https://10.0.0.224:54443/Dashboard and get "This site can’t be reached" "10.0.0.224 refused to connect." What next? Thanks, Carlos

I was a bit concerned about my VMs, particularly the Windows 11 one but the upgrade was uneventful. Thank you team for continuing to improve Unraid! 🤓

I meant the Time Machine docker path for Icon. I had already downloaded the icon locally to my unRAID server (/mnt/user/nas/tm.png) but oddly enough the file keeps disappearing. I'm not sure what's deleting it but it happened 3 times already. Thanks!

Could someone pls post the path for the TM docker icon? My icon path was accidentally deleted and I don't want to do a fresh install and maybe lose my TM backups... Thanks, C

Thanks for the fine TimeMachine docker container!! My iMac had not been backed up for a while and now Time Machine is working again! Under "Size Limit" I used 512 GB, which I don't think is being enforced. Probably because my Time Machine backup was close to 900 GB. So is there a way to shrink the size of an existing TM backup? Perhaps deleting the files in reverse chronological order?

As recommended, I made all the suggested backups before upgrading my unRAID server from 6.9.2 to 6.10.1 and I'm happy to report that everything is working fine, including my 5 Docker containers and 4 VMs My sincere thanks to the team that made 6.10 possible!!! 👍👍

I realize many will question the wisdom of running a VM appliance and Docker from an Unassigned SSD. Well, maybe I was complacent but I've been doing it for years and didn't have any issues until I installed the latest Unassigned Devices update, which made a couple of VMs and a Docker unstartable. After this happened I modified the paths using the new Unassigned Devices short path, which fixed my Windows10 VM! Unfortunately the new short path did not work everywhere. I'm still a big fan of Unassigned Devices and will continue to use it but I need some ideas on how to fix a couple of crippling issues. My Plex server (Docker) is no longer accessible although the Docker comes up ok and my Sophos UTM firewall (VM) fails to start with the dreaded >>> Booting from Hard Disk... Boot failed: not a bootable disk No bootable device. >>> Thanks, C tower-diagnostics-20220104-1750.zip

This issue was there before I successfully upgraded to 6.7.1. The server appears to be working fine so this could be just a minor cosmetic issue. Below is a typical CLI processor output which includes the "cache size" >>> Linux 4.19.55-Unraid. root@Tower:/# cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 158 model name : Intel(R) Core(TM) i7-8700K CPU @ 3.70GHz stepping : 10 microcode : 0xb4 cpu MHz : 4900.900 cache size : 12288 KB physical id : 0 siblings : 12 core id : 0 cpu cores : 6 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 22 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf tsc_known_freq pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch cpuid_fault invpcid_single pti ssbd ibrs ibpb stibp tpr_shadow vnmi flexpriority ept vpid ept_ad fsgsbase tsc_adjust bmi1 hle avx2 smep bmi2 erms invpcid rtm mpx rdseed adx smap clflushopt intel_pt xsaveopt xsavec xgetbv1 xsaves dtherm ida arat pln pts hwp hwp_notify hwp_act_window hwp_epp md_clear flush_l1d bugs : cpu_meltdown spectre_v1 spectre_v2 spec_store_bypass l1tf mds bogomips : 7392.00 clflush size : 64 cache_alignment : 64 address sizes : 39 bits physical, 48 bits virtual power management: >>>

Thanks for the prompt reply. I should have mentioned that I had already tried NUT with similar results. That is, it shuts down Unraid and the UPS but it fails to display any values for "Nominal Power", "UPS Load", or "UPS Load %". So I uninstalled the NUT plugin and went back to the builtin UPS app. Another interesting point is that I can configure the "UPS cable:" settings to UPS, Simple, Smart, and even Ether and the UPS status goes back to "Running/Online". Only selecting Custom and leaving the cable type blank results in Status: "Stopped"

hi, I have the same problem many of us are having with apcusbd. I'm using an APC Smart-UPS X 2200VA to protect my Unraid server, HTPC, TV, network gear, etc. and, of course, to gracefully shut down my Unraid server during a power outage. Using the included PowerChute Business Edition software on my Windows 10 VM (in UR), I get full functionality, including "Nominal Power", "UPS Load", and "UPS Load %". So I know the UPS is sending out that info via the USB interface. When the APC Smart-UPS is connected to the Unraid server and managed with Settings/UPS Settings it performs a clean Unraid server shutdown and a couple of minutes later shuts itself off, as expected. So it is performing its main task. Some would say that the lack of "Nominal Power", "UPS Load", and "UPS Load %" is purely cosmetic but I think they provide important information and it would be nice to see them working again (or have them removed from the menu ) Thanks to the contributors of this forum! Carlos

This is my 1st unRAID server and my 1st comment in this forum M/B: Gigabyte Technology Co., Ltd. - Z370 AORUS Gaming 7 CPU: Intel® Core™ i7-8700K CPU @ 3.70GHz I had a similar problem with not being able to use the built-in audio card in my Windows 10 VM. All my IOMMU groups contain a single device, except for group 15 below. I tried all options I could find but nothing was working. IOMMU group 15: [8086:a2c9] 00:1f.0 ISA bridge: Intel Corporation Device a2c9 [8086:a2a1] 00:1f.2 Memory controller: Intel Corporation 200 Series PCH PMC [8086:a2f0] 00:1f.3 Audio device: Intel Corporation 200 Series PCH HD Audio [8086:a2a3] 00:1f.4 SMBus: Intel Corporation 200 Series PCH SMBus Controller Since the device that was causing my Win10 VM to crash was not keeping the audio device from showing up as an "Audio Device" in the VM config, I decided to try simply blocking the SMBus Controller and, happily, that took care of my problem. Now I can enjoy a very fast Win10 VM with great sound, even over RDP sessions... Below in bold is the modification I made to the Syslinux configuration file. >>> label unRAID OS menu default kernel /bzimage append vfio-pci.ids=8086:a2a3 initrd=/bzroot >>> Thanks to all of you that generously contribute to the forum! I've gotten many, many answers here. I particularly enjoy the ones that explain in some detail the unRAID architecture Carlos