John Graham

Members
  • Posts

    48
  • Joined

  • Last visited

Everything posted by John Graham

  1. Unraid OS to 6.12.6 when i look though the app and see something I might like to look at a little closer it justit just sits there with the unraid logo moving and never opens up for me to pick install ? every thing lookd to be working with no problems but that any thoughts John G. bigboy-diagnostics-20240206_2049.zip
  2. Thanks for the reply... i think this is what you asked for.... thanks again john bigboy-diagnostics-20221203-0323.zip
  3. Hello .. John Here is a small problem and hope this is a goo place to put it unRAIDServer-6.11.5-x86_64 came out. So i thought i would keep up to date and tried to install it. This is the error i keep getting ( Anythough's I know it's something i did or did not do 😙 ) plugin: updating: unRAIDServer.plg plugin: downloading: unRAIDServer-6.11.5-x86_64.zip ... 100% plugin: downloading: unRAIDServer-6.11.5-x86_64.md5 ... 100% plugin: downloading: unRAIDServer-6.11.5-x86_64.md5 ... done writing flash device - please wait... Archive: /tmp/unRAIDServer.zip plugin: run failed:/bin/bash Executing hook script: post_plugin_checks I added from screen grabs ... dont know if that will help As always Un-Raid still number 1 in my book Anythought's John
  4. Here is the file you asked for... one more question. Running in safe mode what is the best way to test the through put. bigboy-diagnostics-20220210-2223.zip
  5. Hello, John G. here with a network problem Description Main server SuperMicro Server Registration : Unraid OS Pro Motherboard: Supermicro X9QR7-TF+/X9QRi-F+ , Version 123456789 American Megatrends Inc, Version 3.0a BIOS dated: Thu 03 Apr 2014 12:00:00 AM EDT Intel® Xeon® CPU E5-4650 v2 @ 2.40GHz A happy longtime Pro user. I never had any major problems. That I could not get working. Well I have now, need help! Server has been running with no problems. We were using windows vm and found very slow downloads. jumped to a linux vm and found the same. only getting 11MB/s Download . If I check with a wired computer and i am getting around 950 MB/s Download. so i installed more network cards all showing 1000 what unraid show: Mode of operation eth0 1000 Mbps, full duplex, mtu 1500 eth1 1000 Mbps, full duplex, mtu 1500 eth2 interface down ( Ran out on network plugs) eth3 1000 Mbps, full duplex, mtu 1500 eth4 interface down ( Ran out on network plugs) eth5 interface down ( Ran out on network plugs) any thoughts on why this going wrong... any help bigboy-syslog-20220205-1052.zip
  6. Hello All I need some help with my setup. I have a full un-raid server running here. i am running ( un-raid vm nextcloud 22.2 ). i am also running plex as a docker. i Would like my kids/grandkids able to Access PLEX to get family Videos ( So that means Upload and Download ) to a plex folder i have tried just about all i can think Of. Any help Thanks John
  7. I have it all a mess now ... i would like to give each there own ip address. how should it be setup i always have problems with some programs use the servers address and a port number and others gete a address with not problems ... our playong around in the setting after asking for help they are sll on the same (server address) any thoughs thanks again
  8. thanks but i dont have that here ... i will show you what i have .... any help here i would love ... need to get me VM back in the same address set
  9. I am having some of the same things here. With a bad address. 192.168.1.1/255 is the main address pole . But on my vm thats running windows 10 and it keeps getting address 192 168.122.216. Anythoughs of fixing this Thanks Again John
  10. The Answer is yes use nano or this worked on my system open up the shell for nexcloud cd /config/www/nextcloud pwd should show ":/config/www/nextcloud#" copy and paste occ config:system:set trusted_domains 1 --value=192.168.1.* change your ip to the one you need ... Did this from memory hope it works and helps you out
  11. Hello John G. here with a server question. and maybe some help .. my server had 2 cards on the mother board. i wanted to move the Camera system running shinobi_pro when i tried to split 192.168.1.1 hole network 192.168.19.1 shinobi_pro cameras every seems to works i can see the cameras and use the but all from the .1.1 network with no problem but all Dockers report no. "not available" i think the says no internet.. i have tried just about every thing and get it working "From root and ping google.com "root@BigBoy:~# ping google.com "ping: google.com: Name or service not known "root@BigBoy:~# ping google.com "^Z "[2]+ Stopped ping google.com "root@BigBoy:~# has to hit Control-Z would not stop. but if i try to ping 192.168.1.1 no problem i get this " "root@BigBoy:~# ping 192.168.1.1 "PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data. "64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=0.353 ms "64 bytes from 192.168.1.1: icmp_seq=2 ttl=64 time=0.419 ms "c64 bytes from 192.168.1.1: icmp_seq=3 ttl=64 time=0.456 ms "^C "--- 192.168.1.1 ping statistics --- "3 packets transmitted, 3 received, 0% packet loss, time 2074ms "rtt min/avg/max/mdev = 0.353/0.409/0.456/0.042 ms "root@BigBoy:~# " So i am a working .. it like it cant find the DNS??? Anythought thanks John
  12. well here is what i looded. you tell me i liked it was "official docker hub image" "Nextcloud based on the official docker hub image. Nextcloud 20.X with full ONLYOFFICE integration. Based on Apache."
  13. Back Again... Still not working i tried: occ maintenance:mode --off and ./occ maintenance:mode --off ./ worked but gave me this : # ls 3rdparty apps core data lib ocs remote.php status.php AUTHORS config cron.php index.html occ ocs-provider resources themes COPYING console.php custom_apps index.php ocm-provider public.php robots.txt version.php # pwd /var/www/html # occ maintenance:mode --off sh: 9: occ: not found # ./occ maintenance:mode --off Console has to be executed with the user that owns the file config/config.php Current user id: 0 Owner id of config.php: 33 Try adding 'sudo -u #33' to the beginning of the command (without the single quotes) If running with 'docker exec' try adding the option '-u 33' to the docker command (without the single quotes) # sudo sh: 11: sudo: not found # ./sudo occ maintenance:mode --off sh: 12: ./sudo: not found #
  14. boy thanks i was just going to beed hehehe ... I tryed and this is waht comes up # php /config/www/nextcloud/occ maintenance:mode --off Could not open input file: /config/www/nextcloud/occ # pwd /var/www/html # php occ maintenance:mode --off Console has to be executed with the user that owns the file config/config.php Current user: root Owner of config.php: www-data Try adding 'sudo -u www-data ' to the beginning of the command (without the single quotes) If running with 'docker exec' try adding the option '-u www-data' to the docker command (without the single quotes) # # sudo sh: 15: sudo: not found # -u www-data php occ maintenance:mode --off sh: 17: -u: not found # thanks again ...
  15. Hello ... This is John G. a long time user of next cloud. Found that 20.x will be the one to switch to .. Installed the DataBase and then next cloud with no problem played around with it Nice added some stuff and played. Logged off and today tried to get back in and it is stuck in "Maintenance mode" i can not get it past this ... I have read and looked over the interweb and nothing will work! i have been trying " sudo -u abc php /config/www/nextcloud/occ maintenance:mode --off" i found no sudo in the console how can i get it out of "Maintenance mode" Sorry to Ask here if this is the wrong place ... thanks John G.
  16. Will I am Back again ... wanted to say thanks to all the help ... I just got in a GTS RADEON RX 580. AND BOY WHAT A NIGHTMARE. First it does not fit to tall for a 4U Case.. I can live with that .. cant get it working and i am back again here to see if you all can bail me out again . tell you what i can install windows 10 VM fast now .. after doing it 20 some times ?;-> 1) i have the server in the basement and the computer lab in the attic(4th floor) i have never had a monitor setup for it other that the VGA for install and watch to boot. My plan was never use a monitor in the basement using a computer from the 3rd floor to install and run the VM's. now my big question ( i can use the card it another computer so it is not a wast). But how can install the card in a vm? do i need a monitor to set it up. if so with it have to stay there? some of what i tryed: a) i do a full install of windows 10 pro b) load all drivers to get the system up and running Key and all c) i install "nomachine" in the new VM much faster than vnc, and it bring it's own software sound card with the program so you can have sound and it is FREE 😆 d) switch video card from VNC to 580 boot up and nothering e) even tried added 2 Video cards 1)vnc 2)580 still no good as soon as i try to install drivers for the 580 ( the drivers do see the card ) screen loads about 1/2 way (48%)goes black and nothing works all black screen on the VNC and npmachine ?:-< UnRaid Version: 6.8.3 Pro Supermicro X9QR7-TF+/X9QRi-F+, Version 123456789 American Megatrends Inc, Version 3.0a Intel® Xeon® CPU E5-4650 v2 @ 2.40GHz Memory 128 GiB DDR3 Multi-bit ECC Utilization: 15% Overall Load: 4% thanks as always John
  17. ok .. again thanks so much ... looks a little smaller ... i am sending a pic on the mother board and see if you all think that it is the same pci-e 3.0 x16 if you would please. thanks john
  18. See i knew some one would have a good answer for me .. The card is a little big it will take up 2 of my 4 slots. and does it need 6pin power to run? thanks
  19. Hello Not A new user but new problem ... I am running a Full 4U SuperMicro X9QR7-TF+/X9qri-f+ I am in need to Add a video card i have 4 slots pci-e 3.0 X16 i have no power (6pin) to plugin to the cards. i'm not a gamer, have never been. So i don't know one card from another. (Nothing Wrong with Games) I need to run a 3D software on the MAC and or Windows 10 (Both would be Grate) Can any one PLEASE!! help out here ... I know i am asking a lot. But i just don't know what i need .. A little gaming for the Family ?;-> i don't need a killer card just a good one. It would be cool it it was small i could add more than one. Any help PLEASE i will even Leave me Home e-mail {[email protected]) Thanks John
  20. Hello All I am running Version: 6.8.0-rc9 with out any problems to say .... I see that the Drives where not shuting down. Even if i click on the little I-con. Was working Before Version: 6.8.0-rc9 ( I think ). so i have 7 drives on line 8 if you count the Parity drive. Working with blue iris and took the 7th drive away from the stack using included disk(s)=6 /Excluded disk(s):-drive 7 that was saved for Blue iris files. Trying to track down if it was something I had done the keeping all the drives online . I took away all the setting in the included disk(s)=all / Excluded disk(s)=none.Did not help. All still keep running but Blue Iris can not see its drive ( bummer ) Blue Iris runs in a Windows 10 VM So no biggie just switch it back the way i had it ... Well that's where unraid got stuck. I had this and the Bottom of the screen for 14hrs (PS still the from 8pm Last night) "Array Stopping•Retry unmounting disk share(s).." i know i can force a reboot that still works is the anyway to reboot with out restarting the array. Sorry for the long message but this one has me stuck Thanks John
  21. all this time an i never knew about this program .. works for me and i love it ... thanks
  22. <?xml version='1.0' encoding='UTF-8'?> <domain type='kvm'> <name>Windows 10 Pro</name> <uuid>f020ec0c-6cf4-8a62-6998-00181585d922</uuid> <description>Windows 10 Pro (full install)</description> <metadata> <vmtemplate xmlns="unraid" name="Windows 10" icon="windows.png" os="windows10"/> </metadata> <memory unit='KiB'>9437184</memory> <currentMemory unit='KiB'>9437184</currentMemory> <memoryBacking> <nosharepages/> </memoryBacking> <vcpu placement='static'>19</vcpu> <cputune> <vcpupin vcpu='0' cpuset='16'/> <vcpupin vcpu='1' cpuset='56'/> <vcpupin vcpu='2' cpuset='17'/> <vcpupin vcpu='3' cpuset='57'/> <vcpupin vcpu='4' cpuset='18'/> <vcpupin vcpu='5' cpuset='58'/> <vcpupin vcpu='6' cpuset='19'/> <vcpupin vcpu='7' cpuset='59'/> <vcpupin vcpu='8' cpuset='20'/> <vcpupin vcpu='9' cpuset='60'/> <vcpupin vcpu='10' cpuset='21'/> <vcpupin vcpu='11' cpuset='61'/> <vcpupin vcpu='12' cpuset='22'/> <vcpupin vcpu='13' cpuset='23'/> <vcpupin vcpu='14' cpuset='63'/> <vcpupin vcpu='15' cpuset='25'/> <vcpupin vcpu='16' cpuset='65'/> <vcpupin vcpu='17' cpuset='27'/> <vcpupin vcpu='18' cpuset='67'/> </cputune> <resource> <partition>/machine</partition> </resource> <os> <type arch='x86_64' machine='pc-i440fx-3.1'>hvm</type> <loader readonly='yes' type='pflash'>/usr/share/qemu/ovmf-x64/OVMF_CODE-pure-efi.fd</loader> <nvram>/etc/libvirt/qemu/nvram/f020ec0c-6cf4-8a62-6998-00181585d922_VARS-pure-efi.fd</nvram> </os> <features> <acpi/> <apic/> <hyperv> <relaxed state='on'/> <vapic state='on'/> <spinlocks state='on' retries='8191'/> <vendor_id state='on' value='none'/> </hyperv> </features> <cpu mode='host-passthrough' check='none'> <topology sockets='1' cores='19' threads='1'/> </cpu> <clock offset='localtime'> <timer name='hypervclock' present='yes'/> <timer name='hpet' present='no'/> </clock> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/local/sbin/qemu</emulator> <disk type='block' device='disk'> <driver name='qemu' type='raw' cache='writeback'/> <source dev='/dev/disk/by-id/ata-WDC_WD5000HHTZ-04N21V0_WD-WXU1E13VLAN2'/> <target dev='hdc' bus='sata'/> <boot order='1'/> <address type='drive' controller='0' bus='0' target='0' unit='2'/> </disk> <disk type='file' device='disk'> <driver name='qemu' type='raw' cache='writeback'/> <source file='/mnt/user/Steam-Share/Windows 10/vdisk2.img'/> <target dev='hdd' bus='virtio'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x09' function='0x0'/> </disk> <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <source file='/mnt/user/isos/Windows/Windows_10/Win10_1809Oct_v2_English_x64.iso'/> <target dev='hda' bus='ide'/> <readonly/> <boot order='2'/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </disk> <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <source file='/mnt/user/isos/virtio-win-0.1.160-1.iso'/> <target dev='hdb' bus='ide'/> <readonly/> <address type='drive' controller='0' bus='0' target='0' unit='1'/> </disk> <controller type='pci' index='0' model='pci-root'/> <controller type='ide' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <controller type='sata' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </controller> <controller type='virtio-serial' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> </controller> <controller type='usb' index='0' model='ich9-ehci1'> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x7'/> </controller> <controller type='usb' index='0' model='ich9-uhci1'> <master startport='0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0' multifunction='on'/> </controller> <controller type='usb' index='0' model='ich9-uhci2'> <master startport='2'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x1'/> </controller> <controller type='usb' index='0' model='ich9-uhci3'> <master startport='4'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x2'/> </controller> <interface type='bridge'> <mac address='52:54:00:68:60:02'/> <source bridge='br0'/> <model type='virtio'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> <serial type='pty'> <target type='isa-serial' port='0'> <model name='isa-serial'/> </target> </serial> <console type='pty'> <target type='serial' port='0'/> </console> <channel type='unix'> <target type='virtio' name='org.qemu.guest_agent.0'/> <address type='virtio-serial' controller='0' bus='0' port='1'/> </channel> <input type='tablet' bus='usb'> <address type='usb' bus='0' port='1'/> </input> <input type='mouse' bus='ps2'/> <input type='keyboard' bus='ps2'/> <graphics type='vnc' port='-1' autoport='yes' websocket='-1' listen='0.0.0.0' keymap='en-us'> <listen type='address' address='0.0.0.0'/> </graphics> <sound model='ac97'> <address type='pci' domain='0x0000' bus='0x00' slot='0x08' function='0x0'/> </sound> <video> <model type='qxl' ram='65536' vram='65536' vgamem='16384' heads='1' primary='yes'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </video> <memballoon model='virtio'> <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/> </memballoon> </devices> <seclabel type='dynamic' model='dac' relabel='yes'/> </domain>
  23. thanks... i though there was a work a round... only things still not working. this is what was already in there and the start menu shows sounds card is there but it still not working. so i put your code in place a <sound model='ich97'> <address type='pci' domain='0x0000' bus='0x00' slot='0x08' function='0x0'/> </sound> and it shows no sound card? "