alhatmy

Thanks! When I called Etisalat, they were clueless about the static IP (perhaps because it's reserved for business accounts only?). What is the specific name of the service you're referring to? As of cloudflare, what links/ports must include please ?

(Output is anonymized, use '-vv' to see full details) Unraid OS 6.11.1 with My Servers plugin version 2022.11.29.0742 ✅ Signed in to Unraid.net as alhatmy Use SSL is no ✅ Rebind protection is disabled for myunraid.net Local Access url: http://Tower.local ✅ 192-168-12-56.hash.myunraid.net resolves to 192.168.12.56 Remote Access url: https://[redacted].hash.myunraid.net:[redacted] ✅ [redacted].hash.myunraid.net resolves to [redacted] Request: { "keyfile": "[redacted]", "plgversion": "2022.11.29.0742", "internalhostname": "Tower.local", "internalport": "80", "internalprotocol": "http", "remoteaccess": "yes", "servercomment": "Media server", "servername": "Tower", "internalip": "192.168.12.56", "externalhostname": "*.hash.myunraid.net", "externalport": "[redacted]", "externalprotocol": "https", "unraidreport": "{\"os\":{\"serverName\":\"Tower\",\"version\":\"6.11.1\"},\"api\":{\"version\":\"2.54.0\",\"status\":\"running\",\"environment\":\"production\",\"nodeVersion\":\"v18.5.0\",\"emhttpMode\":\"nchan\"},\"apiKey\":\"valid\",\"myServers\":{\"status\":\"authenticated\",\"myServersUsername\":\"alhatmy\"},\"relay\":{\"status\":\"connected\"},\"minigraph\":{\"status\":\"connected\"},\"cloud\":{\"status\":\"ok\",\"ip\":\"52.40.54.163\"},\"flashbackup\":{\"activated\":\"yes\",\"error\":\"no\"}}" } Response (HTTP 200): [] success

Thanks .. I'll ignore then Rebulding 2 disabled drives in the hopes that it won't occur again.

still ..

Nov 27 03:34:19 Tower nginx: 2022/11/27 03:34:19 [error] 11559#11559: *4553 recv() failed (104: Connection reset by peer) while reading upstream, client: 192.168.12.141, server: , request: "GET //wsproxy/5700/ HTTP/1.1", upstream: "http://127.0.0.1:5700/", host: "192.168.12.56" Nov 27 03:39:26 Tower nginx: 2022/11/27 03:39:26 [error] 11559#11559: *8135 recv() failed (104: Connection reset by peer) while reading upstream, client: 192.168.12.141, server: , request: "GET //wsproxy/5700/ HTTP/1.1", upstream: "http://127.0.0.1:5700/", host: "192.168.12.56" Nov 27 06:08:24 Tower kernel: Plex Media Scan[36737]: segfault at 0 ip 000014ba456374dd sp 00007ffefe255d00 error 4 in libavcodec.so.58[14ba45605000+292000] Nov 27 18:08:09 Tower kernel: traps: Plex Transcoder[1195] trap divide error ip:1521fb7d9139 sp:7fff24e564d0 error:0 in libavformat.so.58[1521fb76d000+302000] Nov 27 18:08:09 Tower kernel: traps: Plex Transcoder[1195] trap divide error ip:1521fb7d9139 sp:7fff24e564d0 error:0 in libavformat.so.58[1521fb76d000+302000] Nov 28 04:12:12 Tower kernel: Plex Media Scan[11717]: segfault at 0 ip 0000146478b294dd sp 00007ffc94f16650 error 4 in libavcodec.so.58[146478af7000+292000] Nov 28 04:12:12 Tower kernel: Code: 41 56 41 54 53 0f 57 c0 0f 11 46 20 0f 11 46 10 0f 11 06 48 c7 46 30 00 00 00 00 8b 6f 10 48 8b 17 89 e9 48 89 e8 48 c1 e8 03 <8b> 04 02 0f c8 80 e1 07 d3 e0 8d 4d 10 8b 57 18 c1 e8 f0 39 ca 0f tower-diagnostics-20221129-0140.zip

I attempted to upgrade two drives with more storage space, but I couldn't get the rebuld to start because of this (Unmountable: Unsupported partition layout). Had to stop the build, restart, and format the new drives multiple times to get them to work, but now they display No data! Is there an app to recover? And does this mean that there is no way to recover from parity using rebuld?

Thanks, I'll post again if it occurs

I've attached diagnostics; could someone please confirm if this is a hardware issue? The last time this happened was around a month back, when I discovered the unraid server was still running but everything was down. tower-diagnostics-20221030-0813.zip

I don't know how to make it work. It has something to do with blocked ports.

Thank you, but I've already followed every step.. I'm certain it has to do with 443 being blocked by the ISP.

Hello, is it possible to change the default secure port 443? Neither the remote connection nor the flash backup are possible. It's likely because port 443 is blocked; if it's possible to change it, please tell me how.

at least - how can I find the issue myself ?

Your server has detected hardware errors. You should install mcelog via the NerdPack plugin, post your diagnostics and ask for assistance on the unRaid forums. The output of mcelog (if installed) has been logged. Please help, attached tower-diagnostics-20210830-0533.zip

Thanks !! coudln't figure how to fix it in my new pc, had to format 3 times till I found this ...

Seems worked! replaced 1 cpu by a another one .. Was this the only issue ?

After restart, unraid won't boot with those errors (detected by 10, t=60126 juffues, g=2257, q=16) Sending NMI from CPU 10 to CPUs 0: ... ... ... please help, how to ignore those errors from the boot or how to fix .. Note; was trying to do Mover before the restart & Had the recent Unraid Upgrade

انا استخدمه لاكثر من سنتين .. وسيرفري الحالي عدى 100+ تيرا لاي استفسرارات انا فالخدمة ..

I'm using Unraid for over year, can't remember when those issues started but booting usually takes 5-15 minutes and fails 50% times (where I have to reboot again) and try my luck! Is there a way to ignore the attached Flash checks? Note: just replaced my Flash with recent flash backup, same issue

yes I found all files. and I'll check the filesystem once done ..... thanks

The shares still found in flash backup compressed (\config\shares), but not showing in /mnt/user/ ... Parity-Sync/Data-Rebuild in progress - 28 hours to finish, is there any chance it'll come back? or it's impossible, just create new ?

Was able to fix the drive (while it's unassigned drive), and the new drive still building but (shares are still missing). I'll just hope if someone can advice me if I can bring shares back ........... plz

ok so I checked the filesystem, didn't show errors .. so I removed that drive and replace with a new .... it seems some shares still not showing in shares page! Is there a way to bring it back? I have a backup from the flash (usb) ..

Thanks ... Just to confirm, is it more safer to stop the array and use that drive a unassigned just to copy all important files ? or this might damage more ..

Attached, Drive 10 - 2YK9ZWBD tower-diagnostics-20200713-2020.zip

Got this strange issue .. I hope to find a fix ! 1- Yesterday, Drive X went offline (disabled) and I had to rebuild the server .. till that time seems the 1 Parity online took over 2- I didn't reboot the server only stopped the Array, plugged 1 new driver to be the 2nd Parity and changed Drive X cables .. it worked again! 3- Started the Array again, I could see Drive x data and started the sync ... it requires 1 day 4- During the sync I Paused the sync few times and resumed, since I was using PLEX 5- When the Sync reached 60%-80% I noticed Drive X is used 90% but with No data in it ! even the share shows No Data .. 2nd share seems hidden/deleted (I'm sure the share was accessible after starting the sync). Now the sync finished .. and I can't find the files .. what to do ?? the drive shows used 90% with 0 data ..