Martintheshred

Cheers for this Elmuziko thats what I did on the off chance that well if its broken I cannot make it any worse (LOL) and change it to this below I was just reply but you beet me to it hope they get the update sorted though

It was a stupid Question Thanks Silentbob all I had to do was open up the template and type linuxserver/mariadb:10.6.13 into the repository section and it work. just need to remember that for nexttime

Thanks for this Silentbob this is probably a stupid newbie question how do I do that? Do I just open up the Unraid template and change it there?

Just did the Mariadb upgrade and getting the same issue and my Nextcloud will not work looking in my MariaDB Logs and keep getting the same recurring Issue

Hi Guys Hopefully this is the right forum for this topic? I have been running and Unraid server for a while and using time machine to back up my MacBook pro the runs OS Big Sur. everything worked ok until I updated the Unraid server to Unraid Version 6.11.5 and from then I have not been able to get Time Machine to work. after following @SpaceInvaderOne Ones video I decided the only option was to delete the share on Unraid and start again. with a New Share etc.. I used Binhex_Krusader to delete the Shares and then went into terminal and using the command "cd /mnt/user/" and saw the shares were still in there so I used the command "rm -rfv and the share name" that appeared to delete the shares from the Unraid server however when look at the Network Server in Finder on My MacBook I can still see the shares / folder however I cannot connect to them obviously. So what am I missing here? any help would be most appreciated. Thanks in advance

Hi Guys I tried to do an update to the latest update using the Gui updater and it is stuck on update in progress when I oped the logs it says "Could not open input file: /config/www/nextcloud/cron.php" do you have any suggestions I have also tried this command in terminal "docker exec -it nextcloud updater.phar" and get "Step 6 is currently in process please try later" I am running the latest Unraid version 6.11.5 on a Dell Poweredge T320 Server and have had no problems in the past updating Nextcloud using the GUI

Cheers Guys for your help. Just wanted to check that I could do it that way. My other drives in the array are either 500gb or 1Tb. I will mark this up as completed.

Hi Guys Sorry to ask a dumb question however I have just had one of my two 1Tb parity Drives go down and as was thinking of upgrading my other 6 drives to 2Tb Drives I was wondering can I replace the dead 1Tb parity drive with a bigger 2Tb drive and then at a later date replace the second 1Tb parity drive that is at present still working with a bigger 2Tb drive say in a month or two? Hopefully this makes sense and is not too much of a dumb question. My Server is a Dell Poweredge T320 running Unriad 6.9 was going to change the parity drive before upgrading to 6.10.

Just an update thanks for all your advice with regards to this I was able to find out what the problem was. I had random OVMF file that was being referenced from a previous Macinabox install I had tried deleted and then forgot about and even though I used the terminal command "rm -r /mnt/user/appdata/macinabox/" this file was still hiding and I was still getting the same problem. So I used Binhex-Krusader to go through every file on my array and was able to find the offending ovum file delete it and complete the install and now have a OSX Monterey running perfectly so I can check to see if apps I use on a daily basis will migrate from Big Sur to Monterey before I do the update on my main MacBook.

Hi Weaver8185 did you get Monterey to install mine just keeps looping around to this screen?

Hi Cat2devnull thanks for your advice I ended up deleting the whole container etc... and then downloading it again and I appears to be installing 😃

Hi Thank you for the info I will see if it downloaded and then let you. Know how it goes

Hi Sorry to sound like a numpty I followed the video guide ran the user scripts left everything as set in the template and got this error message when when I went to run the VM for the first time. I have not edited the xml etc. I am trying to install Monterey onto the server so I can see if it will run the version of Filemaker I have before I update my MacBook Pro. I do not know much about editing code so please be gentle on me. Thank in Advance Martin

Hi Guys I have a bit of an issue and hopefully you can point a Newbie in the best direction. I am running a self hosted Nextcloud instance on Unraid with a Mariadb database. I want to add Swag so I can resolve an HTTPS error. Sorry for the long explanation since I set up Nextcloud I have forgotten my Mariadb login’s (like a numpty) both Mariadb “root and Nextcloud” I was also looking at using Adminer to make access to Mariadb easier for adding other databases. Any help would be helpful in finding out how to reset both passwords cheers Martin

Hi xxDeadbolt Sorry for the delay in getting back to you and thanks for your help I have been able to sort out every thing except these below with your help and suggestions. I think I will have to install a Swag docker etc to sort out the remaining issues however for now getting the main database columns and primary keys sorted out is a big step forward for a newbie like me who does not do a lot of command line stuff. The "X-Frame-Options" HTTP header is not set to "SAMEORIGIN". This is a potential security or privacy risk, as it is recommended to adjust this setting accordingly. The "Strict-Transport-Security" HTTP header is not set to at least "15552000" seconds. For enhanced security, it is recommended to enable HSTS as described in the security tips ↗. Your web server is not properly set up to resolve "/.well-known/webfinger". Further information can be found in the documentation ↗. Your web server is not properly set up to resolve "/.well-known/nodeinfo". Further information can be found in the documentation ↗. Your web server is not properly set up to resolve "/.well-known/caldav". Further information can be found in the documentation ↗. Your web server is not properly set up to resolve "/.well-known/carddav". Further information can be found in the documentation ↗. Cheers again for all your help I will let you know how I get on with the rest

Hi Guys hopefully I am in the correct area for this however I am running Next cloud on my server just use as a way to share files between different machines I have at home if I need to access it from outside my home I use a vpn and wireguard however after my last Netcloud update I got a few error messages come up in the security and setup warnings area of the administration overview page on (see below) Nextcloud and can not work out how to fix them. I have the latest version of Nextcloud running and it appears to be working ok. There are some warnings regarding your setup. The "X-Frame-Options" HTTP header is not set to "SAMEORIGIN". This is a potential security or privacy risk, as it is recommended to adjust this setting accordingly. The "Strict-Transport-Security" HTTP header is not set to at least "15552000" seconds. For enhanced security, it is recommended to enable HSTS as described in the security tips ↗. Your web server is not properly set up to resolve "/.well-known/webfinger". Further information can be found in the documentation ↗. Your web server is not properly set up to resolve "/.well-known/nodeinfo". Further information can be found in the documentation ↗. Your web server is not properly set up to resolve "/.well-known/caldav". Further information can be found in the documentation ↗. Your web server is not properly set up to resolve "/.well-known/carddav". Further information can be found in the documentation ↗. Your installation has no default phone region set. This is required to validate phone numbers in the profile settings without a country code. To allow numbers without a country code, please add "default_phone_region" with the respective ISO 3166-1 code ↗ of the region to your config file. The database is missing some primary keys. Due to the fact that adding primary keys on big tables could take some time they were not added automatically. By running "occ db:add-missing-primary-keys" those missing primary keys could be added manually while the instance keeps running. Missing primary key on table "oc_federated_reshares". Missing primary key on table "oc_systemtag_object_mapping". Missing primary key on table "oc_comments_read_markers". Missing primary key on table "oc_collres_resources". Missing primary key on table "oc_collres_accesscache". Missing primary key on table "oc_filecache_extended". The database is missing some optional columns. Due to the fact that adding columns on big tables could take some time they were not added automatically when they can be optional. By running "occ db:add-missing-columns" those missing columns could be added manually while the instance keeps running. Once the columns are added some features might improve responsiveness or usability. Missing optional column "reference_id" in table "oc_comments". Hopefully you can help a numpty out and

Hi Squid With regards to your question I do not have a "cache" pool and I downloaded the diagnostics file however while looking at your Fix common problems it showered there was an update. I ran the update that rescanned my system and the error messages disappeared.

Hi Folks I hope I am posting in the correct group? got a strange error message that came up after fix common problems ran can you please advise see screen shot below every thing that I have running works ok and everything is kept updated and I have not had any power cuts etc... I am scratching my head at the moment?

Thanks @Tomtom77550 & @whitedwarf for your info this was foxing me good style

Hi Thanks for your help found it hidden in the program files doing the update now

Hi There thank you for all the work you have done with this Nextcloud Docker. I am trying to do the update like I have done previously through the updater and I keep running into this issue can anybody help and advise what I am doing wrong. Cheers Martin

Hi Kru-x I am fairly new to this so please bear with me i have MariaDB docker running already that my next cloud docker connects to so how do i down load a new MariaDB or do i just add a new path or variable? as when i click on the MariaDB is says reinstall or edit? sorry if this sounds like a stupid question. Cheers Martin

Cheers I will check this out

Hi Guys hopefully you can help with this i am getting a couple of security and set up warnings in my Nextcloudsee below: The "X-Frame-Options" HTTP header is not set to "SAMEORIGIN". This is a potential security or privacy risk, as it is recommended to adjust this setting accordingly. The "Strict-Transport-Security" HTTP header is not set to at least "15552000" seconds. For enhanced security, it is recommended to enable HSTS as described in the security tips ↗. how do I resolve these? Thank you in Advance Martin

Hi Guys Can you please help i have followed Spaceinvaderone video on how to set up Shinobi pro at home. I have a pair of Anran 1080p Wifi enabled cameras on my house which I can view using Ispy connect running in a windows 10 vm however I would like to use them directly through Shinobi Pro for the reasons described in Spaceinvaderonevideo. The problem I have is I can view both cameras with a thumb nail however when when i have clicked on the thumbnail all i get is a blank screen (see attached) has any one got any ideas?