digitalfixer

Bump.

I'm using an IcyDock MB994SP-4S with ssd's. No problems so far. Kevin.

With so much information now available on the dashboard I'm wondering if it would be possible to change the heat alarm line to disk temp and maybe keep the alarm feature by changing the text colour from green to red. One line would then serve two functions. Kevin.

According to the manual it has a usb connector. http://bl831.als.lbl.gov/~gmeigs/PDF/APC_SUA300RMXL3U.pdf Failing that you will need a smart serial cable. Pinout here.http://pinoutsguide.com/UPS/apc_smart_cable_pinout.shtml Kevin.

My guess would be that your holding the share open with what ever is running in the screen command. Kevin.

On the H310 you need to cover pads b5 and b6 with some tape. I have two of these cards and they both caused that problem until I did the tape trick. More information here. http://lime-technology.com/forum/index.php?topic=29236.msg262090#msg262090 http://www.vladan.fr/memory-channel-per-bank-getting-non-active-when-using-perc-h310-contoler-card/ http://yannickdekoeijer.blogspot.co.uk/2012/04/modding-dell-perc-6-sas-raidcontroller.html Kevin

Probably 2400 8N1. Seems to be common for APC serial cables. I tried for a while to get mine working without success. Never figured out how to configure the port within unRaid and then life got in the way. I think these settings are part of apcupsd config. I've never configures a serial port for it before, it just works. Kevin.

You will also need to fill in the device field. Mine is /dev/ttyS0 Kevin.

After going through the manual and the Motherboard manual + a search online it seems that the fans can only be controlled by the bios. Kevin.

I have the plugin installed. This is the output from ipmisensors ID | Name | Type | Reading | Units | Event 1 | CPU1 Temperature | Temperature | 40.00 | C | 'OK' 2 | CPU2 Temperature | Temperature | 53.00 | C | 'OK' 3 | TR1 Temperature | Temperature | 58.00 | C | 'OK' 4 | TR2 Temperature | Temperature | 58.00 | C | 'OK' 12 | +12V | Voltage | 11.71 | V | 'OK' 13 | +5V | Voltage | 4.99 | V | 'OK' 14 | +5VSB | Voltage | 4.99 | V | 'OK' 15 | +3.3V | Voltage | 3.31 | V | 'OK' 18 | CPU_FAN1 | Fan | 640.00 | RPM | 'At or Below (<=) Lower Non-Recoverable Threshold' 19 | CPU_FAN2 | Fan | 640.00 | RPM | 'At or Below (<=) Lower Non-Recoverable Threshold' 20 | FRNT_FAN1 | Fan | 640.00 | RPM | 'At or Below (<=) Lower Non-Recoverable Threshold' 21 | FRNT_FAN2 | Fan | 640.00 | RPM | 'At or Below (<=) Lower Non-Recoverable Threshold' 23 | FRNT_FAN4 | Fan | 640.00 | RPM | 'At or Below (<=) Lower Non-Recoverable Threshold' 24 | REAR_FAN1 | Fan | 640.00 | RPM | 'At or Below (<=) Lower Non-Recoverable Threshold' Under Settings/Fan Control Fan Settings says Your board is not currently supported Kevin

What information would you need to add an Asus Z9PA-D8 with a ASMB6 iKVM module installed. I have a manual with what I assume is a complete sensor table list. Kevin.

I've just done a clean install of 6.1.9 on my second flash drive and this is the output from make_bootable_mac. Is the Operation not permitted line important. INFO: make_bootable_mac v1.1 INFO: The following drive appears to be the unRAID USB Flash drive: /dev/disk2 UNRAID 4.0GB To continue please enter your admin Password: INFO: Unmounting /dev/disk2 Forced unmount of all volumes on disk2 was successful INFO: Writing MBR on /dev/disk2 0+1 records in 0+1 records out 447 bytes transferred in 0.001003 secs (445651 bytes/sec) INFO: Mounting /dev/disk2 Volume(s) mounted successfully syslinux for Mac OS X; created by Geza Kovacs for UNetbootin unetbootin.sf.net "/dev/disk2s1" unmounted successfully. /dev/disk2s1 DOS_FAT_32 /Volumes/UNRAID mountpoint is /Volumes/UNRAID checkpoint1 checkpoint1.5 checkpoint1.55bad checkpoint1.6 /Volumes/UNRAID/ldlinux.sys ldlinuxname /dev/disk2s1: Operation not permitted INFO: the unRAID USB Flash drive is now bootable and may be ejected. logout Saving session... ...copying shared history... ...saving history...truncating history files... ...completed. Deleting expired sessions...162 completed. Kevin.

I'm thinking about getting one of these just to add a couple of extra 6Gb ports. https://www.scan.co.uk/products/silverstone-pci-express-card-2x-sata-6-gbps-ports-supports-raid-0-raid-1-span-and-non-raid-function It says it has this controller ASMedia 1062R. Just wondering if the drivers are already in the kernel or if its even supported. Kevin.

Thanks gert. Picture made my mind up as I also have a Define case. Kevin.

Finally jumped on this train just so I could throw more cores at my vm,s MB Asus Z9PA-D8 CPU (2x) Intel Xeon E5-2670 SR0KX CPU 2.6GHz Eight Core Processor Ram 64GB (8x8GB) PC3L-10600R DDR3 Dell PowerEdge R410 Server Memory RAM Upgrade What coolers would people recommend for this MB. Kevin.

You can set up a master/slave between the two machines. It's all explained in the apcupsd manual. Kevin.

The beauty of having your system in the sig. Would cut out a lot of questions. Kevin.

As far I remember that is a setting in your bios. Kevin.

What are the steps required to replace a failing 3TB drive with a 4TB drive. Kevin.

Thank you for the fast reply. Kevin.

It is Server/Client configuration. How to is in the apcupsd manual. http://www.apcupsd.org/manual/manual.html Kevin.

Is there any problems with preclearing 6TB drives in a setup that currently has 4TB parity. These are going to be replacement parity drives. Kevin.

Modbus is the replacement for APCSmart. It's used on newer APC units. Kevin.

Are you setting it up via the UPS settings. I have mine on a modbus cable and it just works. Kevin.

Big thanks goes to archedraft. ;D Followed the guide and now have 10.11.5 vm working perfectly. Kevin.