digitalfixer

10GB Cache Only Crashplan & PlexMediaServer Docker image is separate. Kevin.

Tried with the array running and clean boot with array stopped. I'm going to leave it now until after boxing day then have a good look at my bios settings for usb related stuff and install a 2 port pci-e usb card. Hopefully something will work so I can get the bluray drive working on my kvm. I'll follow up with anything I find. Kevin.

archedraft That was the first chunk in my code list. root@Tower:~# lspci|grep USB 00:14.0 USB controller: Intel Corporation Lynx Point USB xHCI Host Controller (rev 05) 00:1a.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host Controller #2 (rev 05) 00:1d.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host Controller #1 (rev 05) Kevin.

I've followed the guide and the results make no sense in that every socket is coming back as bus 003. The Lexar is the usb stick I used to move around. If I plug it back in a port I've already listed the Device number goes up by 1 [Edit] This was done with the array running and clean boot, array stopped. The results were the same. Kevin. p9d-m usb ports root@Tower:~# lspci|grep USB 00:14.0 USB controller: Intel Corporation Lynx Point USB xHCI Host Controller (rev 05) 00:1a.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host Controller #2 (rev 05) 00:1d.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host Controller #1 (rev 05) root@Tower:~# lsusb Bus 002 Device 002: ID 8087:8000 Intel Corp. Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:8008 Intel Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 003: ID 0781:5571 SanDisk Corp. Cruzer Fit internal socket Bus 003 Device 007: ID 046b:ff31 American Megatrends, Inc. Bus 003 Device 006: ID 046b:ff40 American Megatrends, Inc. Bus 003 Device 005: ID 046b:ff20 American Megatrends, Inc. Bus 003 Device 004: ID 046b:ff10 American Megatrends, Inc. Virtual Keyboard and Mouse Bus 003 Device 002: ID 046b:ff01 American Megatrends, Inc. Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub root@Tower:~# lsusb Bus 003 Device 003: ID 0781:5571 SanDisk Corp. Cruzer Fit Bus 003 Device 008: ID 05dc:a440 Lexar Media, Inc. JumpDrive Lightning front usb2 left root@Tower:~# lsusb Bus 003 Device 003: ID 0781:5571 SanDisk Corp. Cruzer Fit Bus 003 Device 009: ID 05dc:a440 Lexar Media, Inc. JumpDrive Lightning front usb2 right root@Tower:~# lsusb Bus 003 Device 003: ID 0781:5571 SanDisk Corp. Cruzer Fit Bus 003 Device 010: ID 05dc:a440 Lexar Media, Inc. JumpDrive Lightning front usb3 (single socket) root@Tower:~# lsusb Bus 003 Device 003: ID 0781:5571 SanDisk Corp. Cruzer Fit Bus 003 Device 011: ID 05dc:a440 Lexar Media, Inc. JumpDrive Lightning rear usb2 bottom root@Tower:~# lsusb Bus 003 Device 013: ID 05dc:a440 Lexar Media, Inc. JumpDrive Lightning rear usb2 top Bus 003 Device 003: ID 0781:5571 SanDisk Corp. Cruzer Fit root@Tower:~# lsusb Bus 003 Device 003: ID 0781:5571 SanDisk Corp. Cruzer Fit Bus 003 Device 014: ID 05dc:a440 Lexar Media, Inc. JumpDrive Lightning rear usb3 bottom root@Tower:~# lsusb Bus 003 Device 003: ID 0781:5571 SanDisk Corp. Cruzer Fit Bus 003 Device 015: ID 05dc:a440 Lexar Media, Inc. JumpDrive Lightning rear usb3 top root@Tower:~# ls root@Tower:~# readlink /sys/bus/usb/devices/usb1 ../../../devices/pci0000:00/0000:00:1a.0/usb1 root@Tower:~# readlink /sys/bus/usb/devices/usb2 ../../../devices/pci0000:00/0000:00:1d.0/usb2 root@Tower:~# readlink /sys/bus/usb/devices/usb3 ../../../devices/pci0000:00/0000:00:14.0/usb3 root@Tower:~# readlink /sys/bus/usb/devices/usb4 ../../../devices/pci0000:00/0000:00:14.0/usb4 root@Tower:~#

New error on KVM page after updating the plugin. Warning: parse_ini_file(/boot/config/domain.cfg): failed to open stream: No such file or directory in /usr/local/emhttp/plugins/dynamix/include/DefaultPageLayout.php(274) : eval()'d code on line 8 Kevin Edit: trurl noted what I missed out.

I would probably class this as a bug. I created an empty machine, i.e. no install iso was defined so there was nothing to boot from. The disk and xml were created with no error but then the empty machine was started. Only force domain to shutdown would stop it. If there is no install iso defined and create disk is selected would it not be better to just create the machine and not start the domain. Kevin.

If I remember the way I fixed it was to remove the S3 plugin via the webgui and delete dynamix.cfg. Then I rebooted and in settings select Display Settings and clicked Apply. Reinstalled the S3 Sleep plugin and all was fine after that. My initial error was that no Sleep button ever displayed but that fixed it. Also this line does not appear in my dynamix.cfg. [confirm]\nsleep="1"\n Kevin.

It works fine for me. More information on how it breaks would be useful then I'm sure someone will have an answer. Kevin.

Make a new dir in /boot called Extra. If it already exists skip that step. Download from a slack site the following files. screen-4.0.3-x86_64-4.txz libutempter-1.1.5-x86_64-1.txz Put them both in Extra and either reboot the server or install using installpkg. Kevin.

There was a post on the forum about the same problem plus I found a couple of instances on other sites. http://lime-technology.com/forum/index.php?topic=29236.msg262090#msg262090 http://www.vladan.fr/memory-channel-per-bank-getting-non-active-when-using-perc-h310-contoler-card/ http://yannickdekoeijer.blogspot.co.uk/2012/04/modding-dell-perc-6-sas-raidcontroller.html Because I couldn't find any explanation of why this should happen I didn't leave the card in my server. I'll probably keep it as a spare incase my M1015 fails. Kevin.

This one is very weird. I bought a Dell H310 to use as a spare HBA. It flashed to LSI P19 IT with no problems and UNRAID is happy with it. All the drives are shown. The problem is one memory slot becomes empty, therefore I lose 8GB of ram. If I reinstall the M1015 both memory slots report have 8GB. If I can't use it as a spare how would I flash it back to the Dell firmware. Kevin. [Edit] I solved it by covering pins B5 & B6 on the card.

The number is exactly 20GB. It's part of the confusion between SI units and IEC units. SI is power of 10, IEC is power of 2. When I create or change the memory on my vm's I use the SI unit and the xml returns with the IEC unit equivalent. See the information here http://www.dr-lex.be/info-stuff/bytecalc.html Kevin.

I can't refresh or delete a storage pool. Path is /mnt/cache/vm/media Permissions are nobody.users -rw-rw-rw- Kevin.

This is only cosmetic but it looks like a couple of variables got mixed up. See image. Kevin. Moderator edit: change icon

Updated S3 sleep plugin. Still no sleep button on Array Operation. dynamix.cfg [display] date="%c" number=".," scale="-1" align="right" tabs="0" text="0" view="" total="1" spin="1" usage="0" icons="1" banner="" theme="white" unit="C" hot="45" max="55" poll="0" refresh="1000" sysinfo="/Tools/SystemProfiler" [confirm]\nsleep="1"\n Kevin.

Bonienl I modified the dynamix.cfg file and added the key. The sleep button is now displayed. Kevin.

Please remove the DockerMan plugin under the Plugins tab. It's no longer needed (and actually causing a conflict). Thank you. Working ok now. Kevin.

It seems that the update to the webGui has broken the docker plugin. Unable to start any of my installed containers. The Docker page now looks like the image. Kevin [Edit] All the status/log pages return blank.

I just disabled page refresh and now the file looks normal again. Kevin.

dynamix.cfg now looks like this. sleep="1" [sleep] sleep="1" [display] sleep="1" date="%c" sleep="1" number=",." sleep="1" scale="-1" sleep="1" align="right" sleep="1" tabs="0" sleep="1" text="0" sleep="1" view="" sleep="1" total="1" sleep="1" spin="1" sleep="1" usage="1" sleep="1" icons="1" sleep="1" banner="" sleep="1" theme="white" sleep="1" unit="C" sleep="1" hot="45" sleep="1" max="55" sleep="1" poll="0" sleep="1" refresh="60000" Kevin.

I tried this. Nothing about sleep appears under Display settings. Kevin. Before uninstall/install did you save display settings ? Yes. Kevin.

Can you try the following: 1. Goto Settings -> Display Settings and press Apply (this saves settings to the flash memory) 2. Uninstall and re-install S3.sleep plugin, after installation, it should add a "sleep" key to the file created in step 1 3. Sleep button should now be visible I now have sleep="1" in the config file but no button on the display. Kevin.

bonienl No. The plugins I have installed all have their own dir. Kevin.

I've installed the new S3 sleep plugin but no sleep button is shown on the Array Operation tab. Kevin

c3 I've had no problems with drives in the 3 years the server has been running. CRC errors happened after the P20 update. Went back to P19 and all is well again so I don't think it's anything to do with cabling. Kevin.