Jump to content


  • Content Count

  • Joined

  • Last visited

Everything posted by Nanobug

  1. I just Lastpass for free right now. For one user with a bazillion passwords and accounts, you don't need more than the free account. I'm not even missing out or is bothered by anything. I'll look at Bitwarden though. Thanks!
  2. I use Nginx Proxy Manager and Nextcloud as well. I've looked at Bitwarden for a password manager, but I don't know if it's any better than Lastpass. I might take a look at it more closely. I did look at a YouTube DL at some point, but I didn't get it to work, so I didn't do more with it. It's not like I need it a lot, I can just go on YouTube and see/listen to it anyway. Airsonic might be useful, but I just listen to Spotify anyway, so I don't know. Matix I don't really need, I think. I tried to look it up, but I didn't find it. I found a lot about Matrix enctyption though. Do you have a link for Matix? I don't know about Xbackbone, it sounds cool from what I can tell. I use Snagit right now. I don't really have a huge need to upload my screenshots, but I guess it would be cool in some cases.
  3. I didn't look at the log. I just didn't know where it was.
  4. I use mine for a media setup as well. For that I've got: Plex Tautulli Ombi Jackett Sonarr Radarr Deluge I've got Rocket.Chat with MongoDB setup, Nextcloud with OnlyOfficeDocumentServer and mariadb, netdata (looking for a replacement for that), Krusader, pihole and NGINX Proxy Manager. I've also set up a LANCache which I don't use since I have 500/500 mbit internet, so I can't squeeze much more out of it. I have a multi-streaming docker setup up so I can send it to Twitch, YouTube and Facebook at the same time, or just multiple channels of the same site. I've got a streaming docker to handle the transcode. I don't need the UniFi controller since I have a UDM and it's built into that. Î've looked at Home Assistant, but I don't really have any Smart Home deviced to hook it up for yet. I have a bunch of apps pinned that I'm looking at regularly and setting up nice and slowly when I have time for it.
  5. I'm almost happy with the sonarr/radarr setup now. I'm trying to make it grab the content automatically after it's been approved on Ombi. It only goes into monitored state on sonarr/radarr, but doens't do more than that.
  6. I found a solution around the same time you wrote it. I'm not using let's encrypt like he does. I'm using NGINX Proxy Manager which has let's encrypt built into it. And while I was doing another thing, I noticed it had a text saying "enable websocket". And I just had to enable it right there. Thank you anyway though
  7. I forgot to say that I've already looked there. When you're new, like me, I don't always know what it does, even when there's a short description.
  8. Hello unRAID forums I'm still fairly new at unRAID and the world of Linux. I'm always looking for things there could be useful for my setup, but I don't know where to look for them. I just stumble upon them randomly. Is there a place to get inspiration for things like that?
  9. I already use them, and I'm 95 % happy. I'm just having some "issues" I can't figure out.
  10. I managed to fix it on Plex. I still can't get Sonarr to correct it.
  11. Hello unRAID people. I'm having an issue I can't figure out how to solve, I don't know exactly where the issue is. I'm using Ombi where my Plex user request content. When I click "approve" it should sent it to Sonarr/Radarr for grabbing it. But I don't know why it doesn't do it. I can go to Sonarr/Radarr and see it has been added, to the watch list. But it doesn't do more than that. It's also supposed to make a copy of the grabbed content, and put it in the Plex folder. It doens't do that either. Can you help me troubleshoot and fix it? I don't know exactly where to start.
  12. Hello unRAID people. I've got the docker installed, tested it works like a charm. But I'm having an issue I can't figure out how to solve. I've installed the Rocket Chat app on my Android phone, but I can't connect to the workspace for it before I've enabled the Websocket. I'm not quite sure what it is, I've read about it needs NGINX, I have the NGINX Proxy Manager, but I can't seem to find what I need. Can anyone help?
  13. My issue is that there's 2 index searchers, since I'm Danish, and apparently it can confuse itself between English and Norwegian language or something (a Danish guy explained it somewhere), so I have to click "automatically search" for it to grab things. It still makes my life easier, but it's not always the same profile search I have to use, which is a bit annoying. I'll have a look when I get home again on using in on tvdid. A bit off topic: Can you force Plex to do the same?
  14. Also, can you correct sonarr? It found a TV show called "History 101", which is this show: https://www.thetvdb.com/series/history-101 It thinks its "HIStory", which is a COMPLETELY different show: https://www.thetvdb.com/series/history
  15. Thanks. I just wanted more info on it as well, so I could make a proper decision. It works, somewhat now. I have a bunch of questions though. Does it automatically grab new episodes of lists that I've set it to monitor? And what if I start on a new show, will it automatically start grabbing that as well? What about grabbing a whole season of a show, can it do that?
  16. Hello unRAID community. I've been looking at the things in the title. First of all, I can't decide what's the best use, and I can't find out much about them so I can tell if there's a noticeable difference. So the first question is. What is "best" (I know it's relative) to use? Best for me, is not necessarily the most advanced features. I just need a solution that works. Second questions is. Where can I find a proper guide and/or information to set it up? What I've found so far, doesn't really fulfill a proper setup. Can you help, or point me in the right direction?
  17. Sorry for the late reply, busy day and weekend. That explains it quite well, thank you, testdasi!
  18. Hello unRAID forum. I looked through the documentation, and looked through the forum. But I didn't find anything, I might have searched for the wrong thing, so that might be why. I still didn't found what I was looking for. I have 2 disks in my current unRAID system: A 1 TB drive. A 4 TB drive. The 4 TB drive is at 94 % utilization right now, and the 1 TB drive is at 51 %. It started to fill up the 1 TB drive when the 4 TB drive was around 80 % i think. I've seen or heard somewhere that there is certain percentages it hits before it starts filling up the next drive. So my question is, what are those percentages, and where can I read more about it, and is there a place or thread where I can find more information about unRAID in general?, other than the official documentation?
  19. That sounds really good! How can I hear about it when there's news about it?
  20. So.. The server does not do the transcoding work? It only distributes it to multiple platforms?
  21. If there was a hidden character, and it worked after after adding the comment line, shouldn't the result have been the same then? Another thing, and this is probably on me. Can you make it stream to a remote server? For example: Can my brother send the transcoding work to my server over the internet? I tried port forwarding it, but I wasn't successful with it. I'm not sure how to make it work exactly. Any ideas?
  22. I'm still new to unRAID and Linux in general, so take my response with a grain of salt. All I did to make it work, was using the Wordpress and mariadb docker, so most things are in the Wordpress docker, and it saves it in the mariadb. I don't know what version it's using, but accordingly to WhatRuns (Chrome extension), it's this:
  23. Hello. I just wanted to put a pointer out to people who might need it when they can't get it to work. I've been on this constantly for over 3 hours now. If you're sure your NPM works, then remove mariadb and Wordpress including the files (you can use Krusader for that), then install mariadb and WordPress again. Just take your time to install and configure everything. Write down, or open a text editor and type IP's, ports, usernames, password and database names down, all information you've created in one way or another, and then slowly progress, and you'll get there.
  24. I agree. It makes no sense, but that's how I got it to work.
  25. I found my issue. The blog post said: user nginx; worker_processes auto; rtmp_auto_push on; events {} rtmp { server { listen [::]:1935; chunk_size 4096; application live { live on; record off; push 'rtmp://live-atl.twitch.tv/app/<yourTwitchStreamKey>'; } } } But the picture had this: user nginx; worker_processes auto; rtmp_auto_push on; events {} rtmp { server { listen [::]:1935; # ipv6only=off; chunk_size 4096; application live { live on; record off; push 'rtmp://live-atl.twitch.tv/app/<yourTwitchStreamKey>'; } } } So I had to add this line: # ipv6only=off; before it worked. I don't know if anyone else had the same issue. But this was how I solved it at least.