HellraiserOSU

Members
  • Posts

    63
  • Joined

  • Last visited

Everything posted by HellraiserOSU

  1. Oh God I did.. I can't remember what I did.. I know I changed to MS SQL Server as the database... I think that was part of it.. I can't remember and searching my one note docs, I didn't write anything down sorry. If I remember I'll let you know
  2. I have not sorry. I'm not AS worried about it now since we don't go out as much so I only use Plex when we are out of the house and use Kodi for when we are inside and just do direct play. All my TVs have NVIDIA Shields so they can play pretty much anything as is. I only have a single GPU in my setup not counting the intel GPU. I can try to put in a GTX 980. I'll have to see if I can find the extra power cable and try that.. or the RTX 3080.. but I'm guessing i'll run into the same thing
  3. Persistence mode? What is that? I am booting in Legacy. Hardware transcode... it say in Plex it's using hardware transcoding even if it's not finding the NVIDIA card.. I'm a developer and I do hardware.. I'm used to things not working at times when they do so I just smile and move on
  4. I didn't touch the UI until this morning. Went through the logs and saw nothing out of the ordinary. As soon as I clicked on NVIDIA Driver in the plugins No devices found. RmInitAdapter failed! appears in the logs. I'm about ready to give up
  5. OK right now i have the monitor attached to the NVIDIA card.. iGPU is set as primary in the graphics card.. I rebooted and so far it's OK.. i have a feeling it isn't because of plugging into the HDMI but I could be wrong, I also removed gpu statistics plugin. It seemed after I booted up if I go to the Dashboard or NVIDIA plugin page it would do that init fail message.. so far so good but we'll see
  6. It is booting in Legacy mode. It worked i think for a day before.. I wasn't really monitoring it.. I own a 750W power supply. Nothing in a second PCIe slot No monitor attached.. it's headless. When I do plugin a monitor it's in the motherboard HDMI plug to use the intel GPU.
  7. Well I thought it was fixed, but now it's back to this. Server hasn't been rebooted in 3 days.. Guess will keep digging Edit - did a server reboot and it appeared in the installed GPU for a second and then it goes with the RmInitAdapter failed errors.
  8. Yup seems so.. Plex says hardware decoding and the gpu statistics show everything and the plex icon when plex is running. Welcome and thank you as well!
  9. If you want to play the original, Prelude is the one you want to start. The docker config will let you set what module it loads up initially. After that the save file takes over.
  10. i MAYBE got it. In the Bios there was a PCI device mode and it was at UEFI .. changed it to Legacy .. There was other areas that let you change either UEFI and Legacy mode and they were all in Legacy mode except for this one. Now, I am not getting the RMIInitAdapter failed error So, hopefully this is it.. Thanks for your help!
  11. Here's a new one after a reboot cybertron-diagnostics-20210708-0653.zip
  12. Yeah sorry edited my original response to say it was Skylake. I have another server here running a i7-2700k so got mixed up I'll look to reset the BIOS
  13. Oh haha my bad Oh it's Skylake.. Running an i7-6700k. I had a GeForce RTX 1660 in there before working fine and removed it and changed it to a GeForce RTX 3060. Legacy mode is a no go as well.
  14. So I've replaced the card in the system a few times. And I would hope it's not a counterfeit because I got it straight from eVGA Do you think the issue is because I've replaced it with a different card? Removed any script that runs on array start and still seeing no device found. It is in UEFI mode. So i rebooted and in lspci.txt I see 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GA106 [GeForce RTX 3060] [10de:2503] (rev a1) Subsystem: eVga.com. Corp. Device [3842:3655] Kernel driver in use: nvidia Kernel modules: nvidia_drm, nvidia 01:00.1 Audio device [0403]: NVIDIA Corporation Device [10de:228e] (rev a1) Subsystem: eVga.com. Corp. Device [3842:3655]
  15. Gosh it's been so long since I did this. I want to say yes I just renamed them and made the extensions .mod . I'd say try that and see. I will say I now have these files as a backup in case I need to ever do it again. Hope it works!
  16. I have it copied into my nwn/Neverwinter Nights/modules folder
  17. Hey Sorry! I was away. So I turned on the Above 4G Decoding.. still doesn't work.. Here's my diagonstic log.
  18. I'm having an issue where my card appears for a little bit and then disappears. It's an EVGA GeForce RTX 3060 and on the plugins it'll show the driver version and the Installed GPU fine after I reboot. After I check it and refresh the page, it's gone and says No devices found. I don't have a VM I do see in the logs NVRM: GPU 0000:01:00.0: RmInitAdapter failed! (0x23:0xffff:1199) NVRM: GPU 0000:01:00.0: rm_init_adapter failed, device minor number 0
  19. Yup it's pulling the binaries! Thanks and have a great weekend!
  20. Hello! For the Neverwinter Nights docker, I'm now getting this when trying to start ---Starting MariaDB...--- ---Starting Redis Server--- ---NWN:EE Binaries not found, installing v!--- ---Something went wrong, can't download NWN:EE Binaries, putting server in sleep mode--- Any ideas on what is wrong? Thanks!
  21. I just tried a brand new install of the image, pointed it to my mariadb and a new database instance, pointed to a new folder so a pretty clean install. It's now giving me a 502 gateway timeout when i go to the webui and i can't restart my docker service. I'm pretty sure if i try to restart my server it'll just spin on trying to stop the docker service. I was able to login and see nextcloud UI and go through it. About an hour or so later I can't access it. I didn't install any apps and just wanted to see if a clean install would do the same thing. I wonder if my phone hitting it is causing it to time out. Either way, I'l try a different nextcloud docker image to see if I get the same issues.
  22. It's an Intel All my dockers are either bridge or the custom proxynet i setup for reverse proxy So after a few days and keeping nextcloud off, my Unraid server is fine. I am able to reboot no problem and I am able to stop and start the docker service whereas before, Nextcloud would lock that up and not let me restart the docker service.
  23. Yes if the nextcloud container gets into this state, I can't restart the server. If I can restart the nextcloud container, I can restart the server I'll leave it off for the next few days, but I've found this thread as well that doesn't seem to have a solution
  24. Nextcloud is the only container that dies.. Everything else is operational. My VMs, my other dockers.. I can access everything else. I just restarted the other containers above and below and are still able to access it Nextcloud just spins or gives me an error when i try to pause it