• Posts

  • Joined

  • Last visited

Everything posted by Turnspit

  1. I'm trying to run this docker in a custom bridge network in conjuction with your mariadb docker. At first I tried running both dockers in the same custom br0, this led to a 304 error starting the second docker though (is this not possible). Running the Nextcloud docker in a custom br0 and the mariadb docker in default bridge mode, Nextcloud is unable to connect to the database. So far the only possible config of running this setup is running them both in bridge mode. Is there any workaround for this?
  2. I'm not quite sure if I'm really understanding your question... Externally (for your router), the exposed ports are always running to the IP address of your Unraid-Server, and are then either passed through (in case of a Bridge or custom-br network setup) or run directly to the docker (in case of aHost network setup).
  3. A little bit off-topic - may I ask how you set up specific Containers to send their logs elsewhere?
  4. Hi! Quick question: Is it possible to store the logs of a single docker to a specified folder on the array or cache? Preferably configured in the docker template itself? Thanks in advance! ๐Ÿ™‚
  5. After every lockup, I removed the docker including its image as well as the appdata folder. Since I could still access the logs after the lockup, I just reinstalled the docker with default values again, in hopes to check the logs for any insights. Lo and behold, so far it seems to be running stable (although quite slow compared to my installation on a Raspberry). Which is strange, because I also had those lockups in the beginning using the default settings of the Template. Anyways, I will continue monitoring the Docker behaviour while setting up Email notifications. Thanks again for your support, ich!
  6. FIrst of all, sorry for the double-post. Had a look at Prometheus (as suggested), but due to my long history with it, Checkmk is still the way to go for. I tried the whole morning getting the docker for it to work - pulling different versions, playing around with extra parameters, different paths, UID/GID settings, ... Nothing worked. After 1-2 minutes, the Checkmk docker gets errors that it is unable to retreive any data and locks up, pulling the whole system with it. I can't even download Diagnostics anymore and have to hard-reset the server to get it running again. I'm currently running Checkmk in a VM, which works fine, but I would just like to migrate to Docker, already having set up a Postfix docker for it as well. Is there any way to troubleshoot my problems with this Docker and maybe find a solution?
  7. Thanks for the info Squid. ๐Ÿ™‚ Since this specific Docker image is pulling all its relevant informations from env-variables, this shouldn't be a problem. Still wondering though - I tried mounting /etc to a folder in /appdata, and while the were some files created, some curcial files were missing (or not created) and postfix had problems starting and terminated after a couple of tries. For example: postconf: fatal: open /etc/postfix/main.cf: No such file or directory
  8. Cheers everyone! As a total Docker Noob, I'm in the process of setting up a SMTP Relay Docker (https://hub.docker.com/r/juanluisbaptiste/postfix/). I've successfully set it up, and it's working just fine out of the box, BUT: I didn't set any data path. Reading the logs, Postfix is reading files in /dev/ as well as /etc/postfix. Where are those files stored, directly inside the image? Is it okay to keep it like this, or would it be best practice to mount those paths to an appdata folder? Thanks in advance!
  9. Dang, you are blazing fast, awesome! ๐Ÿ™‚ Works like a charm, thanks a ton!!!
  10. A question regarding the TS3 docker: Is it possible to (auto)-start the TSDNS service, and if so, how? My goal is to make my server reachable via only a single subdomain. Thanks! ๐Ÿ™‚
  11. Maybe have a look at this solution? https://askubuntu.com/questions/789602/auto-delete-files-older-than-7-days
  12. Thanks ChatNoir! There was indeed an (empty) appdata folder on the unprotected NVME-cache, which is why I didn't see any of the subfolders in an incorrect place and UnRAID still showed the share to be unproteed. Deleted the folder, everything's fine now. ๐Ÿ™‚ Thanks!
  13. Cheers! I have a teeny tiny problem with my appdata share. UnRAID shows it to be partially unprotected, despite all folder sitting on a mirrored SSD-cache. Is this just some kind of GUI bug, with a way to fix it? Thanks in advance! ๐Ÿ™‚ homeserver-diagnostics-20210922-0949.zip
  14. Hm, might be a good idea, will have a look at it! After having to pull the plug from the server to get it to reboot and remove the docker, I installed the default 1.5 version, which still resulted in a hang after a few minutes and another hard reset. Strange...
  15. Thanks for the fast response ich777! And a fair warning - tried the latest 2.0 nevertheless, and it locked up my server... can't stop and/or delete the checkmk docker or pretty much do anything else other than navigating the WebUI...
  16. Your checkmk-RAW docker is running on version 1.5.something, while there's already 2.0 out for a while (also as docker). Is there a way to update to the latest version? Thanks! ๐Ÿ™‚
  17. For me, the notification script does not seem to work. Running it as a background task right after finishing up the Docker installation, it tells me that MacOS is ready to install and I shall run the helper script (resulting in an error trying to start the VM).
  18. Did you also edit the ROM file downloaded? https://forums.serverbuilds.net/t/guide-remote-gaming-on-unraid/4248/6 See 6.7.
  19. Try adding the GPUs ROM to fix the Code 43. ๐Ÿ™‚
  20. There's also Tailscale Dockers for UnRAID and it does not seem to need any port forwarding, similar to ZeroTier... So you could give it a try.
  21. Well, without the option of forwarding any port, your only chance of remote access that comes to my mind spontaneously would be Zero Tier. There's also a Docker container for UnRAID.
  22. I'm also using multiple Raspberrys and Ubuntu machines, and all of them mount fine using cifs and /etc/fstab. Have a look here for reference: https://wiki.ubuntu.com/MountWindowsSharesPermanently
  23. I've noticed (don't exactly know since when) that I can't stop my VMs anymore from the UnRAID-GUI, only Force-Stop works. VMs that are running: Windows 10 Windows Server 2019 Ubuntu Server (x3) Same problem with all of them. What is the difference anyway between Stop and Force-Stop? Thanks in advance! ๐Ÿ™‚ homeserver-diagnostics-20210816-1056.zip
  24. This could maybe be a faulty config of the DNS or Gateway address on your UnRAID machine. From terminal on UnRAID: cat /etc/resolv.conf (show currently used DNS servers) route -n (show Gatway address) If you have set a static IP address inside UnRAID, you could also try switching to automatic assignment and see if it works.