MCT Posted December 18, 2020 Share Posted December 18, 2020 Hi, is anyone else having problems after updating? It has been working perfectly forever before this update. Only disk 4 is showing a temp, * is showing for the rest. They are all WD shucked drives. Quote Link to comment
itimpi Posted December 18, 2020 Share Posted December 18, 2020 Have you tried spinning the drives up first? It is expected to get * in that column if the drives are currently spun down. Quote Link to comment
MCT Posted December 18, 2020 Author Share Posted December 18, 2020 (edited) 1 hour ago, itimpi said: Have you tried spinning the drives up first? It is expected to get * in that column if the drives are currently spun down. Yes all drives are spun up. I've been watching these temps for 2 days as it's hot here. Has never showed anything except disk 4 and cache since updating. Which may or may not be the issue, but I do watch temps regulary Edited December 18, 2020 by MCT added photo Quote Link to comment
MCT Posted December 18, 2020 Author Share Posted December 18, 2020 Rolling back to Version: 6.9.0-beta35 fixes it, so it's a problem with rc1. Where should I report? Quote Link to comment
SimonF Posted December 18, 2020 Share Posted December 18, 2020 (edited) What output do you get from smartctl -A /dev/sdX on RC1? You should have Tower emhttpd: read SMART /dev/sdX in logs for new process that gets temps. Edited December 18, 2020 by SimonF Quote Link to comment
JorgeB Posted December 18, 2020 Share Posted December 18, 2020 You can create a bug report, don't forget to include the diags. Quote Link to comment
Mkultra Posted December 18, 2020 Share Posted December 18, 2020 I have the same problem! anyone figured out a way to fix this? I've tried smartctl '-A /dev/sdX' and i get a message back telling me smart status is enabled.. however when i go into the hdd settings it tells me this: SMART support:Available - device has SMART capability. SMART support:Disabled Very confused! Quote Link to comment
SimonF Posted December 18, 2020 Share Posted December 18, 2020 You should see something like this from smartctl root@Tower:~# smartctl -A /dev/sdl smartctl 7.2 2020-12-06 r5127 [x86_64-linux-5.9.13-Unraid] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF READ SMART DATA SECTION === SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 111 099 006 Pre-fail Always - 31106221 3 Spin_Up_Time 0x0003 096 095 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 098 098 020 Old_age Always - 2679 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 084 060 030 Pre-fail Always - 319821469 9 Power_On_Hours 0x0032 099 011 000 Old_age Always - 953 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 21 12 Power_Cycle_Count 0x0032 098 037 020 Old_age Always - 2334 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 099 000 Old_age Always - 4 189 High_Fly_Writes 0x003a 001 001 000 Old_age Always - 6820 190 Airflow_Temperature_Cel 0x0022 073 046 045 Old_age Always - 27 (Min/Max 26/28) 194 Temperature_Celsius 0x0022 027 054 000 Old_age Always - 27 (0 13 0 0 0) 195 Hardware_ECC_Recovered 0x001a 052 045 000 Old_age Always - 31106221 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 1 root@Tower:~# smartctl -A /dev/sdi smartctl 7.2 2020-12-06 r5127 [x86_64-linux-5.9.13-Unraid] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF READ SMART DATA SECTION === Current Drive Temperature: 30 C Drive Trip Temperature: 68 C Accumulated power on time, hours:minutes 41986:57 Manufactured in week 37 of year 2014 Specified cycle count over device lifetime: 10000 Accumulated start-stop cycles: 323 Specified load-unload count over device lifetime: 300000 Accumulated load-unload cycles: 2035 Elements in grown defect list: 0 root@Tower:~# Quote Link to comment
JorgeB Posted December 19, 2020 Share Posted December 19, 2020 Retest with rc2, there are some related fixes. Quote Link to comment
Mkultra Posted December 19, 2020 Share Posted December 19, 2020 Tried RC1 and couldnt get any hdd temps.. Tried RC2, now getting hdd temps when spinning up/down the drives on array but can get no temp on either the cache or flash. Cannot get SMART enabled on cache either. restoring to 6.8 for now. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.