ich777 Posted March 31, 2021 Share Posted March 31, 2021 24 minutes ago, olehj said: I have everything squeezed inside the Dockerfile, but I think I'll manage to shrink and add this in as well You can't run this through the Dockerfile since you have to do this on every start/restart and the Dockerfile itself is static (more or less). Quote Link to comment
FlamongOle Posted March 31, 2021 Author Share Posted March 31, 2021 1 minute ago, ich777 said: You can't run this through the Dockerfile since you have to do this on every start/restart and the Dockerfile itself is static (more or less). It will be executed more or less as you have it (script file), dockerhub is creating a build now, see if that works through. Quote Link to comment
FlamongOle Posted March 31, 2021 Author Share Posted March 31, 2021 I give up for now, the driver installs and detect versions etc. But nvidia-settings and nvidia-xconfig seems be be separated from the package, and I'm not into compiling these trough docker right now. So I just reverted it to default behavior, so drivers still have to match (at least slightly) Quote Link to comment
RazorX Posted March 31, 2021 Share Posted March 31, 2021 what's it mean when the logs say this and then the docker stops: Failed to initialize NVML: Driver/library version mismatch Quote Link to comment
FlamongOle Posted March 31, 2021 Author Share Posted March 31, 2021 31 minutes ago, RazorX said: what's it mean when the logs say this and then the docker stops: Failed to initialize NVML: Driver/library version mismatch It means I have currently messed it up. Hopefully should be working soon again, and make sure the Nvidia versions matches as stated on the front page. Quote Link to comment
RazorX Posted March 31, 2021 Share Posted March 31, 2021 7 minutes ago, olehj said: It means I have currently messed it up. Hopefully should be working soon again, and make sure the Nvidia versions matches as stated on the front page. thanks, my nvidia drivers are on v460.56 which shows as the latest drivers for me Quote Link to comment
FlamongOle Posted March 31, 2021 Author Share Posted March 31, 2021 3 minutes ago, RazorX said: thanks, my nvidia drivers are on v460.56 which shows as the latest drivers for me Should be 460.67 or else it won't work at all. Make sure you have the latest nvidia package, and maybe it require Unraid 6.9.1. Quote Link to comment
RazorX Posted March 31, 2021 Share Posted March 31, 2021 (edited) 5 minutes ago, olehj said: Should be 460.67 or else it won't work at all. Make sure you have the latest nvidia package, and maybe it require Unraid 6.9.1. i'm on unraid 6.9.1, when i goto the nvidia driver package it says latest = v460.56 how do i update it to v460.67. my graphics card is currently a Quadro K2000 Edited March 31, 2021 by RazorX Quote Link to comment
FlamongOle Posted March 31, 2021 Author Share Posted March 31, 2021 2 minutes ago, RazorX said: i'm on unraid 6.9.1, when i goto the nvidia driver package it says latest = v460.56 how do i update it to v460.67. my graphics card is currently a Quadro K2000 Plugin updates, then refresh the nvidia plugin page? Quote Link to comment
RazorX Posted March 31, 2021 Share Posted March 31, 2021 2 minutes ago, olehj said: Plugin updates, then refresh the nvidia plugin page? ah it wasn't showing an update at first but now it is, i've clicked update and need to reboot my server so we'll see once it's back up and running Quote Link to comment
RazorX Posted March 31, 2021 Share Posted March 31, 2021 (edited) ok the most it would let me update the nvidia drivers too was v465.19.01 and after that i updated the docker and when i start it i get: Persistence mode is already Enabled for GPU 00000000:06:00.0. Using X configuration file: "/etc/X11/xorg.conf". Option "AllowEmptyInitialConfiguration" "True" added to Screen "Screen0". Option "AllowEmptyInitialConfiguration" "True" added to Screen "Screen0 (1)". Option "AllowEmptyInitialConfiguration" "True" added to Screen "Screen0 (2)". Option "AllowEmptyInitialConfiguration" "True" added to Screen "Screen0 (3)". Backed up file '/etc/X11/xorg.conf' as '/etc/X11/xorg.conf.backup' New X configuration file written to '/etc/X11/xorg.conf' Changing power management limit is not supported for GPU: 00000000:06:00.0. Treating as warning and moving on. Unable to init server: Could not connect: Connection refused ERROR: The control display is undefined; please run `nvidia-settings --help` for usage information. if i run nvidia-settings --help in the unraid terminal i get this btw: nvidia-settings: error while loading shared libraries: libX11.so.6: cannot open shared object file: No such file or directory Edited March 31, 2021 by RazorX Quote Link to comment
Natebur Posted March 31, 2021 Share Posted March 31, 2021 7 minutes ago, RazorX said: ok the most it would let me update the nvidia drivers too was v465.19.01 and after that i updated the docker and when i start it i get: Persistence mode is already Enabled for GPU 00000000:06:00.0. Using X configuration file: "/etc/X11/xorg.conf". Option "AllowEmptyInitialConfiguration" "True" added to Screen "Screen0". Option "AllowEmptyInitialConfiguration" "True" added to Screen "Screen0 (1)". Option "AllowEmptyInitialConfiguration" "True" added to Screen "Screen0 (2)". Option "AllowEmptyInitialConfiguration" "True" added to Screen "Screen0 (3)". Backed up file '/etc/X11/xorg.conf' as '/etc/X11/xorg.conf.backup' New X configuration file written to '/etc/X11/xorg.conf' Changing power management limit is not supported for GPU: 00000000:06:00.0. Treating as warning and moving on. Unable to init server: Could not connect: Connection refused ERROR: The control display is undefined; please run `nvidia-settings --help` for usage information. if i run nvidia-settings --help in the unraid terminal i get this btw: nvidia-settings: error while loading shared libraries: libX11.so.6: cannot open shared object file: No such file or directory I’m getting this exact same thing Quote Link to comment
RazorX Posted March 31, 2021 Share Posted March 31, 2021 Just now, Natebur said: I’m getting this exact same thing glad it's not just me Quote Link to comment
FlamongOle Posted March 31, 2021 Author Share Posted March 31, 2021 1 hour ago, RazorX said: glad it's not just me It's a fault happening currently, I am not sure what it is as I have rolled back the docker version I had before I made some changes. It happened to me after a reboot.. not sure if something underlying happened with the nvidia drivers, or if it's something else. Quote Link to comment
RazorX Posted March 31, 2021 Share Posted March 31, 2021 24 minutes ago, olehj said: It's a fault happening currently, I am not sure what it is as I have rolled back the docker version I had before I made some changes. It happened to me after a reboot.. not sure if something underlying happened with the nvidia drivers, or if it's something else. hopefully you can figure it out soon Quote Link to comment
FlamongOle Posted March 31, 2021 Author Share Posted March 31, 2021 5 minutes ago, RazorX said: hopefully you can figure it out soon currently working on it with a glass of rum&coke 1 1 Quote Link to comment
RazorX Posted March 31, 2021 Share Posted March 31, 2021 53 minutes ago, olehj said: currently working on it with a glass of rum&coke updated the docker and tried again and got this: ---Trying to get Nvidia driver version--- ---Successfully got driver version: 465.19.01--- ---Checking Xwrapper.config--- ---Configuring Xwrapper.config--- find: './sys/kernel/slab': Input/output error ---Driver version missmatch, currently installed: v460.39, driver on Host: v465.19.01--- ---Downloading and installing Nvidia Driver v465.19.01--- Changing power management limit is not supported for GPU: 00000000:06:00.0. Treating as warning and moving on. Unable to init server: Could not connect: Connection refused ERROR: The control display is undefined; please run `nvidia-settings --help` for usage information. but unraid says i already have the right version installed: Nvidia Driver Version: 465.19.01 Quote Link to comment
FlamongOle Posted March 31, 2021 Author Share Posted March 31, 2021 Just now, RazorX said: updated the docker and tried again and got this: ---Trying to get Nvidia driver version--- ---Successfully got driver version: 465.19.01--- ---Checking Xwrapper.config--- ---Configuring Xwrapper.config--- find: './sys/kernel/slab': Input/output error ---Driver version missmatch, currently installed: v460.39, driver on Host: v465.19.01--- ---Downloading and installing Nvidia Driver v465.19.01--- Changing power management limit is not supported for GPU: 00000000:06:00.0. Treating as warning and moving on. Unable to init server: Could not connect: Connection refused ERROR: The control display is undefined; please run `nvidia-settings --help` for usage information. but unraid says i already have the right version installed: Nvidia Driver Version: 465.19.01 There's no need to do anything just yet, lots of BS going on in the docker now for troubleshooting Quote Link to comment
RazorX Posted March 31, 2021 Share Posted March 31, 2021 Just now, olehj said: There's no need to do anything just yet, lots of BS going on in the docker now for troubleshooting fair enough Quote Link to comment
FlamongOle Posted March 31, 2021 Author Share Posted March 31, 2021 @RazorX @Natebur Check for docker updates and install the new ones. Please report back if success or not, and which driver you are using. It is supposed to accept whatever driver you choose. I currently made it running again with 460.67 with GTX 1070 + P2000. Quote Link to comment
sWampyGround Posted March 31, 2021 Share Posted March 31, 2021 Does this mean my 1050ti is useless? 16:28:40 cu-0 Using Pci 0000:05:00.0: GeForce GTX 1050 Ti (Compute 6.1) Memory : 3.95 GB 16:28:40 miner Epoch : 405 Difficulty : 4.00 Gh 16:28:46 cu-0 Required GPU mem: Total 4.23 GB, Cache 66.62 MB, DAG 4.16 GB, Miscellaneous 56.00 B 16:28:46 cu-0 Epoch 405 requires 4.23 GB of required memory from total of 3.95 GB available on device. 16:28:46 cu-0 Required GPU mem: Total 4.23 GB, Cache 66.62 MB, DAG 4.16 GB, Miscellaneous 56.00 B 16:28:46 cu-0 Epoch 405 requires 4.23 GB of required memory from total of 3.95 GB available on device. Quote Link to comment
FlamongOle Posted March 31, 2021 Author Share Posted March 31, 2021 (edited) 2 minutes ago, sWampyGround said: Does this mean my 1050ti is useless? 16:28:40 cu-0 Using Pci 0000:05:00.0: GeForce GTX 1050 Ti (Compute 6.1) Memory : 3.95 GB 16:28:40 miner Epoch : 405 Difficulty : 4.00 Gh 16:28:46 cu-0 Required GPU mem: Total 4.23 GB, Cache 66.62 MB, DAG 4.16 GB, Miscellaneous 56.00 B 16:28:46 cu-0 Epoch 405 requires 4.23 GB of required memory from total of 3.95 GB available on device. 16:28:46 cu-0 Required GPU mem: Total 4.23 GB, Cache 66.62 MB, DAG 4.16 GB, Miscellaneous 56.00 B 16:28:46 cu-0 Epoch 405 requires 4.23 GB of required memory from total of 3.95 GB available on device. Sadly yes, the memory requirements has surpassed 4GB memory. I will add that as a note at frontpage Edited March 31, 2021 by olehj Mem req edit Quote Link to comment
sWampyGround Posted March 31, 2021 Share Posted March 31, 2021 Just now, olehj said: Sadly yes, the memory requirements has surpassed 4GB memory. When I saw that I started looking for how to change it to some thing else to mine, then saw no option. ;-( Guess It's back to one of the apps that support ones that don't need 4gb. Quote Link to comment
RazorX Posted March 31, 2021 Share Posted March 31, 2021 does this mean it's now working for me: Quote 00:50:58 miner 0:03 A0 0.00 h - cu0 0.00 43C 30% 00:51:01 miner Job: d7b4504c blk: 12150211 eu1.ethermine.org:5555 00:51:01 miner Job: d7b4504c blk: 12150211 eu1.ethermine.org:5555 00:51:02 miner Job: 4e5086bd blk: 12150211 eu1.ethermine.org:5555 00:51:03 miner Job: a1d74900 blk: 12150212 eu1.ethermine.org:5555 00:51:03 miner Job: 8dca42b6 blk: 12150212 eu1.ethermine.org:5555 00:51:03 miner 0:04 A0 0.00 h - cu0 0.00 42C 30% 00:51:07 miner Job: 5341d3af blk: 12150212 eu1.ethermine.org:5555 00:51:08 miner 0:04 A0 0.00 h - cu0 0.00 42C 30% 00:51:11 miner Job: 385375c6 blk: 12150212 eu1.ethermine.org:5555 Quote Link to comment
FlamongOle Posted March 31, 2021 Author Share Posted March 31, 2021 (edited) 4 minutes ago, RazorX said: does this mean it's now working for me: Yes it works container and application wise. Now you should detect hashrates like the ones in green after the DAG file has been created, it might take some time depending on your GPU: Quote 01:55:15 miner Job: 33f49c5a blk: 12150231 eu1.ethermine.org:5555 01:55:15 miner 0:30 A18 27.27 Mh - cu0 27.27 76C 51% 133.86W Edited March 31, 2021 by olehj Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.