mickeykelley Posted June 22, 2021 Share Posted June 22, 2021 I just had a red dot appear next to one of the drives on the main menu. I have stopped the array and rebooted the server and brough it back on line. I CAN access the files on that drive but the red dot is still there. What should I do next? Quote Link to comment
JorgeB Posted June 23, 2021 Share Posted June 23, 2021 Please post the diagnostics: Tools -> Diagnostics Quote Link to comment
mickeykelley Posted June 23, 2021 Author Share Posted June 23, 2021 (edited) Jun 23 03:12:32 Tower kernel: quiet_error: 9224 callbacks suppressed Jun 23 03:12:32 Tower kernel: Buffer I/O error on device md15, logical block 101335245 Jun 23 03:12:36 Tower last message repeated 9 times Jun 23 03:12:38 Tower kernel: quiet_error: 5 callbacks suppressed Jun 23 03:12:38 Tower kernel: Buffer I/O error on device md15, logical block 101335245 Jun 23 03:12:40 Tower last message repeated 9 times Edited June 23, 2021 by mickeykelley Quote Link to comment
JonathanM Posted June 23, 2021 Share Posted June 23, 2021 You forgot to attach the diagnostics zip file. Quote Link to comment
mickeykelley Posted June 23, 2021 Author Share Posted June 23, 2021 I do not see a Tools menu or option Quote Link to comment
itimpi Posted June 23, 2021 Share Posted June 23, 2021 46 minutes ago, mickeykelley said: I do not see a Tools menu or option It should be the right-most tab in the UnRaid GUI. Quote Link to comment
mickeykelley Posted June 24, 2021 Author Share Posted June 24, 2021 Just realized I posted this in ver 6 and I am still on 5. Planning on upgrading after I get this figure out just to be sure. Although, I guess the update only affects the flash drive and not any of the data drives. Correct? Quote Link to comment
JonathanM Posted June 24, 2021 Share Posted June 24, 2021 Describe your hardware. Motherboard, CPU, RAM, HBA, drives. Quote Link to comment
mickeykelley Posted June 24, 2021 Author Share Posted June 24, 2021 I think what may have happened is one of the drives ( think that one) got popped out. The cabinet is a hot swappable (?) as I recall and maybe there was something in the buffer. Is there a way to CHKDSK type of app to check the drive? Quote Link to comment
itimpi Posted June 24, 2021 Share Posted June 24, 2021 1 minute ago, mickeykelley said: Is there a way to CHKDSK type of app to check the drive? If you are using UnRaid v5 then the file system type must be reiserFs and the tool to use is reiserfsck. On v5 it needs to be run from the command line. Quote Link to comment
trurl Posted June 24, 2021 Share Posted June 24, 2021 5 hours ago, mickeykelley said: posted this in ver 6 and I am still on 5 Moved to correct subforum On 6/22/2021 at 3:56 PM, mickeykelley said: I just had a red dot appear next to one of the drives on the main menu. I have stopped the array and rebooted the server and brough it back on line. I CAN access the files on that drive but the red dot is still there. What should I do next? This indicates a disabled disk and since it is emulated you can still access its data. 5 hours ago, itimpi said: If you are using UnRaid v5 then the file system type must be reiserFs and the tool to use is reiserfsck. On v5 it needs to be run from the command line. Filesystem check isn't the way forward for a mountable disabled disk. Zip your syslog and post it. Also post the SMART report for that disk. Might be useful to know more about your other drives also since their health may affect rebuilding the disabled disk. How many disks do you have? Do you know if they are all in good health? V6 makes it much easier to get us all the necessary information, and makes it very simple to see if Unraid thinks your disks are in good health. Quote Link to comment
mickeykelley Posted June 24, 2021 Author Share Posted June 24, 2021 So I can get on with the version 6 upgrade then figure out this disk? Quote Link to comment
trurl Posted June 24, 2021 Share Posted June 24, 2021 5 minutes ago, mickeykelley said: So I can get on with the version 6 upgrade then figure out this disk? 1 hour ago, jonathanm said: Describe your hardware. Motherboard, CPU, RAM, HBA, drives. Quote Link to comment
mickeykelley Posted June 24, 2021 Author Share Posted June 24, 2021 SysLog UnRaid.txt Quote Link to comment
JonathanM Posted June 24, 2021 Share Posted June 24, 2021 You still didn't answer the question about your hardware, but based on the screenshot you just posted, especially with the read errors next to disk4, I think you are in a precarious state. My gut reaction is to tell you to make sure everything currently on the array that is of value is backed up elsewhere, before you start mucking around and possibly making the situation worse. I see from your browser tabs you are looking at new drives, I think that's for the best. Ideally you should probably build another box and copy the data without disturbing the current server. I'm betting your current setup isn't going to be happy running V6. Quote Link to comment
JonathanM Posted June 24, 2021 Share Posted June 24, 2021 Any data you care about on disk4 and disk15 needs to be copied to another location. Quote Link to comment
JonathanM Posted June 24, 2021 Share Posted June 24, 2021 Your Pro license will easily transfer to a new system, and you can leave the current system intact while you copy data. All you need is a copy of your pro.key file. Quote Link to comment
JorgeB Posted June 24, 2021 Share Posted June 24, 2021 Based on the syslog disk4 appears to be failing, post a SMART report for that disk, or update to v6 and post the diags, you should also change the onboard SATA controller from IDE to AHCI. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.