rbronco21 Posted September 6, 2021 Share Posted September 6, 2021 This picture says it all. I noticed other GUI elements don't work. For example, I tried to mirror my syslog to flash and Apply would be active, but it didn't save the setting. Stopping my array and reboot didn't work either. I'm guessing there are lots of GUI elements that aren't working correctly. Rebooted from command line didn't help. Syslog is from that reboot after I started the array and verified that shares are still sharing. V6.9.2 syslog.txt Quote Link to comment
trurl Posted September 6, 2021 Share Posted September 6, 2021 Go to Tools - Diagnostics and attach the complete Diagnostics ZIP file to your NEXT post in this thread. Quote Link to comment
trurl Posted September 6, 2021 Share Posted September 6, 2021 21 minutes ago, trurl said: Go to Tools - Diagnostics and attach the complete Diagnostics ZIP file to your NEXT post in this thread. If you can't do that What do you get from the command line with this? df Quote Link to comment
rbronco21 Posted September 6, 2021 Author Share Posted September 6, 2021 Does DIagnostics take a long time? I let it run for a few minutes and gave up so I could run df. Filesystem 1K-blocks Used Available Use% Mounted on rootfs 1943920 754408 1189512 39% / devtmpfs 1943928 0 1943928 0% /dev tmpfs 2018624 0 2018624 0% /dev/shm cgroup_root 8192 0 8192 0% /sys/fs/cgroup tmpfs 131072 760 130312 1% /var/log /dev/sda1 7815232 572192 7243040 8% /boot overlay 1943920 754408 1189512 39% /lib/modules overlay 1943920 754408 1189512 39% /lib/firmware tmpfs 1024 0 1024 0% /mnt/disks tmpfs 1024 0 1024 0% /mnt/remotes /dev/mapper/md1 13670472644 7053217548 6617255096 52% /mnt/disk1 /dev/mapper/md2 7811923236 6566030588 1245892648 85% /mnt/disk2 /dev/mapper/md3 7811923236 6343424060 1468499176 82% /mnt/disk3 /dev/mapper/md4 3905094436 1982907988 1922186448 51% /mnt/disk4 /dev/mapper/md5 7811923236 5983880092 1828043144 77% /mnt/disk5 /dev/mapper/sdc1 234300188 18081632 216218556 8% /mnt/cache shfs 41011336788 27929460276 13081876512 69% /mnt/user0 shfs 41011336788 27929460276 13081876512 69% /mnt/user /dev/loop2 5242880 2112988 2724788 44% /var/lib/docker Quote Link to comment
trurl Posted September 6, 2021 Share Posted September 6, 2021 Sorry, easier to understand if you do it like this instead df -h Quote Link to comment
rbronco21 Posted September 6, 2021 Author Share Posted September 6, 2021 Filesystem Size Used Avail Use% Mounted on rootfs 1.9G 737M 1.2G 39% / devtmpfs 1.9G 0 1.9G 0% /dev tmpfs 2.0G 0 2.0G 0% /dev/shm cgroup_root 8.0M 0 8.0M 0% /sys/fs/cgroup tmpfs 128M 784K 128M 1% /var/log /dev/sda1 7.5G 559M 7.0G 8% /boot overlay 1.9G 737M 1.2G 39% /lib/modules overlay 1.9G 737M 1.2G 39% /lib/firmware tmpfs 1.0M 0 1.0M 0% /mnt/disks tmpfs 1.0M 0 1.0M 0% /mnt/remotes /dev/mapper/md1 13T 6.6T 6.2T 52% /mnt/disk1 /dev/mapper/md2 7.3T 6.2T 1.2T 85% /mnt/disk2 /dev/mapper/md3 7.3T 6.0T 1.4T 82% /mnt/disk3 /dev/mapper/md4 3.7T 1.9T 1.8T 51% /mnt/disk4 /dev/mapper/md5 7.3T 5.6T 1.8T 77% /mnt/disk5 /dev/mapper/sdc1 224G 18G 207G 8% /mnt/cache shfs 39T 27T 13T 69% /mnt/user0 shfs 39T 27T 13T 69% /mnt/user /dev/loop2 5.0G 2.1G 2.6G 44% /var/lib/docker Quote Link to comment
trurl Posted September 6, 2021 Share Posted September 6, 2021 How much RAM do you have? Quote Link to comment
rbronco21 Posted September 6, 2021 Author Share Posted September 6, 2021 Maxed the MB at 4GB. Quote Link to comment
Squid Posted September 6, 2021 Share Posted September 6, 2021 Edit the file /config/docker.cfg on the flash drive and change dockerEnabled from yes to be no and reboot and try again. And close all tabs open to the server Quote Link to comment
rbronco21 Posted September 6, 2021 Author Share Posted September 6, 2021 Does reboot from the cmd line stop the array or should I continue to do that manually? Changed docker.cfg and rebooted (after manually stopping the array in the GUI). No change. Could it be as simple as overwriting V6.9.2 with a fresh copy? Quote Link to comment
Squid Posted September 6, 2021 Share Posted September 6, 2021 18 minutes ago, rbronco21 said: Does reboot from the cmd line stop the array yes powerdown -r 19 minutes ago, rbronco21 said: Could it be as simple as overwriting V6.9.2 with a fresh copy Won't hurt Quote Link to comment
rbronco21 Posted September 6, 2021 Author Share Posted September 6, 2021 I replaced bz* files with no change. Are there other files I should replace? Quote Link to comment
trurl Posted September 6, 2021 Share Posted September 6, 2021 Do you still have dockers disabled? If not, disable them, then boot in SAFE mode. Quote Link to comment
rbronco21 Posted September 7, 2021 Author Share Posted September 7, 2021 No change. Quote Link to comment
trurl Posted September 7, 2021 Share Posted September 7, 2021 Do you have any adblockers or anything else that might interfere? Quote Link to comment
rbronco21 Posted September 7, 2021 Author Share Posted September 7, 2021 I do, but they are all disabled in Chrome and they haven't interfered until recently. I also tried Edge and got the same result. I only use Edge when I can't get Chrome to work since it is as virgin as it gets settings- and addons-wise. Is running GUI Safe Mode the same as moving unRAID to a new folder on the USB stick and running a clean version? If that's something to try, can I get a little help so I don't endanger my install? Quote Link to comment
trurl Posted September 7, 2021 Share Posted September 7, 2021 SAFE mode just starts without loading any plugins. Quote Link to comment
rbronco21 Posted September 7, 2021 Author Share Posted September 7, 2021 Well great, I tried IE to check off every PC browser and they all fail. But it works on my iPhone in Chrome. So something on my PC is blocking it... Sorry for the wild goose chase, but any ideas on the PC end? The last thing I updated was Win10 KB5005101. https://support.microsoft.com/en-us/topic/september-1-2021-kb5005101-os-builds-19041-1202-19042-1202-and-19043-1202-preview-82a50f27-a56f-4212-96ce-1554e8058dc1 Quote Link to comment
JonathanM Posted September 7, 2021 Share Posted September 7, 2021 5 minutes ago, rbronco21 said: any ideas on the PC end? Which security suite are you using? Quote Link to comment
rbronco21 Posted September 7, 2021 Author Share Posted September 7, 2021 It's Bitdefender's fault. I am looking for a way to exclude the server's name (or replace it). Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.