February 21, 201214 yr Author I'll checkout the health page today and test the entire setup in Internet Explorer, usually I don't touch it Thanks for reporting bugs etc! And thanks again Boneinl I forgot to rename the packages you made to include boneinl, I'll do that today as well.
February 21, 201214 yr can Notification Settings be sett by different user than root ? can't access tho folder from windows. //Peter When changing the path to my cache drive, it wont let it to spin down, when force it to spin down the drive, it spin up again after some time.
February 21, 201214 yr Yes, I am using Internet Explorer and my Health page looks like the picture in the attachment. This is a problem of Internet Explorer, the same thing happens to me, though it is introduced by one of the microsoft updates. I can tell because I have one machine without all of the patches and Internet Explorer displays all fine, while the other machine which is fully up to date with patches shows this behaviour. Furthermore the header is also screwed up (text at the right is moved all the way to the left next to the picture). Is this also happening to you?
February 21, 201214 yr No, the S3 sleep script he also wrote (I have the independent version, however it is also included with SimpleFeatures in the settings pages) Not really sure what you mean here... In this version 1.0b3 actually both the sleep button and the sleep script issue directly the sleep status without any prior commands to spin up disks.
February 21, 201214 yr Yes, I am using Internet Explorer and my Health page looks like the picture in the attachment. This is a problem of Internet Explorer, the same thing happens to me, though it is introduced by one of the microsoft updates. I can tell because I have one machine without all of the patches and Internet Explorer displays all fine, while the other machine which is fully up to date with patches shows this behaviour. Furthermore the header is also screwed up (text at the right is moved all the way to the left next to the picture). Is this also happening to you? I haven't noticed any header problem. But it is indeed a Interne Explorer problem. Firefox looks good. Way to go microsoft!
February 21, 201214 yr I haven't noticed any header problem. But it is indeed a Interne Explorer problem. Firefox looks good. Way to go microsoft! I have installed the latest version of Chrome and this is working too (I believe there was a problem with an earlier version of Chrome).
February 22, 201214 yr Author Released updates to two packages: Developers: Click link below to see how to add a notification to the webGui! http://code.google.com/p/unraid-simplefeatures/wiki/NotificationsDeveloperInformation Packages: http://unraid-simplefeatures.googlecode.com/files/simpleFeatures-v1.0b4-Base.tgz Improvements: Added scripts to add in notifications. Bug Fixes: CSS Fixes http://unraid-simplefeatures.googlecode.com/files/simpleFeatures-v1.0b4-email-notify-addon.tgz Additions: Modified unraid_notify to push Notifications to webGui. Bug Fixes: Fixed Auth when no user is defined Fixed test email script
February 22, 201214 yr I welcome back the "uncommitted changes" notification, thanks for the quick fix
February 22, 201214 yr Just wondering, would it be possible to show the number of users connected to the unRAID server possibly somewhere in the top right corner? Also, thanks for the menu fix in Chrome.
February 22, 201214 yr I still experience slowdowns/unresponsiveness of the interface, now when i enter the health page. Yesterday, right after installing 1.0b3 and after looking in the health page, the interface "stalled". Short after that I couldn't enter the Unraid main page anymore.
February 22, 201214 yr I still experience slowdowns/unresponsiveness of the interface, now when i enter the health page. Yesterday, right after installing 1.0b3 and after looking in the health page, the interface "stalled". Short after that I couldn't enter the Unraid main page anymore. What version of unRAID are you using?
February 22, 201214 yr I still experience slowdowns/unresponsiveness of the interface, now when i enter the health page. Yesterday, right after installing 1.0b3 and after looking in the health page, the interface "stalled". Short after that I couldn't enter the Unraid main page anymore. What version of unRAID are you using? I use 5.0b14
February 22, 201214 yr Do you get a delay upon initial access of the health page? The script tries to read the SMART parameters of the first selected disk (parity disk) and only checks the active/inactive status of the other disks. If your parity disk (and others) is attached on an IDE interface it might take some time to retrieve the SMART information as the disk will need to spin up first. You can try to spin up first all disks from the main page and then go to the health page. BTW: I will look into moving the "time-consuming" parts into the background and improve the page response times!
February 22, 201214 yr Any plans to integrate smarthistory with your health status page? Sent from my SGH-I727R using Tapatalk
February 22, 201214 yr Do you get a delay upon initial access of the health page? The script tries to read the SMART parameters of the first selected disk (parity disk) and only checks the active/inactive status of the other disks. If your parity disk (and others) is attached on an IDE interface it might take some time to retrieve the SMART information as the disk will need to spin up first. You can try to spin up first all disks from the main page and then go to the health page. If this script not check all disk automatics, I would like to have a function like in unmenu so it check all disk for errors. Would this script check the disk in the background or is it only when you acess the page? //Peter
February 22, 201214 yr If this script not check all disk automatics, I would like to have a function like in unmenu so it check all disk for errors. Would this script check the disk in the background or is it only when you acess the page? All disks are monitored in the background. If the status of a disk changes (e.g. it goes online, offline or fails) it will be displayed within the next 10 seconds. You can keep the health page open and see "real-time" monitoring. Selecting a specific disk will retrieve and display the requested information for that disk instantly.
February 22, 201214 yr Any plans to integrate smarthistory with your health status page? Sent from my SGH-I727R using Tapatalk What kind of history are you referring to? SMART reports by themselves have already some kind of history in them.
February 22, 201214 yr No, the S3 sleep script he also wrote (I have the independent version, however it is also included with SimpleFeatures in the settings pages) Not really sure what you mean here... In this version 1.0b3 actually both the sleep button and the sleep script issue directly the sleep status without any prior commands to spin up disks. Mine spins up, but I don't think it's a Simplefeatures thing. Also, the sleep button didn't work when I installed the add-on, It might need a reinstall so i'll report back.
February 22, 201214 yr Do you get a delay upon initial access of the health page? The script tries to read the SMART parameters of the first selected disk (parity disk) and only checks the active/inactive status of the other disks. If your parity disk (and others) is attached on an IDE interface it might take some time to retrieve the SMART information as the disk will need to spin up first. You can try to spin up first all disks from the main page and then go to the health page. BTW: I will look into moving the "time-consuming" parts into the background and improve the page response times! No, it isn't on initial access. When I was on the health page and then tried to access one of the other pages the entire interface became unresponsive. Later I couldn't acces the main page anymore or the server by typing Tower.
February 22, 201214 yr No, it isn't on initial access. When I was on the health page and then tried to access one of the other pages the entire interface became unresponsive. Later I couldn't acces the main page anymore or the server by typing Tower. The script uses in the background the commands "hdparm" and "smartctl", by your description it sounds that something gets locked up when issuing these commands. Are you able to retrieve the different informations from the choices (disk identification, disk capabilities, etc) on the health page itself?
February 22, 201214 yr This looks so great! Can we also have a page for Sensor? info (from /usr/bin/sensors) //Peter
February 22, 201214 yr I still experience slowdowns/unresponsiveness of the interface, now when i enter the health page. Yesterday, right after installing 1.0b3 and after looking in the health page, the interface "stalled". Short after that I couldn't enter the Unraid main page anymore. Another question: do you have a large number of disks? The script starts background monitoring for each individual disk, I am wondering if a high number (say >10) of disks have negative impact on system performance. Perhaps somebody with a large amount of disks can make a comment?
February 22, 201214 yr This looks so great! Can we also have a page for Sensor? info (from /usr/bin/sensors) //Peter If possible, it would be nice to have a short one line of stats at the top right with the Server/Description etc.
Archived
This topic is now archived and is closed to further replies.