"SimpleFeatures" Plugin - Version 1.0.11



2848 posts in this topic Last Reply

Recommended Posts

  • Replies 2.8k
  • Created
  • Last Reply

Top Posters In This Topic

upgraded from 5.0rc8a to rc11 went fine

upgraded from SF1.05 to 1.0.11 went fine

installed PlexMediaServer-0.9.7.7 went fine

 

after starting plex the main SF gui is no longer responding

 

samba/nfs/alternate web server/plex all working fine

 

checking:

root@Tower:/boot# ps aux | grep emhttp | grep -v grep

root    24511  0.2  0.0  12016  1504 ?        Sl  12:33  0:17 /usr/local/sbin/emhttp

 

so emhttp is running

 

free -m says total 8105  used  2932 free 5172 - free should be much lower, no?

 

just got an email saying unraid is fine, so that's working, too

 

where to go from here, please?

Link to post

Hi

Stupid question time, how do i manually spin up / down individual disks in the new version, sure I'm going blind?

 

Check in "Display Settings" in the settings page.

 

Its official shit in the eyes thought I looked in there many thanks for answering an obvious question.

Link to post

For those who want more colored icons (these are not part of simpleFeatures)

 

simpleFeatures.active.streams.png

Active Streams

simpleFeatures.activity.monitor.png

Activity Monitoring

simpleFeatures.log.viewer.png

Logs

simpleFeatures.system.info.png

System Info

simpleFeatures.disk.preclear.png

Disk Preclear

simpleFeatures.email.notify.png

Email Notifications

simpleFeatures.cache.dirs.png

Folder Caching

simpleFeatures.s3.sleep.png

S3 Sleep

simpleFeatures.system.stats.png

System Stats

 

 

Right-click an image and store it in the /boot/plugins/simpleFeatures folder.

You need to reboot to make the change effective.

 

I copied these icons over and rebooted, but still have the default icons.  I tried clearing the browser cache and tried with both IE and then Chrome.

 

Any idea?

 

Has anyone got these icons to show up?

Link to post

For those who want more colored icons (these are not part of simpleFeatures)

 

simpleFeatures.active.streams.png

Active Streams

simpleFeatures.activity.monitor.png

Activity Monitoring

simpleFeatures.log.viewer.png

Logs

simpleFeatures.system.info.png

System Info

simpleFeatures.disk.preclear.png

Disk Preclear

simpleFeatures.email.notify.png

Email Notifications

simpleFeatures.cache.dirs.png

Folder Caching

simpleFeatures.s3.sleep.png

S3 Sleep

simpleFeatures.system.stats.png

System Stats

 

 

Right-click an image and store it in the /boot/plugins/simpleFeatures folder.

You need to reboot to make the change effective.

 

I copied these icons over and rebooted, but still have the default icons.  I tried clearing the browser cache and tried with both IE and then Chrome.

 

Any idea?

 

Has anyone got these icons to show up?

 

Yes, I have.  I used Firefox but believe that the process should be the same with any browser.  I right-clicked on the each icon and selected "Save Image as...".  I then navigated to the  /boot/plugins/simpleFeatures folder and saved the file there.  Repeat eight more times.  Of course you do have to reboot the server and perhaps clear your Windows browser cache.

 

If you are still having an issue, double click on the .png files and see what you see.  You should see the new icons. 

 

PS:  You can do it right from the icons in the quote box above...

 

Edit:  I should make clear that '/boot/plugins/simpleFeatures' folder is where you go if the flash drive is still plugged into your server.  If you have shut the server down, removed the flash drive and plugged it into your PC, you should copy the files to 'plugins\simpleFeatures' folder.  If this is your initial install of 1.0.11 version of simple features, you might have to create the 'simpleFeatures' directory if it doesn't exist inside the 'plugins' folder. 

Link to post

For those who want more colored icons (these are not part of simpleFeatures)

 

simpleFeatures.active.streams.png

Active Streams

simpleFeatures.activity.monitor.png

Activity Monitoring

simpleFeatures.log.viewer.png

Logs

simpleFeatures.system.info.png

System Info

simpleFeatures.disk.preclear.png

Disk Preclear

simpleFeatures.email.notify.png

Email Notifications

simpleFeatures.cache.dirs.png

Folder Caching

simpleFeatures.s3.sleep.png

S3 Sleep

simpleFeatures.system.stats.png

System Stats

 

 

Right-click an image and store it in the /boot/plugins/simpleFeatures folder.

You need to reboot to make the change effective.

 

I copied these icons over and rebooted, but still have the default icons.  I tried clearing the browser cache and tried with both IE and then Chrome.

 

Any idea?

 

Has anyone got these icons to show up?

 

Yes, I have.  I used Firefox but believe that the process should be the same with any browser.  I right-clicked on the each icon and selected "Save Image as...".  I then navigated to the  /boot/plugins/simpleFeatures folder and saved the file there.  Repeat eight more times.  Of course you do have to reboot the server and perhaps clear your Windows browser cache.

 

If you are still having an issue, double click on the .png files and see what you see.  You should see the new icons. 

 

PS:  You can do it right from the icons in the quote box above...

Just finished doing this and it worked for me too.

 

Link to post

No CPU temps are reported here either.  I'm running an ATI chipset with an Intel e2180 CPU.

 

coretemp-isa-0000

Adapter: ISA adapter

Core 0:

  temp2_input: 58.000

  temp2_max: 86.000

  temp2_crit: 100.000

  temp2_crit_alarm: 0.000

Core 1:

  temp3_input: 58.000

  temp3_max: 86.000

  temp3_crit: 100.000

  temp3_crit_alarm: 0.000

Link to post

For those who want more colored icons (these are not part of simpleFeatures)

 

simpleFeatures.active.streams.png

Active Streams

simpleFeatures.activity.monitor.png

Activity Monitoring

simpleFeatures.log.viewer.png

Logs

simpleFeatures.system.info.png

System Info

simpleFeatures.disk.preclear.png

Disk Preclear

simpleFeatures.email.notify.png

Email Notifications

simpleFeatures.cache.dirs.png

Folder Caching

simpleFeatures.s3.sleep.png

S3 Sleep

simpleFeatures.system.stats.png

System Stats

 

 

Right-click an image and store it in the /boot/plugins/simpleFeatures folder.

You need to reboot to make the change effective.

 

I copied these icons over and rebooted, but still have the default icons.  I tried clearing the browser cache and tried with both IE and then Chrome.

 

Any idea?

 

Has anyone got these icons to show up?

 

Ok, figured it out.  When I selected each icon and did a Save Picture As... it saved the files with underscores instead of periods.  With IE9, it saved them as "simpleFeatures_activity_monitor.png"  instead of simpleFeatures.activity.monitor.png.  I renamed and copied them again.  I didn't reboot yet cuz we are watching a movie, but I'm sure it will work now.

 

Update: icons all good after the reboot - very nice!

Link to post

Well the upgrade hasn't gone smoothly for me so far (coming from 1.05 fresh install). Dumped most of the plugins into the plugins folder and I couldn't get unraid to respond on //tower, I could get it on putty though. Rebooted and didn't respond over the network at all. Moved the plugins out of the plugins folder and booted and accessed //tower without any problems. Sorry didn't get any logs, though there might be one.... Anyhow, started to install the plugins manually and ran into this.

root@Tower:~# installplg /boot/config/plugins/simpleFeatures.system.info-1.0.10-noarch-1.plg
installing plugin: simpleFeatures.system.info-1.0.10-noarch-1
file /tmp/plugin-prepare: successfully wrote INLINE file contents
  /bin/bash /tmp/plugin-prepare ... success
file /boot/plugins/simpleFeatures/simpleFeatures.system.info-1.0.10-i486-1.txz: downloading from http://unraid-simplefeatures.googlecode.com/files/simpleFeatures.system.info-1.0.10-i486-1.txz ... wget: error while loading shared libraries: libssl.so.0: cannot open shared object file: No such file or directory
bad download, deleting

Warning: unlink(/boot/plugins/simpleFeatures/simpleFeatures.system.info-1.0.10-i486-1.txz): No such file or directory in /usr/local/sbin/installplg on line 70

 

I got that for stats and temp also. Active streams, activity monitor, cache dirs, core, disk health, email and log all installed fine.

Link to post

Did you try the latest plugin package download or the initial release?

 

Version 1.0.11 downloaded a few hours ago

are you sure you waited long enough? It takes quite a while to start the first time.

 

Sent from my SGH-T889 using Tapatalk 2

 

 

Link to post

wait for what? For unraid to boot? If so then yes I did, I had to hook up a monitor to my unraid server to reboot it because I couldn't access it over the lan. Just rebooted again after having manually installed the packages I listed above and I can't access unraid via the web browser. And my user shares disappeared, only the disk shares are visible. I can telnet into nope problem, which is good so I can remove the plugin and reboot. I'm going to revert back to 1.0.5 or live without simplefeature for now. This is a bit more then a mirror glitch. (Went back to stock, i.e. no simple features, and everything is back to normal)

 

Got a log this time but its late and its too big to attach so I'll have to host it somewhere tomorrow. (I know about pastebin but don't have an account to delete my log after) It's crazy the file limit is 192kb! Can't even attach a txt file....  ???

 

syslog: http://pastebin.com/vqCTb2uj

Link to post

Not sure if this is an issue with this plugin. I am unable to manually start the mover script to transfer everything off my cache drive. Also, my cache drive completely filled up despite having a min free space of 5gigs set. Ill have to investigate that issue.

 

Can anyone else confirm this issue?

Link to post

CPU and MB temps are not beiing reported (just green blocks), sensors -u output included:

 

root@Tower:~# sensors -u

coretemp-isa-0000

Adapter: ISA adapter

Physical id 0:

  temp1_input: 39.000

  temp1_max: 80.000

  temp1_crit: 85.000

  temp1_crit_alarm: 0.000

Core 0:

  temp2_input: 39.000

  temp2_max: 80.000

  temp2_crit: 85.000

  temp2_crit_alarm: 0.000

 

Preclearing my new 4TB right now and loving the fact that the main screen now shows the status of it ! I could not find how to start it off so I did that from screen manually.

 

Got a small heartattach looking at the speed the gui reboots for the preclear, it is steadily at 15MB/s, when look in screen however it is at 50 to 80 MB/s which is what I would expect with what I am doing with the system at the moment, but that looks like a small error. The reported percentage is correct. It would also be nice if the temperature of the disk would be shown, since the disk is stressed during preclear and quite possibly is also in a location a disk has never been in it would be sensible to keep an eye on temperature.

 

Something else I notice: I don't know what happened but as far as the gui was concerned my disks would allmost never spin down, and after a (manual) spin down they would spin ip within the minute.. Since the new version allmost all my disks show spun down... I am wondering if this was a gui glitch in the previous version where disks were actually spun down but did not show it or something else.. But it makes me happy.. !

Link to post

No Temperature reporting on either of my AMD systems.  Output for sensors -u below:

 

System referred to as "Media Server":

 

root@Elsie1:~# sensors -u
k10temp-pci-00c3
Adapter: PCI adapter
temp1:
  temp1_input: 26.375
  temp1_max: 70.000

 

System referred to as "Test Bed:

 

root@Tower:~# sensors -u
No sensors found!
Make sure you loaded all the kernel drivers you need.
Try sensors-detect to find out which these are.
root@Tower:~# sensors-detect
-bash: /usr/sbin/sensors-detect: /usr/bin/perl: bad interpreter: No such file or directory
root@Tower:~#

 

This 'Test Bed' system is built on very old hardware and  that hardware may not even support the reporting (or even the measurement) of temperature.  I thought I would report as it might be useful to implement code to prevent the continuous probing of the system as it does result on-screen error messages on a connected monitor. 

 

 

 

Link to post

manual Mover script worked for me too, although it sseems a little slow but that could be due to lots of small music files.

 

thanks for the responses. I just noticed that the /mnt/user0 directory is missing. My shares are set to use the cache drive so I am totally confused on why this is the case.

Link to post

I checked what more sensors I have, now it looks like this ,can this info be viewed in SF in the future ?

 

 

# Chip drivers
modprobe coretemp
modprobe w83627ehf
modprobe i2c-dev

 

Sensor info (from /usr/bin/sensors)
coretemp-isa-0000
Adapter: ISA adapter
Physical id 0:  +40.0 C  (high = +85.0 C, crit = +105.0 C)
Core 0:         +29.0 C  (high = +85.0 C, crit = +105.0 C)
Core 1:         +38.0 C  (high = +85.0 C, crit = +105.0 C)
Core 2:         +36.0 C  (high = +85.0 C, crit = +105.0 C)
Core 3:         +40.0 C  (high = +85.0 C, crit = +105.0 C)

nct6776-isa-0290
Adapter: ISA adapter
Vcore:         +1.14 V  (min =  +0.00 V, max =  +1.74 V)
in1:           +1.85 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
AVCC:          +3.34 V  (min =  +2.98 V, max =  +3.63 V)
+3.3V:         +3.34 V  (min =  +2.98 V, max =  +3.63 V)
in4:           +0.12 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in5:           +1.69 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
3VSB:          +3.44 V  (min =  +2.98 V, max =  +3.63 V)
Vbat:          +3.25 V  (min =  +2.70 V, max =  +3.63 V)
fan1:         1807 RPM  (min =    0 RPM)  ALARM
fan2:         2089 RPM  (min =    0 RPM)  ALARM
fan3:            0 RPM  (min =    0 RPM)  ALARM
fan4:            0 RPM  (min =    0 RPM)  ALARM
fan5:            0 RPM  (min =    0 RPM)  ALARM
SYSTIN:        +21.0 C  (high =  +0.0 C, hyst =  +0.0 C)  ALARM  sensor = thermistor
CPUTIN:        +26.0 C  (high = +80.0 C, hyst = +75.0 C)  sensor = thermistor
AUXTIN:        +50.0 C  (high = +80.0 C, hyst = +75.0 C)  sensor = thermistor
PECI Agent 0:  +35.5 C  
cpu0_vid:     +0.000 V
intrusion0:   ALARM
intrusion1:   ALARM

 

And sensors -u

 

root@tower:~# sensors -u
coretemp-isa-0000
Adapter: ISA adapter
Physical id 0:
  temp1_input: 44.000
  temp1_max: 85.000
  temp1_crit: 105.000
  temp1_crit_alarm: 0.000
Core 0:
  temp2_input: 33.000
  temp2_max: 85.000
  temp2_crit: 105.000
  temp2_crit_alarm: 0.000
Core 1:
  temp3_input: 44.000
  temp3_max: 85.000
  temp3_crit: 105.000
  temp3_crit_alarm: 0.000
Core 2:
  temp4_input: 27.000
  temp4_max: 85.000
  temp4_crit: 105.000
  temp4_crit_alarm: 0.000
Core 3:
  temp5_input: 33.000
  temp5_max: 85.000
  temp5_crit: 105.000
  temp5_crit_alarm: 0.000

nct6776-isa-0290
Adapter: ISA adapter
Vcore:
  in0_input: 1.144
  in0_min: 0.000
  in0_max: 1.744
  in0_alarm: 0.000
in1:
  in1_input: 1.848
  in1_min: 0.000
  in1_max: 0.000
  in1_alarm: 1.000
AVCC:
  in2_input: 3.344
  in2_min: 2.976
  in2_max: 3.632
  in2_alarm: 0.000
+3.3V:
  in3_input: 3.344
  in3_min: 2.976
  in3_max: 3.632
  in3_alarm: 0.000
in4:
  in4_input: 0.120
  in4_min: 0.000
  in4_max: 0.000
  in4_alarm: 1.000
in5:
  in5_input: 1.688
  in5_min: 0.000
  in5_max: 0.000
  in5_alarm: 1.000
3VSB:
  in7_input: 3.440
  in7_min: 2.976
  in7_max: 3.632
  in7_alarm: 0.000
Vbat:
  in8_input: 3.248
  in8_min: 2.704
  in8_max: 3.632
  in8_alarm: 0.000
fan1:
  fan1_input: 1807.000
  fan1_min: 0.000
  fan1_alarm: 1.000
fan2:
  fan2_input: 2083.000
  fan2_min: 0.000
  fan2_alarm: 1.000
fan3:
  fan3_input: 0.000
  fan3_min: 0.000
  fan3_alarm: 1.000
fan4:
  fan4_input: 0.000
  fan4_min: 0.000
  fan4_alarm: 1.000
fan5:
  fan5_input: 0.000
  fan5_min: 0.000
  fan5_alarm: 1.000
SYSTIN:
  temp1_input: 21.000
  temp1_max: 0.000
  temp1_max_hyst: 0.000
  temp1_alarm: 1.000
  temp1_type: 4.000
  temp1_offset: 0.000
CPUTIN:
  temp2_input: 26.000
  temp2_max: 80.000
  temp2_max_hyst: 75.000
  temp2_alarm: 0.000
  temp2_type: 4.000
  temp2_offset: 0.000
AUXTIN:
  temp3_input: 50.000
  temp3_max: 80.000
  temp3_max_hyst: 75.000
  temp3_alarm: 0.000
  temp3_type: 4.000
  temp3_offset: 0.000
PECI Agent 0:
  temp5_input: 44.000
cpu0_vid:
  cpu0_vid: 0.000
intrusion0:
  intrusion0_alarm: 1.000
intrusion1:
  intrusion1_alarm: 1.000

 

Link to post

Here is my sensors -u in case this helps. My temp display is NOT working either:

k10temp-pci-00c3
Adapter: PCI adapter
temp1:
  temp1_input: 61.500
  temp1_max: 70.000
  temp1_crit: 100.000
  temp1_crit_hyst: 97.000

it8721-isa-0290
Adapter: ISA adapter
in0:
  in0_input: 1.068
  in0_min: 2.028
  in0_max: 1.896
  in0_alarm: 1.000
in1:
  in1_input: 2.220
  in1_min: 1.824
  in1_max: 0.660
  in1_alarm: 1.000
in2:
  in2_input: 2.880
  in2_min: 0.756
  in2_max: 0.492
  in2_alarm: 1.000
+3.3V:
  in3_input: 3.336
  in3_min: 5.760
  in3_max: 4.560
  in3_alarm: 1.000
in4:
  in4_input: 2.220
  in4_min: 1.956
  in4_max: 3.024
  in4_alarm: 0.000
in5:
  in5_input: 2.988
  in5_min: 2.292
  in5_max: 1.368
  in5_alarm: 1.000
in6:
  in6_input: 2.220
  in6_min: 3.012
  in6_max: 3.036
  in6_alarm: 1.000
3VSB:
  in7_input: 3.360
  in7_min: 5.952
  in7_max: 2.856
  in7_alarm: 1.000
Vbat:
  in8_input: 3.312
fan1:
  fan1_input: 0.000
  fan1_min: 105.000
  fan1_alarm: 1.000
fan2:
  fan2_input: 3835.000
  fan2_min: 15.000
  fan2_alarm: 0.000
temp1:
  temp1_input: 49.000
  temp1_max: -47.000
  temp1_min: -90.000
  temp1_alarm: 1.000
  temp1_type: 4.000
temp2:
  temp2_input: 40.000
  temp2_max: -113.000
  temp2_min: -42.000
  temp2_alarm: 1.000
  temp2_type: 4.000
temp3:
  temp3_input: -8.000
  temp3_max: -74.000
  temp3_min: 12.000
  temp3_alarm: 1.000
  temp3_type: 4.000
intrusion0:
  intrusion0_alarm: 1.000

Link to post
  • Squid locked this topic
Guest
This topic is now closed to further replies.