maxkoehler Posted May 2, 2022 Share Posted May 2, 2022 Hi there, my question relates to power readings from nvidia-smi. Currently, I'm running a Nvidia Quadro P620 with the newest driver from the nvidia driver plugin (great work btw). In general, it all works fine! Transcoding for Jellyfin and tdarr works and the card also enters persistence mode when idle. No complaints so far. What bothers me a bit, is that my graphics card won't output power reading informations through nvidia-smi. I'm currently not aware if the Nvidia Quadro P620 is just not capabale of doing so, or if there's some issue going on. To give you a better overview, I attached the NVSMI Log. Thank you and best Regard ==============NVSMI LOG============== Timestamp : Mon May 2 02:51:24 2022 Driver Version : 510.68.02 CUDA Version : 11.6 Attached GPUs : 1 GPU 00000000:01:00.0 Product Name : Quadro P620 Product Brand : Quadro Product Architecture : Pascal Display Mode : Disabled Display Active : Disabled Persistence Mode : Enabled MIG Mode Current : N/A Pending : N/A Accounting Mode : Disabled Accounting Mode Buffer Size : 4000 Driver Model Current : N/A Pending : N/A Serial Number : 1421020068036 GPU UUID : GPU-1bb3e78e-770d-f7a6-affe-5dcd4be0292d Minor Number : 0 VBIOS Version : 86.07.90.00.A7 MultiGPU Board : No Board ID : 0x100 GPU Part Number : 900-5G178-2741-000 Module ID : 0 Inforom Version Image Version : G178.0505.00.02 OEM Object : 1.1 ECC Object : N/A Power Management Object : N/A GPU Operation Mode Current : N/A Pending : N/A GSP Firmware Version : N/A GPU Virtualization Mode Virtualization Mode : None Host VGPU Mode : N/A IBMNPU Relaxed Ordering Mode : N/A PCI Bus : 0x01 Device : 0x00 Domain : 0x0000 Device Id : 0x1CB610DE Bus Id : 00000000:01:00.0 Sub System Id : 0x126410DE GPU Link Info PCIe Generation Max : 2 Current : 1 Link Width Max : 16x Current : 16x Bridge Chip Type : N/A Firmware : N/A Replays Since Reset : 0 Replay Number Rollovers : 0 Tx Throughput : 0 KB/s Rx Throughput : 0 KB/s Fan Speed : 34 % Performance State : P8 Clocks Throttle Reasons Idle : Active Applications Clocks Setting : Not Active SW Power Cap : Not Active HW Slowdown : Not Active HW Thermal Slowdown : Not Active HW Power Brake Slowdown : Not Active Sync Boost : Not Active SW Thermal Slowdown : Not Active Display Clock Setting : Not Active FB Memory Usage Total : 2048 MiB Reserved : 48 MiB Used : 1 MiB Free : 1998 MiB BAR1 Memory Usage Total : 256 MiB Used : 4 MiB Free : 252 MiB Compute Mode : Default Utilization Gpu : 0 % Memory : 0 % Encoder : 0 % Decoder : 0 % Encoder Stats Active Sessions : 0 Average FPS : 0 Average Latency : 0 FBC Stats Active Sessions : 0 Average FPS : 0 Average Latency : 0 Ecc Mode Current : N/A Pending : N/A ECC Errors Volatile Single Bit Device Memory : N/A Register File : N/A L1 Cache : N/A L2 Cache : N/A Texture Memory : N/A Texture Shared : N/A CBU : N/A Total : N/A Double Bit Device Memory : N/A Register File : N/A L1 Cache : N/A L2 Cache : N/A Texture Memory : N/A Texture Shared : N/A CBU : N/A Total : N/A Aggregate Single Bit Device Memory : N/A Register File : N/A L1 Cache : N/A L2 Cache : N/A Texture Memory : N/A Texture Shared : N/A CBU : N/A Total : N/A Double Bit Device Memory : N/A Register File : N/A L1 Cache : N/A L2 Cache : N/A Texture Memory : N/A Texture Shared : N/A CBU : N/A Total : N/A Retired Pages Single Bit ECC : N/A Double Bit ECC : N/A Pending Page Blacklist : N/A Remapped Rows : N/A Temperature GPU Current Temp : 40 C GPU Shutdown Temp : 103 C GPU Slowdown Temp : 100 C GPU Max Operating Temp : N/A GPU Target Temperature : 83 C Memory Current Temp : N/A Memory Max Operating Temp : N/A Power Readings Power Management : N/A Power Draw : N/A Power Limit : N/A Default Power Limit : N/A Enforced Power Limit : N/A Min Power Limit : N/A Max Power Limit : N/A Clocks Graphics : 139 MHz SM : 139 MHz Memory : 405 MHz Video : 544 MHz Applications Clocks Graphics : 1265 MHz Memory : 2505 MHz Default Applications Clocks Graphics : 1265 MHz Memory : 2505 MHz Max Clocks Graphics : 1354 MHz SM : 1354 MHz Memory : 2505 MHz Video : 1341 MHz Max Customer Boost Clocks Graphics : 1354 MHz Clock Policy Auto Boost : N/A Auto Boost Default : N/A Voltage Graphics : N/A Processes : None Quote Link to comment
trurl Posted May 2, 2022 Share Posted May 2, 2022 You can go directly to the correct support thread for any of your plugins by clicking its Support link on the Plugins page 1 Quote Link to comment
ich777 Posted May 2, 2022 Share Posted May 2, 2022 18 hours ago, maxkoehler said: What bothers me a bit, is that my graphics card won't output power reading informations through nvidia-smi. I'm currently not aware if the Nvidia Quadro P620 is just not capabale of doing so, or if there's some issue going on. This is a known issue but nothing you or I can do about that because basically Nvidia breaks some readings for cards in each new version from the driver and so to speak nvidia-smi. Even if the card can report it it won't show up because it is broken in nvidia-smi and it will get worse over time with each new driver revision released because if they fix it for one card it breaks for another one. My Nvidia T400 also doesn't report the currently drawn power and this is a "new" card. As @trurl pointed out this is the correct thread for this question: Quote Link to comment
maxkoehler Posted May 2, 2022 Author Share Posted May 2, 2022 Thanks for you replies! Sorry for starting a new topic instead of asking in the support thread, I'm new to posting in forums but I'll adhere to it in the future 👍. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.