kizer Posted June 7, 2011 Share Posted June 7, 2011 I built this not to long ago out of birch Plywood. I wanted a place to put my machine and use my closet opposed to just throwing it on the floor. Parts bins on the left, printer in the middle and I plan on eventually building some adjustable shelves about the server for my wifes papers. The supports that run from the front to the back wall are cut short to allow air to be blown to the back and escape opposed to being boxed in. I had fun with it and I plan on rebuilding the hanging shelves up above so they match material wise. Eventually I'll build a large desk outside of the closet. Link to comment
opentoe Posted June 9, 2011 Share Posted June 9, 2011 I'm lucky enough to have a pretty good size closet in my office. Put some shevles in for cable modem/router and then the servers just sit on hard pieces of wood below the shelf. Out of site, out of the way. I don't care how loud my fans are, since I close the closet door and I don't hear anything. Link to comment
ricsouthcott Posted June 12, 2011 Author Share Posted June 12, 2011 would like to mount the way vexhold has in this picture from his thread http://lime-technology.com/forum/index.php?topic=10957.0 any ideas what racking that is? Link to comment
StevenD Posted June 12, 2011 Share Posted June 12, 2011 would like to mount the way vexhold has in this picture from his thread http://lime-technology.com/forum/index.php?topic=10957.0 any ideas what racking that is? Looks like an old Compaq rack. Link to comment
kizer Posted June 13, 2011 Share Posted June 13, 2011 I had a full size rack in my office and honestly it just was to hot. Of course if had of kept it in the garage it would of been different, but none the less it sits in the garage until I throw it up on Craigslist Link to comment
rfksolutions Posted June 19, 2011 Share Posted June 19, 2011 looking for ideas I have mount my server rack (DIY using ikea Rast). see sample images Look full album at http://bit.ly/lvrvu5. I'm waiting for put my new server 19" 2u case with unraid in my DIY rack. Link to comment
cyrnel Posted June 19, 2011 Share Posted June 19, 2011 @rfksolutions, nice job! (on rack and pictures) Link to comment
Johnm Posted June 19, 2011 Share Posted June 19, 2011 the problem with the Ikea rack is that it is about 12.5" deep and most rackmount servers are 20" to 28" deep. I believe the Norco 4224 is about 26". You might be able to attach 2 together to make it 25" deep. Some wood glue, clamps and sanding. possibly a deck plate on the inside? the price is right. Link to comment
Rajahal Posted June 24, 2011 Share Posted June 24, 2011 Here's another DIY Ikea project: LackRack I don't use one myself, but I've always wanted to build one. Pretty unnecessary, though, since my server is a tower Link to comment
HatchetMan Posted June 25, 2011 Share Posted June 25, 2011 Here's another DIY Ikea project: LackRack I don't use one myself, but I've always wanted to build one. Pretty unnecessary, though, since my server is a tower Very interesting. Any idea what this link was pointing to? Current LACK tables have hollow legs; only the top 5 cm (2") is solid. Fitting equipment below the solid section may require the use of cavity plugs, such as these Sorry, page not found! Edit: Link seems to be working now... Link to comment
StevenD Posted July 25, 2011 Share Posted July 25, 2011 I picked up an APC NetShelter 22U rack off of craigslist a few weeks ago. Finally got my unRAID racked. I sure wish I had two more of the SC933s. I kick myself all the time for not buying more when they were on eBay for $199. I also picked up that Apen MasterView KVM for $35 with all the cables! Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.