aronmal Posted October 15, 2022 Share Posted October 15, 2022 Hallo, ich hatte soeben mal wieder einen Crash. Das passiert irgendwie hin und wieder mal, so alle 1-2 Monate. Mein Supermirco Mainboard zeigt im IPMI Health Event Log folgendes (UTC Zeit): 2022/10/15 20:58:04 - OS Stop/Shutdown(FANA) - runtime critical stop (a.k.a. core dump, blue screen) - Assertion Ich hatte auch schonmal in den Unraid Diagnostics gesucht und nichts gefunden. Hat jemand von euch vielleicht eine Idee? System: Intel Xeon Gold 6130 128 GB DDR4 ECC Supermicro X11SPL-F 6x HDD 2x SSD 2x SAT Twin Tuner Intel NIC 4-Port 1Gbit Danke für eure Hilfe! tower-diagnostics-20221015-2328.zip Quote Link to comment
mgutt Posted October 15, 2022 Share Posted October 15, 2022 Syslog mirror aktiv? Nach einem Crash sind sonst alle Logs weg. Quote Link to comment
ich777 Posted October 18, 2022 Share Posted October 18, 2022 On 10/15/2022 at 11:31 PM, aronmal said: Das passiert irgendwie hin und wieder mal, so alle 1-2 Monate. Bitte poste einen Screenshot deiner Docker Einstellungen mit der Advanced View an geschaltet. Quote Link to comment
aronmal Posted October 30, 2022 Author Share Posted October 30, 2022 Hallo, ich bin endlich wieder im Lande. On 10/15/2022 at 11:52 PM, mgutt said: Syslog mirror aktiv? Nach einem Crash sind sonst alle Logs weg. Hatte ich für eine lange Zeit, war dann länger nicht gecrasht und hatte es deshalb Anfang diesen Monats deaktiviert. Aber ich habe noch den syslog als ich am 02.09. um 00:15 Uhr einen Crash hatte: Und hier der gekürzte Syslog vom 01.09. - 02.09. : extracted-syslog.txt On 10/18/2022 at 7:00 AM, ich777 said: Bitte poste einen Screenshot deiner Docker Einstellungen mit der Advanced View an geschaltet. Danke für eure Beteiligung! Quote Link to comment
ich777 Posted October 30, 2022 Share Posted October 30, 2022 35 minutes ago, aronmal said: Danke für eure Beteiligung! Bitte stell auf IPVLAN um in den Docker Einstellungen. Quote Link to comment
aronmal Posted November 9, 2022 Author Share Posted November 9, 2022 Habe ich gerade getan, aber ich habe jetzt Probleme mit meinem mailcow stack (docker compose). Quote Link to comment
aronmal Posted November 9, 2022 Author Share Posted November 9, 2022 Teil des Watchdog Container Logs: Domain stackoverflow.com was not found by the server DNSSEC failure Domain stackoverflow.com was not found by the server DNSSEC failure Domain stackoverflow.com was not found by the server DNSSEC failure Domain stackoverflow.com was not found by the server DNSSEC failure Domain stackoverflow.com was not found by the server DNSSEC failure Wed Nov 9 19:25:27 CET 2022 Container is running for less than 360 seconds, skipping action... Wed Nov 9 19:25:27 CET 2022 Dovecot health level: 0% (0/12), health trend: -10 Wed Nov 9 19:25:27 CET 2022 Unbound health level: 40% (2/5), health trend: -3 Wed Nov 9 19:25:27 CET 2022 PHP-FPM health level: 100% (5/5), health trend: 0 Wed Nov 9 19:25:28 CET 2022 Dovecot hit error limit connect to address 172.22.1.250 and port 10001: Connection refused connect to address 172.22.1.250 and port 4190: Connection refused connect to address 172.22.1.250 and port 24: Connection refused SMTP CRITICAL - 0.000 sec. response time|time=0.000114s;;;0.000000 connect to address 172.22.1.250 and port 993: Connection refused connect to address 172.22.1.250 and port 143: Connection refused connect to address 172.22.1.250 and port 10001: Connection refused connect to address 172.22.1.250 and port 4190: Connection refused connect to address 172.22.1.250 and port 24: Connection refused Teil des Unbound container logs: [1668018451] libunbound[9:0] error: udp connect failed: Address not available for 2001:500:9f::42 port 53 [1668018451] libunbound[9:0] error: udp connect failed: Address not available for 2001:500:2f::f port 53 [1668018451] libunbound[9:0] error: udp connect failed: Address not available for 2001:dc3::35 port 53 [1668018451] libunbound[9:0] error: udp connect failed: Address not available for 2001:500:12::d0d port 53 [1668018452] libunbound[9:0] error: udp connect failed: Address not available for 2001:7fe::53 port 53 [1668018455] libunbound[9:0] error: udp connect failed: Address not available for 2001:500:9f::42 port 53 [1668018455] libunbound[9:0] error: udp connect failed: Address not available for 2001:dc3::35 port 53 [1668018455] libunbound[9:0] error: udp connect failed: Address not available for 2001:503:c27::2:30 port 53 [1668018457] libunbound[9:0] error: udp connect failed: Address not available for 2001:500:200::b port 53 [1668018457] libunbound[9:0] error: udp connect failed: Address not available for 2001:500:1::53 port 53 [1668018457] libunbound[9:0] error: udp connect failed: Address not available for 2001:500:12::d0d port 53 [1668018461] libunbound[9:0] error: udp connect failed: Address not available for 2001:500:2::c port 53 [1668018462] libunbound[9:0] error: udp connect failed: Address not available for 2001:500:1::53 port 53 [1668018462] libunbound[9:0] error: udp connect failed: Address not available for 2001:500:2d::d port 53 Receiving root hints... curl: (7) Failed to connect to www.internic.net port 443 after 2674 ms: Host is unreachable setup in directory /etc/unbound removing artifacts Setup success. Certificates created. Enable in unbound.conf file to use [1668018465] unbound[1:0] notice: init module 0: validator [1668018465] unbound[1:0] notice: init module 1: iterator [1668018465] unbound[1:0] info: start of service (unbound 1.15.0). [1668018465] unbound[1:0] error: udp connect failed: Address not available for 2001:503:ba3e::2:30 port 53 [1668018466] unbound[1:0] error: udp connect failed: Address not available for 2001:500:a8::e port 53 [1668018466] unbound[1:0] error: udp connect failed: Address not available for 2001:503:ba3e::2:30 port 53 [1668018467] unbound[1:0] error: udp connect failed: Address not available for 2001:500:2f::f port 53 [1668018467] unbound[1:0] error: udp connect failed: Address not available for 2001:500:2f::f port 53 Dovecot logs: Warning: Problem : timeout. Will retry in 8 seconds. 7 retries left. 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0curl: (6) Could not resolve host: www.spamassassin.heinlein-support.de Warning: Problem : timeout. Will retry in 16 seconds. 6 retries left. 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0curl: (6) Could not resolve host: www.spamassassin.heinlein-support.de Warning: Problem : timeout. Will retry in 32 seconds. 5 retries left. 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0curl: (6) Could not resolve host: www.spamassassin.heinlein-support.de Warning: Problem : timeout. Will retry in 64 seconds. 4 retries left. 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0curl: (6) Could not resolve host: www.spamassassin.heinlein-support.de Warning: Problem : timeout. Will retry in 128 seconds. 3 retries left. 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0curl: (6) Could not resolve host: www.spamassassin.heinlein-support.de Warning: Problem : timeout. Will retry in 256 seconds. 2 retries left. Uptime: 2392 Threads: 20 Questions: 3342 Slow queries: 0 Opens: 127 Open tables: 118 Queries per second avg: 1.397 The user `vmail' is already a member of `tty'. % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0curl: (6) Could not resolve host: www.spamassassin.heinlein-support.de Warning: Problem : timeout. Will retry in 1 seconds. 10 retries left. 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0curl: (6) Could not resolve host: www.spamassassin.heinlein-support.de Warning: Problem : timeout. Will retry in 2 seconds. 9 retries left. 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0curl: (6) Could not resolve host: www.spamassassin.heinlein-support.de Warning: Problem : timeout. Will retry in 4 seconds. 8 retries left. Quote Link to comment
aronmal Posted February 28, 2023 Author Share Posted February 28, 2023 Hey, ich hatte zum Glück seit langem keine Probleme gehabt. Habe aber auch relativ nichts verändert in der Zeit. Ich bin im Moment einiges am recherchieren, da wir demnächst zu Telekom Glasfaser wechseln und ich im gleichen Zuge einiges an meinem Netzwerk ändern wollte und voraussichtlich im Sommer ein Raspberry Pi Cluster mit Kubernetes aufsetzen will. Ich möchte demnächst nochmal IPVLAN ausprobieren, da IPVLAN mittlerweile die default Einstellung. Ich bin eben über diesen Post gestoßen bezüglich Kernel Panics welcher unter dem 6.11.4 Release zitiert wurde. Hattest du das daher schonmal gesehen @ich777? Da mailcow nicht für Kubernetes gedacht ist wird es daher auch weiterhin bei mir auf Unraid bleiben, muss nur sehen was da das Problem mit IPVLAN war. LG Quote Link to comment
ich777 Posted February 28, 2023 Share Posted February 28, 2023 1 hour ago, aronmal said: Ich möchte demnächst nochmal IPVLAN ausprobieren, da IPVLAN mittlerweile die default Einstellung. Ich bin eben über diesen Post gestoßen bezüglich Kernel Panics welcher unter dem 6.11.4 Release zitiert wurde. Hattest du das daher schonmal gesehen @ich777? Ja, das empfehle ich auch immer. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.