MyNameWasTaken Posted January 26, 2023 Share Posted January 26, 2023 I was having tons of issues getting the OS to load, tried with a fresh setup on the same flash drive but just sits here and gets nowhere. Memtest all day yesterday tells me all the RAM is fine, not sure if all the data on my array is lost but I can’t even get the OS to load at this point. Quote Link to comment
itimpi Posted January 26, 2023 Share Posted January 26, 2023 1 minute ago, MyNameWasTaken said: not sure if all the data on my array is lost Every array drive in an Unraid system is a self-contained file system that can be independently read on any Linux system. Quote Link to comment
MyNameWasTaken Posted January 26, 2023 Author Share Posted January 26, 2023 2 minutes ago, itimpi said: Every array drive in an Unraid system is a self-contained file system that can be independently read on any Linux system. Well that’s good at least Quote Link to comment
JorgeB Posted January 26, 2023 Share Posted January 26, 2023 Try a different flash drive with a fresh install. Quote Link to comment
MyNameWasTaken Posted January 26, 2023 Author Share Posted January 26, 2023 53 minutes ago, JorgeB said: Try a different flash drive with a fresh install. Okay. If that works I need to transfer my key, right? Quote Link to comment
Solution trurl Posted January 26, 2023 Solution Share Posted January 26, 2023 20 minutes ago, MyNameWasTaken said: Okay. If that works I need to transfer my key, right? Ideally, you need to transfer your whole config (config folder from flash), which is all settings from the webUI including disk assignments. Do you have a current backup of flash? Quote Link to comment
MyNameWasTaken Posted January 26, 2023 Author Share Posted January 26, 2023 54 minutes ago, trurl said: Ideally, you need to transfer your whole config (config folder from flash), which is all settings from the webUI including disk assignments. Do you have a current backup of flash? I grabbed the config folder before I overwrote my current flash but I’m not sure if it’s something in there causing issues. Quote Link to comment
trurl Posted January 26, 2023 Share Posted January 26, 2023 19 minutes ago, MyNameWasTaken said: not sure if it’s something in there causing issues You can edit config/docker.cfg and config/domains.cfg to disable Docker and VM Manager, then boot in SAFE mode so no plugins will load and see how it goes. Quote Link to comment
MyNameWasTaken Posted January 26, 2023 Author Share Posted January 26, 2023 Please don't mind me, everyone. I'm just a f***ing idiot. After I ran memtest I also updated my BIOS and that reset the clock. I corrected the time and everything is working. I'm going to go die of embarrassment now. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.